Safari 8 won't open any links in new tabs or new windows

After I updated to Yosemite safari no longer works properly. Whenever I try and open a new tab it does not show up unless I click on the button. Then once I do it shows an empty tab. It does this if I try and open a new link in a tab as well. It will only show an empty tab. Also, If I try and open up a new window or a link in a new window it either won't do it or it will act as if it is going to do it, but only result in the spinning will. Then it will freeze and i'll have to force quit out of it.
I tried this https://discussions.apple.com/thread/6604109 and it doesn't work. I also tried this https://discussions.apple.com/thread/6683283. However the only time safari worked normally was when I booted up in the Safari Only Guest Mode.
MacPro (15-inch, Mid 2012)
Processor: 2.6 GHz Intel Core i7
Memory: 8 GB 1600 MHz DDR3
Storage Capacity: 750 GB

  Delete Safari.plist file.
  Quit all applications. Click on an empty spot on the desktop to activate Finder.
  Hold the “Option” key down and click the "Go" menu in the Finder menu bar.
  Select “Library” from the drop down.
  Library > Preferences >  com.apple.Safari.plist
  Right click it and select  "Move  to Trash".  Close Finder window.
  Please don’t empty the Trash.
  Restart. Launch Safari.
  Test Safari.
  Put back the com.apple.Safari.plist
  If this doesn’t help, right click the Trash icon in the Dock and select “Open”.
  Right click the com.apple.Safari.plist and select “Put Back”.

Similar Messages

  • Safari won't play youtube videos anymore. I've never had trouble in the past. I switched to chrome but then back to safari and changed the default browser to safari. Now safari won't open any sites that require a user and password. Any suggestions?

    Hello everyone,
    I've recently been getting error messages on youtube videos when using safari. This never used to happen. I tried using chrome but it didn't take care of the problem. When I set my default browser back to safari, safari won't open any websites that require a username and password. Any suggestions?

    My case is different from those listed below.  First, I'm running OS X 10.8.5 and Safari 6.0.5.
    My problem is this:
    I run a Google search, say, "youtube somesong", and from the hit list returned from google I
    pick some selection. Youtube launches and plays the video without problems.  However, when
    i click on any of the alternate videos from the page's  vertical list, only the name of the chosen video
    appears beneath the video I just watched.  The new selection itself is not loaded by Safari.
    This occurs for any selection I choose.  My way around this problem is to force a Safari reload of
    the page by using the keyboard shortcut, Command-R.  This fills in the old video window with the
    video I just chose.  Can I conclude that this is a Safari issue alone, or is it a Safari/Youtube combo gotcha?  Anyway, the present condition *****.
    This problem began sometime after i upgraded to Mountain Lion.  I have reset Safari and have also
    deleted the Youtube.com Cache, Cookies, and Local Storage from the Privacy settings under
    System Preferences. I have also tested the problem by running Safari in 32 bit mode (no luck there).
    If anyone out there has experienced this scenario, I sure could use a little help here.

  • Safari won't open any page

    I'm using 7.0.5 Safari on Maveriks
    Safari won't open any page, unlimit loading... ... ...
    Chrome and other browsers - working good, no errors.
    App Store and Updates - work well
    No network issues.
    Safari - clear cache and reset safari - didn't work.
    hosts file is ok
    no extensions
    delete all plug-ins except default ones.
    hm.. what else...
    apple extreme wifi router - work's well.
    Other devices at home has internet on it, other macbook pro doesn't have a problem with safari.
    in console - no errors
    any page won't load in safari, just a white screen and loading progress..
    What should I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Safari won't open.  Message appears:  "Safari won't open any more."

    Safari won't open.  Message appears:  "Safari won't open any more."  Computer is connected to the internet.  Mozilla Firefox works perfectly.

    This can happen if adware is installed without your knowledge.
    1. Use  free  AdwareMedic to remove adware
        http://www.adwaremedic.com/index.php
       Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
       Once done, quit AdwareMedic.
                 or
       Remove the adware manually by following the “HowTo” from Apple.
       http://support.apple.com/en-us/HT203987
    2. Safari > Preferences > Extensions
        Turn those off and relaunch Safari.
        Turn those on one by one and test.

  • Safari won't open any pages since I downloaded McScan Beta V

    I downloaded McScan's Beta version the other day from securemac. Since then, Safari won't open ANY pages at all, giving me the message, "Safari can't connect to server"
    "Safari can’t open the page “http://aol.com/” because it could not connect to the server “aol.com”.
    I dragged McScan to the trash, and still won't work. I also ran through the Safari Preferences, and made sure I had followed their suggestions, "”.Choose Preferences from the Safari menu and click Security. Make sure that the checkboxes to use plug-ins, Java, and JavaScript are selected and that the "Block pop-up windows" checkbox is not selected." Still no luck.
    Any idea how I can get Safari to work again?
    Thanks,
    Tom McDuffie
    [email protected]

    Hi Tom,
    You might want to try posting this in MacScans forum area too:
    http://macscan.securemac.com/macscanforum/index.php

  • Safari is not opening any links from Mail.

    Safari is not opening any links from .Mail.  I am having to copy and paste every one into a browser.  I've tried 'right-clicking' and then open with Safari but that isn't working either.  Any suggestions?

    Hi--thanks for responding.  My default browser was set at Safari 6.0. 

  • Safari update to 5.1.5, on snow leopard, now safari won't open any web page.

    Just installed Safari update to 5.1.5 and now Safari won't load any web page. Running snow leopard on an iMac.  How do I fix, or revert to previous version of Safari that did work, keeping in mind, can't access internet on that computer since Safari won't load a web page (Firefox, Chrome, Opera have never worked on that computer, although Firefox worked fine until I upgraded OS to snow leopard).

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Safari Won't Open Any URL

    I use Safari as my default browser. This morning ALL websites came up: Safari can’t open the page “...” because it could not connect to the server “...”. I emptied the cache, but that didn't help. I also ran Yasu
    I use Endicia postage software which is receiving: "Error -1004 - can’t connect to host" when I try to verify a shipping address, therefore I am unable to print any labels without verification!
    I have opened Firefox and made that my default, but that didn't seem to correct the problem. I also ran Yasu.
    Any suggestion on what I can do?? I'm not sure if these two problems are interconnected or not. If I could switch my Endicia software to Firefox, that would at least temporarily take care of thing for the time being. But of course a perminant solution to the Safari not opening would be best.
    Thanks,
    Barbara

    I'm not exactly sure why it made Safari and my mail program finally connect, but it had to do with this little Earthlink Total-Access window that usually resides on my desktop. Later in that day I went to use it and found it wasn't there. I went to the "Earthlink Total-Access" software in my applications and double clicked on the icon. The little window appeared and my connection worked.
    I guess I had made the assumption that I was already connected through Earthlink DSL, since my Mail and Firefox browser worked. Evidently I wasn't ... duh!
    Hope that helps
    Barbara

  • I'm connected to internet, but safari won't open any pages.

    my ipad show's i'm connected to the internet with full signal, but it won't let me open a website or get email. i've turned the connection on and off, no luck. i've restored the ipdad to original settings, nothing. internet in our house works with computers, iphones, etc. i'm not sure what to try now, i've done everything the help site says too. suggestions?

    Welcome to the Apple Discussions.
    While the iPad shows you are connected to a wireless network, have you entered the email account information?
    Go to Settings > Mail and either pick one of the preloaded email account providers, or enter your own account. Incoming and outgoing account information such as POP or IMAP for incoming, user ids, passwords. You can also check to see the port is set correctly for each.
    With Safari, go to Settings > Safari and turn AutoFill OFF if it is not already. Tap the URL field at the top and enter the URL for your preferred home page.
    See if that helps.

  • Safari won't open any website

    Network diagnostics say that WiFi is good, network settings are good, ISP is good, etc.  And other devices on my network are connecting to the web without issues.  But my macbook air will not connect to any website.

    I get a message that Safari cannot access the webpage because the server is not responding.  However, all my other devices are connecting with no problem.  I just got off the phone with Apple Support and after doing some trouble-shooting and determining that the mba is fine, he asked me to cycle power on the modem and router.  After doing this, the mba connected to the internet with no problem.  I asked him why would the mba need the router to reboot if my other devices are ok?  He said the mba needed to reset its connection.  It's still a mystery to me, but at least now I know what to do.
    BTW, OS is 10.7.4 and Safari is 6.0.
    Thanks for replying.  Maybe my experience will help someone else.

  • Safari won't open ANY RSS pages...

    Hey there. I'm having a problem with Safari 3.1.2 on my iMac. I can't bring up ANY RSS pages. Not the one I have saved as Bookmarks, not ones on websites either.
    All I ever seem to get it this:
    http://img.skitch.com/20080720-nux6fk1tt2188b57ujdxg374rc.jpg
    Is there a plist I can trash or something to get RSS going again?

    Hi Scott,
    Have a read of this:
    http://discussions.apple.com/thread.jspa?messageID=6293801

  • Safari won't open google or gmail

    Hi.
    Safari won't open any site from Google, as YT, GMail...nothing...
    Already clean my cookies, reset the conection.
    Tks

    Hello,
    I have the same problem. My safari won't open google or gmail or anything that is google related.
    Only that  when I try to get into google, I get this message:
    "Safari can't open the page "https://www.gmail.com/intl/en/mail/help/about.html" because safari can't establish a secure connection to the server "www.gmail.com".
    Any solution for this?
    Thank you,
    D

  • Safari won't open word documents

    Recently, Safari won't open any word documents or pdf. Any suggestions? The error message says there are no available programs to open it. Although Pages is installed.
    Thanks!

    Hi..
    Quit Safari.
    Go to   /Library/Internet Plug-Ins
    Move the Adobe PDF Browser plugin (or just PDF browser plugin) to the Trash.
    Relaunch Safari. See if that made a difference.
    Pages can open PDF files as a standalone, but not within Safari.

  • Ios7 bookamrking web application to home screen via Safari crashes after login and when we try to open any link inside. Can anyone please tell me if there is any scheduled fix for this bug in safari?

    ios7 bookmarking web application to home screen via Safari, crashes after login and when we try to open any link inside from the icon that gets created on the home screen. Can anyone please tell me if there is any scheduled fix for this bug in safari?
    From what i understand i see that - Cookies are not transferred between your website and your webapp when installing the icon on the home screen (for authentication purposes for example). It was working until 6.1 and now it’s not working anymore.
    Can someone please tell me if this bug will be fixed in any future release, if so the ticket number of some kind that i can track, or if there is a workaround for this issue?

    ios7 bookmarking web application to home screen via Safari, crashes after login and when we try to open any link inside from the icon that gets created on the home screen. Can anyone please tell me if there is any scheduled fix for this bug in safari?
    From what i understand i see that - Cookies are not transferred between your website and your webapp when installing the icon on the home screen (for authentication purposes for example). It was working until 6.1 and now it’s not working anymore.
    Can someone please tell me if this bug will be fixed in any future release, if so the ticket number of some kind that i can track, or if there is a workaround for this issue?

  • Safari won't open on my Mac (Mavericks v 10.9.2).  I get a message "Safari quit unexpectedly while using the librooksbas.dylib plug-in". Any suggestions?  Thanks.

    Safari won't open on my Macbook (Mavericks v 10.9.2).  I get a message that "Safari quit unexpectedly while using the librooksbas.dylib plug-in". Any suggestions?  Thanks.

    Uninstall Trusteer software.
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x

Maybe you are looking for

  • How do I keep the email address showing when i enter hotmail because every time a different user enters you have to completely log in again

    before everyone's address was always on screen so you could easily log in, now there is only ever one address and I don't know what to do to keep the configuration as it was before

  • Bug in iTunes 9.0 Sound Check ?

    In iTunes 8.x when you add a new song to iTunes (with Sound Check enabled) iTunes adjusts or adds the "normalization information" ID3 tag for the song. iTunes 9.0 doesn't do this anymore. Is this a bug in iTunes 9.0.0.70 ? Ps: Programs like iVolume r

  • I am having trouble printing in duplex on my HP Color LaserJet CP2025 printer.

    I have a problem printing in duplex!  I am using a Dell Studio XPS8100 computer running the 64bit version of Windows 7 with Service Pack 1 installed.  I am connected to the printer thru an AT&T router.  When I print the first few pages then go to fli

  • Java Heap

    Hi I have a webserver with weblogic510/SP6 and JDK1.2.2 running under windows NT. Recently we increased memory from 1GIG to 2GIG. I have tried to change heap size to -ms512M -mx1532M But I am getting error message "out of memory" during Weblogic serv

  • Error on deploying tomcat mgmt plugin

    hi, after deploying the tomcat mgmt plugin to the target host,while i configuring the property page of tomcat it is asking for *1.JMX Port Number* *2.JMX User Name (required when authentication is enabled for JMX)* *3.JMX Password (required when auth