Safari 6 stalling DSL connection

Here I am with the exact same issue Safari 5 had when it was released.
I installed Safari 6 on my MacBook Pro whilst waiting for my Mountain Lion to download. I like the new changes and the page rendering seems to be super fast. But it keeps stalling my DSL connection. I know it's not an Airport problem, and it's not my MBP (other devices on the network are unable to load pages once the connection has stalled); which leaves just the modem and connection. Connection is fine when I'm using Chrome.
After upgrading to Mountain Lion, the issue was still present. So i backed up and did a clean install of Mountain Lion and still no joy.
Advice, suggestions, and resolutions very much appreciated.
Thanks,
Transltr

Yeah I am having the same issue - befor and after ML. Following on from the same issue, online documents ie. google spreadsheets become un-clickable, youtube videos do not stream smoothly...

Similar Messages

  • Safari freezing up - dsl connection

    hi.
    this just started yesterday, so I am not sure what is going on. but here goes.
    I have DSL 6.0 for a month now and it has been great. Until last night when I was just surfing around and I couldn't get Yahoo to load. I then attempted to access my router / DSL modem. No luck. had to kill safari, then nothing would connect. Email, web browsers, etc.. Only a restart freed it up.
    I ran tests on modem, router, reset/powered them off etc. Same thing happed after just a few minutes of surfing.
    Out of ideas, I decided to RESET Safari. That seemed to help as it did not freeze up again this morning. usually happens after about 10 mins of surfing.
    I don't think it's the DSL line or my Di-624 router.
    Any ideas, thoughts or suggestions?

    Doesn't sound like a Network issue to me either. Try Safari from another User Account.
    If you are not sure how to set up another account,here is guidance from Apple. You can ignore step 7 in the article.
    Also, on the system preference>Accounts panel, click on "log-in" options. There, select "fast user switching". This allows you to go back and forth between user accounts via an icon in your Menu Bar at the top of the computer screen.
    Log-on to the new account and start Safari. If the sites are accessible in the new account, then your problem is specific to your regular user account. Otherwise, similar response means a system-wide problem.
    Post back

  • Safari freezing  and no connectivity afterwards- DSL Connection -

    hi.
    this just started yesterday, so I am not sure what is going on. but here goes.
    I have DSL 6.0 for a month now and it has been great. Until last night when I was just surfing around and I couldn't get Yahoo to load. I then attempted to access my router / DSL modem. No luck. had to kill safari, then nothing would connect. Email, web browsers, etc.. Only a restart freed it up.
    I ran tests on modem, router, reset/powered them off etc. Same thing happed after just a few minutes of surfing.
    Out of ideas, I decided to RESET Safari. That seemed to help as it did not freeze up again this morning. usually happens after about 10 mins of surfing.
    I don't think it's the DSL line or my Di-624 router.
    Any ideas, thoughts or suggestions?

    For Safari freezing. Go to the Safari menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.
    If that didn't help, could be a Safari third party add on that was compatible with the prior verion of Safari but not 5.1
    Troubleshooting help here >  Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    For Wi Fi:
    Go to /Library/Preferences/System Configuration.
    Move all the files in the System Configuration folder to the Trash.
    Restart your Mac.

  • How to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    how to configure one dsl connection and one public ip in cisco router and map to one interface for using exchange server

    Hi ,
     Have you got any additional public IP Address from your service provider , If yes on router you can have static route for those additional IP Address pointing to your ASA  outside interface . 
    Accordingly you can configure NAT 
    HTH
    Sandy . 

  • TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

    Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

    Have you tried a simple reset of your iPod to see if that helps?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • Can I create a home network withous dsl connection with airport express

    can I create a home network without dsl connection with airport express?
    So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

    You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network. 

  • Connecting 2 RV042 to different subnet and DSL connections

    Small office, 2 RV042, 2 DSL connections. 1 is used striclty for the business side, and the other is for our CCTV network. They also have seperate DSL connections as we have 2 external IP address for clients to connect remotely. We don't want to take away our exisring setup, but would like to bridge both networks so a few of our internal clients can connect to our CCTV network and use some of the devices. Right now they come in on VPN but its not as fast.
    Is this doable without adding additional hardware? Both networks need DHCP enable as well.
    Breakdown:
    DSL 1
    |
    RV042
    |
    192.168.20.X
    |
    | Would like to somehow join the 2 networks together.
    |
    DSL 2
    |
    RV042
    |
    192.168.40.X

    Hi Matt, you may utilize 1 RV042 router and host the dual wan for each connection then bind the appropriate services to the WAN. You then may enable the multiple subnet feature on the router to allow both separate LAN IP network communication through the LAN.
    Next you can make very specific firewall rules for the specific services.
    The caveat of this router firewall is that it has a default state table. To bypass the default state table you will need to make such a deny all rule for every field.
    Then make a service rule to permit source ip to destination IP using which WAN for what service. (Confusing isn't it?)
    Reference this topic to get an idea what I'm talking about.
    https://supportforums.cisco.com/message/3828616#3828616
    -Tom
    Please mark answered for helpful posts

  • Flaky DSL connection

    I have a DSL connection through Verizon that requires a username and password to get connected and once connected is always on. Now when I set this up with the DSL Modem/Router(it is a full router with all capabilites for networking like Linksys or Airport but a generic Westell verison) I inputted my username and password to log into the DSL Network. It has some firmware on it that requires the username and password be inputted into the router for the internet to connect properly. In the connection properties of the router it has DSL connection "connected/not connected" and Internet connection "connected/not connected". Also on my AEBS I have inputted my username and password for the DSL connection also.
    It is working like this:
    My DSL Modem/Router connects to the internet using my username and password. DHCP is disabled and wireless is also disabled. So it is acting like a bridge to just supply the internet connection. My AEBS is setup with the same username and password setup under PPOE over Ethernet. It has DHCP enabled with NAT and also my wireless network setup.
    The question is since I have my username and password for the DSL incorporated into both Routers could that cause a problem with my connection? I am seeing connection drops and drops in bandwidth also. It will go anywhere from 50 KB to 160 KB and flux in between. I want to make sure before I go after Verizon for bad service. If its my fault I want to know before I accuse them of bad connections.
    I was thinking of either setting up the DSL Router w/ my username and password and setting AEBS to just Ethernet and let it do everything else or take my username and password out of the DSL Router and just let my Aitport make the connection. Which would be best. Thanks in advance.
    iMac G5 2.0 Ghz 1 Gig RAM, AP & BT, 400 Gig HD   Mac OS X (10.4.8)   iBook G3 700 Mhz 640 MB RAM Airpot

    If i enable DHCP on the westell router it will give my AEBS a DHCP address and it will not function properly. I tried going through and disabling DHCP on my AEBS but it said to use PPoE you should leave DHCP enabled. Now if i remove the PPoE status on my AEBS and enable just Ethernet nothing goes throuh from that point on. It gets the IP from my router but then nothing functions. I was trying to figure out a way to let the westell be a gateway and make my PPoE connection for me and then once it hits the airport for it to distrubute IPs and do my wireless. The westell routr is generic and doesn't have many options. it came with my DSL setup package.
    Now i did notice on the router it does have a routing table. Is it possible to setup a routing table to go straight to my AEBS and let it take it from there?
    This is getting complicated now. I do tech support for networks for my day job and I have nevr seen anything this difficult to get working right. I think i might just call Verizon and try to get a dsl modem w/o a router and let my airport handle everything.

  • DSL connection gets slower than dial up at night

    For the last week my DSL connection has been getting really slow in the late afternoon and evening. It is fine in the morning. Also in the evening I have started getting error messages such as Request Timeout, The connection was reset while the page was loading, and Can't find DNS server. Verizon has tried to blame my laptop, but the same thing happens with my two desktops and my wife's desktop. Verizon has also tried to blame my Belkin router, which I took out of the equation by hooking the DSL modem directly to my laptop. The modem is a Westell 6100G.
    Could there be too much traffic through the CO in the afternoon and evening that is affecting my connection?
    I have run the Verizon speed test with the following results:
    Broadband Speed Test
    Analysis information:
    Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
    SendBufferSize set to [261360]
    running 10s outbound test (client to server) . . . . . 330.89Kb/s
    running 10s inbound test (server to client) . . . . . . 779.59kb/s
    ------ Client System Details ------
    OS data: Name = Windows 7, Architecture = x86, Version = 6.1
    Java data: Vendor = Sun Microsystems Inc., Version = 1.6.0_31
    ------ Web100 Detailed Analysis ------
    Client Receive Window detected at 135024 bytes.
    Cable modem/DSL/T1 link found.
    Link set to Full Duplex mode
    No network congestion discovered.
    Good network cable(s) found
    Normal duplex operation found.
    Web100 reports the Round trip time = 944.73 msec; the Packet size = 1392 Bytes; and
    No packet loss - but packets arrived out-of-order 0.24% of the time
    This connection is receiver limited 37.82% of the time.
    Increasing the the client's receive buffer (131.0 KB) will improve performance
    This connection is sender limited 52.94% of the time.
    This connection is network limited 9.25% of the time.
    Web100 reports TCP negotiated the optional Performance Settings to:
    RFC 2018 Selective Acknowledgment: ON
    RFC 896 Nagle Algorithm: ON
    RFC 3168 Explicit Congestion Notification: OFF
    RFC 1323 Time Stamping: OFF
    RFC 1323 Window Scaling: ON
    Information: Network Middlebox is modifying MSS variable
    Server IP addresses are preserved End-to-End
    Information: Network Address Translation (NAT) box is modifying the Client's IP address
    Server says [71.119.134.43] but Client says [192.168.2.2]
    Here are my Transceiver stats:
    Transceiver Statistics
    Transceiver Revision
    3.3.6.10.0.1
    Vendor ID Code
    4D54
    Line Mode
    ADSL_2plus
    Data Path
    INTERLEAVED
    Transceiver Information
    Down Stream Path
    Up Stream Path
    DSL Speed (Kbits/Sec)
    928
    287
    Margin (dB)
    25.4
    27.2
    Line Attenuation (dB)
    36.5
    15.2
    Transmit Power (dBm)
    17.8
    12.0
    Solved!
    Go to Solution.

    NDT Test is not showing packet loss yet the line sounds like it's behaving like there is a ton of loss occurring. I'll see if I can get someone. It's hard to say how Verizon has things set up but if 1Mbps is the top speed in your area and the sync rate was set that low deliberately rather than by some sort of provisioning accident, I wonder if your DSLAM is fed by bonded T1 lines. Not too uncommon to find that still to this day where DSLAMs are not fed by Fiber especially in very rural areas.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Flashing amber with DSL connection

    I have a flashing amber on Airport Extreme.  I have DSL connection to the internet via Cat5e cable through the Airport, but no wireless signature and cannot find it with the AirPort Utility scan.

    Plug the computer in by ethernet to the do the setup..
    Is the DSL modem router?? then the AE should be in bridge mode.
    You can then setup AE to create a wireless network.. and give it a suitable name.. remember in the Windows world names should be short,, 2-20 characters.. no spaces and pure alphanumeric.

  • TS1398 I am having trouble with safari dropping most Internet connections most every time I'm on.  This is a first generation iPad. Can this be cried?

    II am having trouble with safari dropping most Internet connections most every time I'm on.  This is a first generation iPad. Can this be cried?

    This issue was resolved! I didnt think about restoring my computer to factory settings but I did and now my computer works like brand new. basically, just back up your files and do the following:
    http://www.youtube.com/watch?v=yPmT5Xbb8p0

  • Multiple WLANs & DSL connection

    Has anyone had any experience with configuring multiple WLANs feeding into a single DSL connection?
    I need to set up WLANs in 4 separate rooms that each have single cable back to a switch and a DSL connection.
    The idea is that each room will be stand-alone as far as the WLAN is concerned and when they need Internet access they plug into the Ethernet port in the wall which is cabled back to the switch and DSL.
    Each room will have a 4-port wireless router with DHCP server configured (the 4-ports are for those without wireless). Initially security won't be an issue but we realise that VLANs will probably be required down the track and a managed level-2 or 3 switch will be required. For now we are happy to just use separate wireless routers with minimum security.
    I am assuming something like a WRT54G will do the job but how to configure the WLANs? Different SSIDs and channels? Could we use different networks (eg 192.168.1.x and 10.0.0.x) and then would we need to bridge them etc?
    K

    Hi .. you can definitely configure the routers in the way you have described. You will have to set up different ssid and channel on each router in each room. Also you have to use different networks.Say eg 192.168.1.1 on the 1st router and 192.168.2.1 on the 2nd router and so on.

  • Unable to configure PPPoE in Cisco 877 for DSL connectivity

    Hi,
    I am trying to setup a DSL connection with Cisco 877 as the CPE. The CLI does not list the option of PPPoE for protocol in the vpdn group config prompt. If i manually enter PPPoE as the encapsulation, the vpdn group configured vanishes from the config!
    Any clues? Has anyone got a sample config for a cisco 877 connecting to DSL through PPPoE. I followed the sample config in the TAC website giving the example for cisco 827-pppoe -DSL.
    Some more inputs - as soon as i connect the DSL line the ATM interface line protocol comes up but unable to see anything in debug vpdn or debug ppp auth. The router IOS feature set is Advanced Security services.
    Regards
    NSG

    Hi Gnanavel,
    You need bba-group instead :
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ftpprfls.htm#wp1088274
    http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541b8.html#wp1027195
    Thanks and Regards,
    ~Zulfiqar

  • DSL Connection Very slow ONLY when using wireless router

    My DSL connection was running super slow (approx 136 Kbs) - I disconnected the Linksys wireless router and plugged by DSL modem directly into the computer.  Then my internet speed increased to 1.4 Mbs (a 10 fold increase).
    Any suggestions on how / why my speed drops so extensively when using the Linksys wireless routher (wrt45g).
    Thanks

    Are you using the same test each time to measure the speed?
    The reason I ask is that Windows usually reports its download speed in KB/sec (Kilobytes per second).  But most web (internet) speed tests report their speed in Mbps (Megabits per second.)
    A 1.4 Mbps line will typically pass data at about 140KB/sec.
    To help determine what kind of problem you are having, do the same speed test in 3 different ways:
    1)  Connect one computer, by wire, directly to your modem
    2)  Connect one computer, by wire, directly to your router  (all other computers and network devices should be off).
    3)  Connect one computer, wirelessly, to your router  (all other computers and network devices should be off).
    Report back your results, and also, please state what line speed you are paying for.  Once we have this, we will hopefully be able to help you. 

  • After Updating Mountain Lion, Mail & Safari keep crashing; WLAN Connection fails

    After Updating Mountain Lion, Mail & Safari keep crashing; WLAN Connection fails;
    I have updatet Mountain Lion and since then, Mail & Safari keep crashing plus: WLAN Connections keeps on failing from time to time.
    My Router has the newest firmware, i am clueless what to do.
    I even cannot shut down my mac properly.

    Hello you all,
    I also had the problem of a disconnecting wifi while my imac was sleeping. I did not have the reconnecting issue after sleep, but the lost connection issue during sleep which made it impossible to reach my imac for things like homesharing, apple tv or remote desktop. I have a late 2012 iMac with a clean ML 10.8.2 on it and wirelessly connected to an apple time capsule (same as an airport extreme). My partner has a mid 2007 iMac, also with an ML 10.8.2 on it.
    I tried every single solution I could find on the internet, such as changing the router's security from wpa2 to wpa, changing the MTU from automatic to manual 1453, router reboots, re-installations, re-configurations, keychain clean-ups, everything.
    Eventually I solved my problem with these steps and now it works as a charm. I can still find the iMac with the remote app, even after 12 hours of sleep:
    My time capsule router is set on automatic MTU and encrypted with WPA2 and I use  the 5Ghz network!
    1. Cleaned all the wifi passwords in keychain on my iMac
    2. Created a new network location in system preferences
    3. In this location I deleted the bluetooth pan and bluetooth dun connection.
    4. In this location I changed the preferred connection-order to wifi on #1 and ethernet on #2.
    5. Restarted my iMac.
    Now I still have a connection when it sleeps and I can wake it to low profile using the remote app (homesharing) and everything works fine.
    Hope more people wille be helped by this.

Maybe you are looking for