Safari and chrome cant display amazon.co.uk, tfl.gov.uk web pages...

Hi there guys... anyone can help resolve my issue regarding accessing amazon.co.uk , tfl.gov.uk.. Its been a week now that my imac internet connection refuse to load web pages from amazon and tfl using safari and chrome....try to access those website in my macbook pro using the same network...the result is ok...strange???
Pls help....
Thanks in advance

The IP address should be unique between the two computers. The DNS settings should be the same for both. Other things you can check in the network settings: Make sure the Search Domains box is empty. If you click the 'advanced' tab in the network settings and check your DNS settings in here, the DNS Servers box should be populated normally with at least two servers and should match your macbook.
In order to check if you are having a network and/or a name resolution error (you can't find the server www.apple.com). Go to your Macintosh Hard Drive, the Applications folder, the Utilities folder, then launch the application called Network Utility. From the network utility, select the ping menu, then in the box for which network address to ping, enter www.apple.com. You should get a repeated message something along the lines of:
Ping has started…
PING e3191.c.akamaiedge.net (69.192.93.15): 56 data bytes
64 bytes from 69.192.93.15: icmp_seq=0 ttl=52 time=66.232 ms
64 bytes from 69.192.93.15: icmp_seq=1 ttl=52 time=66.461 ms
64 bytes from 69.192.93.15: icmp_seq=2 ttl=52 time=66.547 ms
If you get an error saying cannot resolve host www.apple.com: Unknown host. Then your imac can't resolve the name www.apple.com to it's corresponding ip address. If you get this error, I would then try pinging 69.192.93.15 and see if you can reach that.
If you can ping the number (69.192.93.15) but not www.apple.com, that would indicate that your imac is having problems resolving the name www.apple.com to the ip, which would be a DNS issue. You at this point should make sure your DNS for your imac matches the macbook exactly.
If both the name and address ping properly, then it seems the issue is more isolated to the browser and not your network settings. I would suspect that since you are having problems with both chrome and safari (and probably would with firefox), it is probably a network issue. The above test can narrow it down a little.

Similar Messages

Safari and Chrome will not display some pages right for new user account

Not sure this is a Safari issue actually. Behavior is also in Chrome, but not Firefox. If I need to post elsewhere please advise.
24"imac running 10.5.8. 2gb ram, software update run,
Setup a new user account. Machine will have 2 users.
When I login as the new user, in both Safari and Chrome, some pages - google, ebay, amazon, cnn, yahoo, do not display correctly. Mainly empty space, a few graphics all wrong. They do display correctly in Firefox.
I assumed it was the user. So I added a 3rd user. Same behavior. Tried giving the new user admin rights. Same problem.
For the admin account, everything's fine on those pages, both in Safari and Chrome.
It feels like the new user is not getting access to something it needs, but it also feels like more than a font problem. Thanks for any suggestions. Dan

Thanks for your thoughts. Here's what I've learned. The browsers display correctly for the new user after SafeBoot. I removed all startup items, to no avail. Removed all fonts from the new user account, nothing. Removed all fonts from the admin user's library, nothing. Then I removed all fonts from the HD library, and that fixed it for the new user. Now I just have to figure out which one it was.
So in summary, a bad font in the HD library was affecting Safari and Chrome (but not Firefox) in new user accounts, but not in the admin user's account. Nice. D

Osmf Flash Player will not display images in safari and chrome

In OSMF player, I am using image to display as thumbnail before playing video.
Image is displaying properly in IE and Firefox but I am getting error in safari and chrome.
Error of flash player:
ArgumentError: Invalid parameter passed to method
    at org.osmf.traits::LoadTrait/setBytesLoaded()
    at org.osmf.elements.loaderClasses::LoaderLoadTrait/onContentLoadProgress()
ArgumentError: Invalid parameter passed to method
    at org.osmf.traits::LoadTrait/setBytesLoaded()
    at org.osmf.elements.loaderClasses::LoaderLoadTrait/loadStateChangeStart()
    at org.osmf.traits::LoadTrait/setLoadState()
    at org.osmf.traits::LoadTrait/onLoadStateChange()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at org.osmf.traits::LoaderBase/updateLoadTrait()
    at Function/<anonymous>()
Please help me in resolving this issue. This error occurs with some specific image url's only

<table width="969" border="1">
<tr>
    <td colspan="3"><object id="Portfolio" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="500" height="450">
      <param name="movie" value="Flash/Portfolio.swf" />
      <param name="quality" value="high" />
      <param name="wmode" value="opaque" />
      <param name="swfversion" value="9.0.45.0" />
      
      <param name="expressinstall" value="Scripts/expressInstall.swf" />
      <param name="LOOP" value="false" />
      
      
      <object type="application/x-shockwave-flash" data="Flash/Portfolio.swf" width="500" height="450">
        
        <param name="quality" value="high" />
        <param name="wmode" value="opaque" />
        <param name="swfversion" value="9.0.45.0" />
        <param name="expressinstall" value="Scripts/expressInstall.swf" />
        <param name="LOOP" value="false" />
        
        <div>
          <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
          <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
        </div>
        
      </object>
      
    </object></td>
</tr>

Macbook 2.2ghz Leopard wont auto update (says it cant connect to internet??) also safari and chrome take ages to open and frequently crash. Help!

Here goes...
1) I have a Macbook 2.2ghz (early 2008) running Leopard 10.5.8 which wont auto update (says it cant connect to internet even though it is - error says A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again.) Network diagnostcs says that im connected to the intermet.
2) Also safari and chrome take ages to load pages when every time I open them (around 45 seconds) and then when they are running safari will randomly close and chrome will come up with the aw snap message for random pages (doesnt matter if its trying to loas flash or not).
Iv got Sophos anti virus which is saying theres no malware or viruses, also tried restartiing, re downloading chrome, deleteing my profile from chrome, exporting, deleting and then importing bookmarks and hardwiring the latop to the router. None of these fixed the issues.
Never had these issues and they are really getting on my nerves! Any help would be appreciated.

Thanks but just tried and does nothing, i read somewhere it could be to do with proxy settings? even though though i havnt changed them?? couldnt work out how to do it on a mac, could this be the problem?

HT5648 OS10.6.8 Firefox 24.0 The new Yahoo mail shows no graphics. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Help me, please.

OS10.6.8, Firefox 24.0
The new Yahoo mail shows no graphics using Firefox 24.0 - just identical rectangles where new icons should be.\. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Those settings aren.t easy to access in the most recent Firefox 24.0 version. Help me, please.

The settings for Javascript are either on or off, Fireefox 24 doesn't give you a option to turn off Javascript, unless you installed something like NoScript extension (or some other Javascipt blocking add-on)
If NoScript, then you need to use the View > Toolbars > Customize and drag the NoScript "Temp Allow All" button to the toolbar area to enable all enabled scripts (including Javascript) on that web page.
Under the Firefox Help menu is a option to restart with add-ons disabled to see if something you might have installed is causing your problem.
Reinstall Firefox or create another user account and run Firefox there to try to localize your issue.
I'm having no problem here on 10.6.8 in Firefox, Chrome or Safari, Yahoo Mail works perfectly.

Some images do not display in browser, iPad Air 2. When I load a page with several jpgs (one 1920x720, then 8-10 800x800px), only the first few are shown. Behaviour is similar for Safari and Chrome. Website issue or iPad?

I have just bought an iPad, partly to check that my websites work OK on mobile devices. When I load a page with several jpgs (e.g. one 1920x720, then 8-10 800x800px), only the first few are shown. If I remove the large one, that sometimes fixes the problem. Behaviour is similar for Safari and Chrome. Is this a website issue or iPad?

Sorry, I didn't make myself clear. I'm using a new Wordpress theme that is meant to be responsive. The large image is for a header, than you scroll down to see the rest, one by one. Some one the pages work OK on my iPad, typically the old ones where the maximum image size was 500 x 500. It's the new pages and those I've updated that are causing the problem. On the iPad the large image loads, then a couple of the small ones become visible as I scroll down, but then darkness (rather like my knowledge level).
Being new to IOS and iPads, I'm trying to work out whether I should be looking here, or amongst the Wordpress stuff for a solution.
Here's the website with its new theme: http://www.new-zealand-pictures.com/

Sessions not working in Firefox, Safari and Chrome, but working in iexplore

Hi,
I have been running Tomcat 5.0.18 jdk 1.4. and have just upgraded to Tomcat 6.0.24 jdk 1.6..
I have an app that you need to log on to in a jsp page. When succesfully logged in it redirects to a framed page with 3 pages in it.
All elements of that framed page check for a valid session, if there is one, it displays itself, if not, it redirects back to the log on screen.
This has worked fine for years in all browsers. But since upgrading, in Firefox, Safari and Chrome, when the parent framed page jsp checks for a session, its fine, it passes, but when the other sub-frame pages check for a session, it comes back as a new session, i.e. its not picking up the session that has just been validated and redirects to the login page. Iexplore still works fine. i.e. all 3 pages validate ok.
Any ideas why these browsers are not pickng up the session?

As a test, try putting an empty JSP in front of it that triggers the session to be created, and then redirects (with a HTTP meta refresh for example) to the frameset jsp to see if that fixes anything.
If that fixes it, then I guess the pages load too quickly.

My browsers (safari and chrome) continue to open an old version of a website. Even though I've cleared my browser history and cache. Please help! what else can I do.

My browsers (safari and Chrome) continue to open an old version of a website - even though I've cleared my browser history and cache. It's essential I see the newly launched site - rather than the old ones. It's strange it's happening in both browsers.
Please help!

You, or someone using your computer, hacked the system to redirect certain URL's. The file modified is /etc/hosts.
The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below. Please read this whole message before doing anything.
Back up all data. This is a simple procedure, but if you don't follow the instructions exactly, you could be left with an unbootable system. In that case, you'll have to restore from a backup or reinstall OS X.
If you have more than one user account, you must be logged in as an administrator.
Triple-click anywhere in the line below to select it:
open -a TextEdit /etc/hosts
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
Below that, you'll see some other lines. There should be nothing above the first line "##". If you have any doubt about that, STOP and ask for guidance. Make sure you scroll all the way to the bottom of the document. Scroll bars are hidden by default until you actually start scrolling, so you may not realize that you’re not seeing the whole document.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '11,$d' /etc/hosts
This time, you'll be prompted for your login password, which won't be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Quit Terminal.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

Firefox spacing looks different from Safari and Chrome

The vertical spacing in the title layer is fine relative to the large image in Safari and Chrome but it's crowds the image in Firefox. Can someone tell me how to fix it? I want to retain the swapping feature of the image which is not in a layer.
The site is http://dinghydogs.com

Looks the same to me in FF 15.1 & current Chrome on Windows.
You have quite a few coding errors that should be fixed. Errors can compound display issues in some browsers.
Nancy O.

Length of audio file not correct in Firefox, Safari, and Chrome. Why?

Hello,
I created a mp3 player that loads the file, displays the sound length, and plays the audio file. I have notified that on Firefox, Safari, and Chrome browsers, the length of audio file is not correct. I have uninstalled and installed flash plugin and activex control but no luck. Any ideas why I am experiencing this behavior?
Regards,
Nilang

As a test, try putting an empty JSP in front of it that triggers the session to be created, and then redirects (with a HTTP meta refresh for example) to the frameset jsp to see if that fixes anything.
If that fixes it, then I guess the pages load too quickly.

Need help getting rid of Trovi virus on Safari and Chrome. Cannot use the instructions Apple sent because the copy command under the edit tab does not work.

I use OS X 10.9.5. I have a trovi virus on Safari and Chrome. Yesterday I thought I had gotten rid of Trovi, but it's back on both my search engines. The directions Apple sent yesterday do not work; the copy function under the edit tab is grayed out and non-responsive. Can anyone help me to get rid of this virus? Thanks.

Are you referring to these instructions?
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
If so, be sure to read the instructions carefully, and note that you will need to repeat the numbered steps in the Conduit/Trovi/SearchProtect removal instructions for each line shown, not all together.
If those instructions aren't working for you, for whatever reason, try my Adware Removal Guide. It provides similar instructions, worded differently, as well as an app (AdwareMedic) that can help you do the removal automatically.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Help - Pages have different lengths in Safari (and Chrome) vs Firefox

I have a website created with iWeb '09 that contains some rather long HTML tables that I inserted using HTML snippets. These tables display properly in Safari v 5.0.2 and Chrome (6.0.472.59), but get cut off at the bottom when I use Firefox 3.6.9.
Alternatively, if I force the web page to be long enough to satisfy Firefox, then I have too much dead (i.e., empty) space with Safari and Chrome. See this page: http://coridium.astrapoint.net/c/Coridium-_RiskChecklist.html
Can anyone suggest a fix for this?
Thanks,
-AstraPoint

I had the same problem... I am using phpbb3 table/message-forums on my site, and used an iframe that I found on a youtube instructional video, and it worked fine on safari and chrome, but the forum/table was only like 3 inches long on firefox.
I tried the code in the response above in place of my original iframe code:
<iframe height="XXXpx" allowTransparency="true" frameborder="0" scrolling="no" style="width:XXXpx;border:none" src="URL TO ITEM TO BE EMBEDDED"></iframe>
and I entered the same height/width dimensions from my original iframe and ended up with an even smaller table. So I went back to my original iframe code and made the height 1500px instead of 100% which is below:
<IFRAME SRC = "insertDOMAINhere" WIDTH="100%" HEIGHT="1500px" FRAMEBORDER="0" --if "0" no border, otherwise "1" with border MARGINWIDTH ="0px" MARGINHEIGHT="0px" SCROLLING="auto" --"no" no scrolling bar, "yes" show always, "auto" showed when need > Your browser does not support IFRAME </IFRAME>
I cleared my cache on firefox, and reopened my forum and now it displays the whole table. The page might be too long, but at least it is now firefox compatible. hope it works for everyone else

Mackeeper "pop-up" on Safari and chrome (virus?)

Hi everyone,
I have a problem with my browsers (both safari and chrome). The problem is that there are "pop-ups" on many sites that try to make me download mackeeper.
These "pop-ups" are green hyperlinks on the words of many sites. When I pass my cursor on these pop-ups without cliking, it opens a little window that tell me to download mackeeper.
http://www.noelshack.com/2014-14-1396449780-capture-d-ecran-2014-04-02-a-16-42-3 1.png
http://www.noelshack.com/2014-14-1396449600-capture-d-ecran-2014-04-02-a-16-38-3 7.png
I have never download mackeeper! I don't know where it comes from.
Can someone help me please to totally remove this ugly thing?
Thank you

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=on; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm Daemons; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=on; Ps Firewall; o=`scutil --proxy | grep Prox`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Safari and Chrome shutting down

Safari and Chrome shuttingdown what to do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Safari and chrome have mal wear. How do i get rid of it?

safari and chrome have mal wear. How do i get rid of it?

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Safari and chrome cant display amazon.co.uk, tfl.gov.uk web pages...

Similar Messages

Maybe you are looking for