Safari 7.1 creates problems with drop down menus from some sites

I blindly install Apple updates, but with Safari 7.1 I run into problems with the drop down menu of www.arcweb.com. As this is my main client it is a big problem. Any suggestions or solutions?
thanks
Jean

Empty Caches.
1. Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
2. Quit Safari if open.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Look for the folder 'com.apple.Safari"
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.

Similar Messages

Problem with drop down menus in firefox 4

when I scroll over a drop down menu, for example when I right click and put the cursor over one of the options it goes black. If I scroll over one of the menu bar drop down menus as I move over one of the options it stays highlighted in gray. I am running firefox 4 and have already tried turning on the menu bar and turning off hardware acceleration

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

Problems using drop down menus in safari v7

I am having problems using drop down menus in safari v7. e.g. on the BMW used cars website (http://usedcars.bmw.co.uk), there's a drop down box for location. This only goes up to 50 miles on my macbook but goes up to national on my iPad. Any ideas?

Thanks Peter, Dale. Looks like it is back to the drawing board for me then!
I tried to import it through MS Word but iPad doesn't support the document. Looking into converting document into a Numbers spreadsheet as it has drop down boxes but unfortunately need to buy the £6.99 numbers app for iPad to make it worthwhile. Might just stick to good old fashioned "cross out the answers that don't apply" using pen and paper..................

Fire fow will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Firefox will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will lose all personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How can I correct the problems I've been experiencing lately with drop-down menus in general as well as and leading of text. It 's occurring on both Safari and Firefox browsers.

The above headline pretty much covers the problems.
Access to the drop down menus is erratic. Sometimes it's problem-free, but at other times it's impossible to see the options on the menu, or if they are visible, it's impossible to effect a change by clicking on one of them. The times I notice it most is when I am trying to change fonts or font sizes, but it occurs at other times, as well.
It's also frustrating to have to deal with double spacing (for example, when describing items on eBay). Sometimes the text flows normally, but if I force a return, the text that follows usually is double-spaced.
Often, the justification option does not work either.
Occasionally, I can get around one problem or another by switching back and forth between Safari and Firefox, but eventually, the original problem resurfaces.
Because it happens on both browsers, eBay tech support is inclined to think the problem is in my software. (I'm inclined to agree.)
Although they have suggested clearing the history in FF, that option must have been relocated, because it'sno longer under the "Tools" menu, where it was in the past. I also can't find the clear your cache option on OS Safari or 10.8.3.

callthescribe wrote:
...Although they have suggested clearing the history in FF, that option must have been relocated, because it'sno longer under the "Tools" menu, where it was in the past. I also can't find the clear your cache option on OS Safari or 10.8.3.
I don't think it'd help much but clearing history is now in the History menu, and setting FF to clear history on exit is near the bottom of the Privacy tab of FF Preferences.
Also, if you don't have the Develop menu in Safari, open Safari preferences, click Advanced, and select “Show Develop menu in menu bar.” You'll find "Empty Caches" there.

I have created a Fireworks nav bar with drop down menus. Can't get the weblinks to save.

I have been trying to add the web addresses in my Fireworks nav bar drop down menus. I can't get them to "take". I add the address, click done and some of them save and some don't. I am pulling my hair out! HELP!

the easiest way is constructing your menu with frame labels
now i have no way of knowing how you are constructing it ..so
this may not work for you ...i assume that you have created a main
button ...that has been converted into a symbol & then
duplicated to create all other buttons
okay here it goes ..i hope i dont confuse you
i will explain how to create 1 button with 4 submenu items
with the trems that i mentioned above
but iam not going to explain all the details of creating a
whole nav bar
because it just takes too much typing ...i assume you already
know this
sooo ! ...lets say this is the Portfoio button ...inside the
symbol now
create 8 layers ...the order is going from top to bottom
actions
labels
submenu Logos
submenu Illustration
submenu Animation
submenu Coolstuff ."you will name your button items how you
like" ...
main button....lets just say Portfolio !
invisible btn for main button
so now on with the hard stuff
create 20 frames ...stop action on frame 1 ...frame 9
...frame 20
on the labels layer now ....name frame1 "Closed" ...frame 10
"Open"
on the submenu Logos layer ...create a keyframe on frame 10
all frames before the 10th frame will be blank frames
repeat that for the rest of the submenu items
on the main button layer you will just place the main
Portfolio button on frame 1
& on the invisible button layer ..the inv btn is going to
be placed on frame 10
all this is iam hoping your have converted everything into1
symbol
all you need to do know is attach code to the main Portfolio
button & the invisible button
so click on the Portfolio button
on (rollOver) {
gotoAndStop("open");
invisible button
on (rollOver){
gotoAndPlay("closed");
& that should be good ...very simple !
then just repeat this process for every button that makes up
your nav bar ....& it doesn't matter if your inv buttons
overlap each other or your main nav buttons are touching each other
peace John

How can I create a rollover drop down menu from a link in Dreamweaver CS5?

Hello all, I am working on a portfolio website and I was just wanting to know if there is any way that I can create a drop down menu from a text link that cascades once the cursor has made contact with the link. I would like to have it in my navigation bar where the Portfolio link is. Basically, my navigation bar looks like this : Home | Resume | Portfolio | Contact. I only want three items on the drop down menu beneath the portfolio link: Traditional Art, Photography, Graphic Design. I would really appreciate any help I can get! Thanks!

Have a look at what Nancy does http://alt-web.com/DEMOS/CSS-Horiz-menu-2.shtml

Problems with pull-down menus

I have been having a lot of trouble with Safari Version 7.0.2 (9537.74.9) since upgrading to 10.9.2. One such problem is with pull-down menus in websites. (This is as distinguished from the pull-down menus of Safari itself.) Many websites have pull-down menus. These website menus do not work effectively in Mavericks. For example, one website that is very important to me has a menu that is longer than the height of my monitor. And the selections that I almost always need are at the bottom of that menu. When I scroll down that menu, the menu proceeds too fast, and I almost always overshoot the selection that I want. At that point, then, Safari stops the operation of the pull-down menu, and I have to reload the whole page.
Safari gets worse. Often I try to print a webpage to PDF. When I pull down the "PDF" menu in the print window, I have to be very, very careful to select the exact selection "save as PDF." If I don't, then Safari crashes, and I get a dialog box asking me if I want the OS to send a notice to Apple. I click "Yes." I wish the button said, "Yes, of course, right now, without delay," but it does not. And then I have to wait for Safari to start up again.
Is there a solution to this problem?

Hi, Cesidio, welcome to Apple's user-to-user discussion forums.
You have the last version of Safari that will work with OS X 10.2.x. You might want to give Firefox a try.

I am having some serious issues with firefox, i can't print anything because it is stuck on fax and I can't use any of the drop down menus on any site

I am having some serious issues with firefox to the point of choosing another search engine. I can't print anything because it is stuck on fax and won't let me change it to my printer when i do try to select my printer it jumps right back to fax. The drop down menus do not work on any of the sites I go to. For example when purchasing clothes and you have to choose a size from a drop down menu I can't do it when I click on the drop down menu it doesn't work at all. I don't have a virus I ran my virus protector and no viruses are present. I don't have any suspicious issues going on with my computer so there has to be something in Firefox that is causing my issues. I tried internet explorer and I don't have any issues there. I hope you can help me because I love Firefox and would really like to continue to use it.

Lots of issues there, main one getting fcpx going again, try deleting the preferences using the utility deveoped by these guys.
http://www.digitalrebellion.com
Try deleting your render files and re-rendering the project.
Start with these and let us know how you go.
Tony

Business Contact Manager 2013 Issue with drop down menus not working correctly and BCM disappearing.

We upgraded from BCM 2007 to BCM 2013. Now the BCM disappears from Outlook occasionally and the drop down menus are confused. for instance when accessing the drop down for phone numbers, the user selects company - but the field for TTY/TDD comes up.
Shows fields that don't exist etc.
The client is using Office 2013 Pro Premium from Office 365 Small Business Premium subscription and BCM downloaded from Microsoft website.
Please let me know what the support avenues are for this product.
Chris Smith

Hi,
This issue may be caused since the BCM was not installed properly.
Please go to Control Panel -> Programs and Features, find Business Contact Manager for Microsoft Outlook and Uninstall it.
Then go to
http://www.microsoft.com/en-us/download/details.aspx?id=36513, download the right version of BCM(32bit or 64bit) and install it.
If issue persists, you may provide the screenshots of the issue, post them to SkyDrive and share it via a link:https://skydrive.live.com/, then we will have a better understanding on the issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Nasty Safari 5.1 problem with drop-downs on Lion

There appears to be a nasty bug in Safari on Lion related to certain types of drop-downs where clicking on the drop-down resets the entire page. I have already encountered it on several webpages. Here is a link to a webpage which shows this behavior.
http://www.sonos.com/login/
If you scroll to the bottom half and try to create a new account, you are unable to do so since the required Country value (via drop-down) cannot be set as it resets the page whenever you click or try to access it via keyboard. I guess it is good to keep Chrome and Firefox around for pages that Safari can't handle, but it would seem that this is something basic that Apple's automated test suites should have caught. Again, it does not happen with all drop-downs, only certain types.

I had the same problem with a site I developed. I found out how to fix the problem here: http://stackoverflow.com/questions/7165086/clicking-safari-5-1-select-menu-refre shes-page
It's a problem with using webfonts on select forms in the CSS. If you disable the webfont on select forms, the problem goes away. Hopefully, Apple fixes the problem soon since it's a major bug. It doesn't just reload the page but it logs you out if you're signed into the site.

Problem with drop down list: on Windows it works, on Mac doesn't

Dear forum,
I am reworking the MultiPageImporter2.5 script by Scott Zanelli; going to add some new features.
So far I added a drop down list so the user could choose on which pages to place a pdf/indd file: odd/even/both.
However I encountered a strange problem: on Windows it works as expected, but on Mac nothing happens when I click the popup. When I write a dialog, I almost always use automatic layout and never encountered such a problem before. But in this script the author uses fixed position for the controls so I followed his coding style:
dLog.pageSideMode = dLog.pan4.add('dropdownlist', [10,110,180,40], ["Odd and Even Pages", "Only Odd Pages", "Only Even Pages"]);
dLog.pageSideMode.selection = pageSideMode;
The drop down list is visible both on Windows and Mac, but on Mac it’s not clickable. What am I doing wrong?
Another question: in the script, the author created three popups. In the code, each popup has a different height (the last element of the “bounds” array) – 60, 88, 33. Does it make sense to make them different if on the screen they look exactly the same (I mean height).
Here’s my version of the script.
I think the easiest solution for me here is to rework the dialog part from fixed to automatic layout.
Thanks in advance.
Kasyan

Hi johniko,
In my version of the script, the user will have to choose a file to be placed directly in the dialog box. The selected file can be saved into a preset. I'm reworking it for another person (not for myself) and that's what he wants.
Regards,
Kasyan
P.S. By the way, you can simply merge all your pdf-files into a single document in Acrobat.

Problem with Drop down by key

Hi all,
      I Inserted several drop down by key in my view at design time. When I try to run the application it displays an error as
java.lang.ClassCastException at com.sap.tc.webdynpro.progmodel.context.Paths.getAttributeInfoFor(Paths.java:202)
My requirement is,
I am getting a table with two fields(key,value) from R/3 I want to display these in the drop down by key box how to bind them to this drop down.

Hi Refer the below link
DropdownList box to display R/3 table
Re: DropdownList box to display R/3 table
see this link for when to use DropDownByIndex (DDI) vs DDK (DropDownByKey) and how populate data from R/3.
Re: webdynpro populating dropdown values programmatically
populating dropdownbyvalue with the r/3 value?
Re: Regarding DropDown Box
/message/2187817#2187817 [original link is broken]
Re: DropdownList box to display R/3 table
create context value attribute and bind to drop down by key
not getting value from DropDownByKey
Dropdown by key
dynamic DropDownByKey
http://help.sap.com/saphelp_nw04/helpdata/en/4a/8613e41629344194e4f40393740d51/content.htm
For DropdownbyKey
http://help.sap.com/saphelp_nw04/helpdata/en/08/13dbfb6e779743bb2ca641ebcb3411/content.htm
For DropdownByIndex
http://help.sap.com/saphelp_nw04/helpdata/en/24/25e08d4ba6c743b55f1d375637ba8d/frameset.htm
Regards,
Saraswathi
Pls reward points for useful info.

Problems with drop-down list: old references still in the model

Hi,
I am getting in troubles with a drop-down list. I configured it as dynamic list and I specified a RFC to get the values. Sometimes when I edit the field I get that the configuration for the dynamic list is lost and I have to specify again the call to the MF. I did this for a couple of times and my surprise is that the old references are still in the source code. I realized of that when I used the alias manager. The old reference were there with ENUM....To check if the old references are called I switched on the flash debug console and I show that the MF is called a lot of times...
Anybody knows how to eliminate these old reference???' One the collateral effects is that the first value of the list is always shown.
Antonio

Hi Antonio, hi Marcel,
the OSS-ID is 0000337147/2007 and the final given answer from SAP was:
<i>Dear Customer,
finally I managed to repreduce your problem,
and it's a bug.
we will aim to fix it in next releases, and the new Flex 2.0 runtime
should handle this case, once it will be availible.
Regards,</i>
So it might be fixed with the actual SP, but I don't know that for sure (I rather doubt it, to be honest).
Best Regards,
Benni
PS: You might avoid the problem of re-defining the entry list, by defining it as a global entry list, not a dynamic. However, the top-most entry will still be shown!

I am creating a template with drop down menus in Numbers. I want to be able to insert options into the middle of my list at a later date if I need to, but I can only insert at the end of the drop down list. Is there a different program I could be using?

I need to be able to add in more options into my drop down list in Numbers at a later time, not only at the bottom but say in the middle of the list. Should I be using a different program that can allow this to work? Thank you!

This forum thread appears to point towards the problem.
Re: Unable to Switch Audio Sync Settings

Safari 7.1 creates problems with drop down menus from some sites

Similar Messages

Maybe you are looking for