Safari 7.0.1 not showing images

Safari isn't showing images for certain websites. For instance, I'm trying to view a Big Cartel shop and the images won't load at all, even though the links are there. I checked in Firefox and Chrome, both work properly. Any suggestions?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

Similar Messages

  • Safari 2.0.3 Not showing images, flakiness, etc

    Hello, I am an advanced Mac Tech who just upgraded to Safari 2.0.3 (with Mac OSX 10.4.4). As of this morning I am noticeing flakiness.
    When I go to all my usual pages, I am noticeing that all the images with the within the web pages are not drawing, just empty 'placeholder' boxes
    Background: I have done all the "obvious" troubleshooting:
    Repair permissions before and After Install (including fsck)
    Reinstalling the combo Updater 10.4.4.
    Emptying Safari Cache.
    Onyx 1.6.6 to clear all caches, etc.
    Toggling the "block Pop-Up Windows" command to see if changes.
    Enabling the Debug menu, emulating different bowsers.
    Still, no success. Images are being blocked.
    If I use Internet Explorer 5.2.3 or Firefox 1.5. all pages/images draw normally. It's definitely isolated to Safari 2.0.3
    Anybody got any "Advanced" ideas?
    Thanks

    OK, it got fixed:
    Finally, I just got rid of the "com.apple.Safari.plist" preference, rebooted, and everything went back to normal, and it even seemed to have come back with most of my custom preferences intact. hmm.

  • Mobile Safari not showing images

    Hi there,
    Since upgrading to 4.01 and then 4.02 on my iPhone, Safari seems to intermittently not show images on websites... does anyone know the reason for this and a solution?

    I am having the same issue. I have found in my case the site I was working on is pulling content from JSON and the mobile app is using a Cache Manifest file. When I removed the manifest file reference I could see the images again.
    Message was edited by: Adam Randlett

  • My mac will not show images when on the internet?

    My mac will not show images when on the internet?  I think I have inadvertently changed some settings but nor sure which one.

    I am going to assume you are using Safari here. If so then go to the Apple menu bar and hit Safari-> Preferences.  Under the Apperance tab there is a check box that is called "Display images when the page opens".  Check if that is unticked.

  • Muse 7.0 plus Chrome: browser does not show images full browser width

    Hi there,
    I have a serious problem with the latest Muse version: the images which I use as parallax-masks for the background won't work with Chrome, though Safari and Firefox are not showing any problems. The issue: Chrome does either not scale the images to 100% browser-width or does not show them at all, or even shows the images cut into narrow stripes. This problem did not show in the previous version of Muse.
    Of course I already restarted application and computer. System: Mac OSX Mavericks.
    What to do now? The presentation with the client is very soon and this bug makes me very nervous.
    Best,
    bartl

    The problem bartl encountered and reported was fixed by the 7.1 release (November 21st). The problem you're describing sounds different.
    As of yet, I'm unable to reproduce what you're describing. The URL you've provided views the same in all the browsers I've tried, Chrome (32.0.1700.77) and non-Chrome, Mac and Windows.
    That said, looking at your master page I don't think you've created what you intended. At present there are two full screen slideshows on your A-master. On contains no images and the other contains a single image. Both are set to have thumbnails and the thumbnails container is off the right side of the page.
    If you look at your "Master Slideshow" layer in the Layers panel, you'll see the two slideshows. I think you'll want to delete one of them and, given your design, turn off thumbnails for the remaining one.
    Also, if you don't plan to have multiple images in the full screen slideshow, you'd be better off using a background fill image rather than the slideshow widget.
    I remain a bit puzzled how/why you're seeing different behavior in your instance of Chrome. Have you cleared your browser cache?
    On an unrelated note, if you set the page fill and stroke to none and set the browser fill to the most common color from the garage door image, it will avoid the momentary appearance of a white page on a grey background when your home page first loads. Instead the site visitor would see a blank page that's the most common color from the slideshow image, until that image loads.

  • Amazon and FaceBook not showing images

    I had a software issue and had to wipe my macbook. Since then, Safari will occasionally not show images on Amazon and sometimes FaceBook. Usually a clean of the history will fix it but sometimes it doesn't. I am not running any extensions and everything is up to date. Any idea what could be causing this?

    Hello Clement! (Be careful in what you post to the Internet, your name is in the screenshot, just sayin' If you want to be able to blur things in screenshots before posting them, try Skitch, it's a free app on the Mac App Store)
    In the past, I've seen this being caused by ISP's DNS servers.
    Try the following:
    Unplug your modem from the power, wait a minute, and plug it back in. If your issue is solved now, celebrate
    If not solved, however, try and see if you have the same issue on another network.
    You can also change the DNS server you use to something like OpenDNS. There is a guide here, preferably set it up on your router, but if that's too technical, try setting it up on your Mac only: https://store.opendns.com/setup/?__utma=247635969.764677354.1418757510.141875751 0.1418757510.1&__utmb=247635969.3.10.1418757510&__utmc=247635969&__utmx=-&__utmz =247635969.1418757510.1.1.utmcsr=google|utmccn=%28organic%29|utmcmd=organic|utmc tr=%28not%20provided%29&__utmv=-&__utmk=7372593#/
    One last thing about changing DNS servers. Really, your internet provider should be more than capable of serving you pictures from Amazon and Facebook (by the way, most of these pics are not hosted by Amazon and Facebook really, but by an outside company called Akamai that a lot of large companies use. So I should probably be saying: "your ISP should not have any trouble serving content from Akamai's servers")
    Hence, the proper advise I should give you is: contact your ISP and ask them if they've been having DNS issues lately. Barring that: you can save yourself some helpdesk pain and use OpenDNS or Google DNS.

  • HT2474 when I am opening any application including safari, these icons are not showing in dock, how to get open applications in my dock?

    when I am opening any application including safari, these icons are not showing in dock, how to get open applications in my dock?

    This could be a plist corruption problem, but I'm not sure.
    Sometimes, the preference list files get corrupted. You can usually just remove them and they'll get re-created. This may require you to reset certain settings. A notable exception to this is the Mail plist which actually stores the Library structure of your email accounts. Deleting the Mail plist will definitely cause lots of problems, but is recoverable.
    The plist files are stored in the /Users/username/Library/Preferences/ folder. They usually have the naming convention of com.company.programname.plist.
    A simple troubleshooting technique is to move a suspect plist file out of the Preferences folder and start up the app, again. It will re-create the plist from scratch.
    In your case, I would try the com.apple.dock.plist. You can use Activity Monitor to kill the Dock app and it will restart. Or, you can log out and log back in.
    There is a new file with Leopard called com.apple.dock.db. I haven't figured out what it does, but you might try moving it out. If anything gets worse, you can move the old file back in replacing the newly created one.
    This all sound somewhat odd, so I don't know if this will help.

  • Jdeveloper visual editor do not show images and other component shapes

    I used jdeveloper(10.1.3.3.0) to create an ADF BC application, I create a jsf jsp file and drag and drop components from ADF Faces Core to this file visual editor, but jdeveloper visual editor do not show images and other component shapes.
    Could you tell me how I can fix this problem?
    Thanks,
    Mike

    Actually, I need to make a dummy change to the jsp file and then it will display boxes representing the objects in the visual editor whereas I get an exception in the log:
    javax.servlet.jsp.JspException: Cannot find FacesContext
    This does not talk much to me !
    Thanks

  • JList not showing images

    Have raised a thread giving details of the problem in Java2D forum
    JList not showing images
    Have anybody experienced this issue? I face this issue only when i use swingworker and only for small images (few kBs). It works fine for large images (More than 1MB files). I use Win 7.
    Regards,
    Sreram

    One, do you say because i set the model each time, sometimes the list is not getting repainted? I didn't say that. It's just good concurrency practice to only manipulate models on the EDT, particularly when SwingWorker easily allows the break up of loading the images in a background thread and updating the model on the EDT through the publish/process methods.
    Will the splitting up of worker as process chunks be of any use? Again it's just a good habit to get into for concurrency reasons.
    As for your repainting issue, try changing this line
    item.setImage(getImagefromFile(f)); to
    item.setImage(new ImageIcon(getImageFromFile(f)).getImage()); The ImageIcon class uses MediaTracker to synchronously load images (you can use your own if you want). If you're getting your images via the Toolkit.createImage# methods, then the images need to be loaded. Usually what happens is the toolkit image will get loaded when first drawn. The component that's doing the drawing gets repainted as more of the image comes in. But in the case of a JList, that component is the cell renderer pane and it doesn't care about repaint() calls. So changing the above line will insure the images are already loaded and ready to draw when first shown. tjacobs01 post reminded me of this.

  • My Safari preferences menu does not show "security"

    My Safari preferences menu does not show the option Security (only lettering types) wahat do I have to do?

    Click the little "pill" icon (upper right of the window) to expand all the tabs.

  • The monitors of on location CS3 not showing image from Sony FX7

    O.L records OK and plays back but at no time do
    any of the monitors show an image. Was OK in Vista now gone to Windows 7
    Pre Pro CS3 ok on 7 (capture and playback.) Any suggestions please

    Dear Sir, Many many thanks for your very detailed answer everything works just fine. I'm not sure wether I should reply to your answer elsewhere please advise me if this is the case.
    thanks again William sign on name Breezley.
    Date: Mon, 4 Jan 2010 18:44:18 -0700
    From: [email protected]
    To: [email protected]
    Subject: the monitors of on location CS3 not showing image from Sony FX7
    Breezley,
    OnLocation CS3 used Direct Draw to create the video window.  In Vista, you may have noticed that OnLocation CS3 would disable 'Aero' themed desktops as they did not support Direct Draw.  Windows 7 does not have this functionality, so you must disable the Aero theme manually to see the video in OnLocation CS3.
    To do this, right click on open desktop and choose Personalize.
    This will display available Themes.
    Scroll down to the 'Basic and High Contrast Themes'.
    Choose any one of the basic or high contrast themes.
    Restart OnLocation CS3.
    This should bring your video back into view.
    >

  • Mail does not show images anymore server stopped responding on my iPad 2 when attempting to browse web

    Over the last couple of days my ipad 2 has started to play up. First the mail would not show images in mail then when trying to browse the web it now will not open any pages. I have attempted a wipe & reload but still no difference.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • Bridge CS3 not showing images

    Today Bridge CS3 partially stopped working.  Images do not show up in the content window but this is inconsistent.  It happens with only selected folders.  The data under filters does show the folder data.  If I try to open (clicking on) a non-existent image in the content window, PS or Camera RAW will open for that image.  I have one internal HD and 3 external LaCie drives.  Copy an affected folder to a different HD or to the desktop sometimes works but only intermittantly.  All the permits, etc. for the folders are the same, read/write permission granted and everything else the same.  Sometimes folders that previously opened do not open at a later time.
    I've tried restarting the computer and Bridge, no difference.  Two events occurred prior to the problem.  I installed Apple's latest security update and the new Adobe Reader update.  Other than that nothing particular occurred.  I am also using Lightroom2 which is working OK.  The image are in the folders OK, open in PS, etc.  They just don't show up in Bridge.
    My computer skills are medium, been user since Photoshop 6.0, taken a number of PS workshops at SFW and Maine, and am competent at using the program.  This is over my head. Help.
    Bob Gaunt

    Thanks Ramon,
    It works but with a few other problems I pretty well sorted through.  It took a couple of Bridge quit and restarts to get Bridge to open the external drives. Now that's OK.  Then it seems at times to hang up trying to generate thumbnails, have to force quit Bridge and try over.  Since Bridge worked fairly well for several years, I'm wondering what happened.  Maybe just one of life's mysteries.
    I have CS4 on the shelf, installed it and couldn't get the drivers for my Epson 2200 installed.  The CS4 included generic driver is junk, Epson quit supporting the 2200, so I re-installed CS3 for the time being.
    Bob

  • Not showing image in basic copy gif image icon and place on html page

    Trying to do a basic copy gif image icon and place it on a basic html page.
    The image shows up in my local page and shows on remote side but when I go to view in browser it does not show as a image. It shows the border but no image.
    The directions were (working with windows xp and IE8)
    Download the image to your C:\temp folder.
    4. Copy the gif file from your C:\temp folder and paste it in the same folder where your .html or .asp file is.
    I copied the image with right click save as in many different areas of computer. I even put on desktop.
    I add image and it shows on the site I am working in but when putting to remote side it does not view as an image on the browser.
    I have cleared cashe as well as pressed cntrl/refresh and still nothing.
    Other images work and show.
    on-line-vacations.com
    Thanks!

    Basic assumptions:
    You have Defined a site.
    All files reside within the defined site (including image files)
    All files use the appropriate file extensions, for example, image.gif
    You have saved and uploaded all site files to your server.
    You are EXACTLY naming the source image (no errant capital letters) in the link.
    If your other images are linking properly and showing, delete this image and insert it again (or re-link it to the image file within your site structure).
    Z

  • FF5 does not show images that are 'moved permanently' (http response 301)

    Our web app shows maps from OpenStreetmap. The webapp is secure, that is, is uses HTTPS. Now, IE complains horribly when the web page tries to load <img> via HTTP, because it's mixed content that that is considered baad.
    So our webapp serves the images by responding via HTTPS with a 301 (moved permanently) to the real OpenStreetmap URL (with is HTTP). That fools IE to not complain.
    Now, Firefox 5 suddenly does not show the map images AT ALL. This has worked beautifully with previous version (and all other browsers).
    What's wrong?

    I fixed the problem.  (YAY!)
    It was the way I embedded the files -- the Dreamweaver default does not work properly so I used the embed from this generator: http://www.bobbyvandersluis.com/swfobject/generator/index.html#alternativeContentHelp which now lets my navbar and swfobjects load properly.  I also made sure that my slideshow (loader.swf) was set with wmode = opaque while the navbar is set to wmode = transparent.  The div for the nav bar has z-index set to 5 while the div for the slideshow has z-index set to 1.  Both have absolute positioning.  I hope this helps anyone in the future that has trouble with overlaying flash (.swf) files.
    Thanks for your reply and trying to help me solve this issue!

Maybe you are looking for