Safari and Mail not talking to each other Safari says no software found

Hi Everyone,
Okay, when using Safari and trying to email the web content by pressing command + i a message pops up saying the following "Safari couldn't create and email message because it couldn't locate an email application." then it states "You can use the Mail application included with Mac OS X to send webpages. To do so, you need to install Mail using the Mac OS X installation CD's."
Well I have mail it came with Leopard "Hello" I use it every day. Has anybody encountered this problem any help would be highly appreciated. I have cleared the preferences out of the library folder for Safari and Mail and nothing.
Sincerely
Gforce06

Hi V.K.
Thank you I reselected mail and it did the trick.
Sincerely
Gforce06

Similar Messages

  • NetWeaver XI components are not talking to each other

    I am an XI  consultant, i dont have proper Basis support at my client, since they are fond of only ABAP stack.
    They installed netweaver xi from the market place.
    I am unable to import any SWCV (even SAP BASIS) from SLD to IR and IR menu is blank.
    Unable to find list of adapters in Integration Directory.
    RWB -component monitoring is blank .
    SLD- creation of products,SWCV,Technical Sys,Buss Sys is possible.
    In conclusion i can say that they all are not co-operative and not talking to each other
    And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4

    Hi Venkata,
    Does the XI post Installation steps done by the team or not? It seems that there is some steps missing while doing the XI installation. Talk to to the BASIS team and tryu to find out the solution.
    >>> Unable to find list of adapters in Integration Directory.
    Check thisblog for it:
    /people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
    >>> And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4
    In my view, yes. XI is compatible with all the versions of Oracle Database above version 8 but never tried it.
    Reward points if helpful. *
    Regards,
    Subhasha Ranjan

  • I got iPhone4 and safari and mail not working just blank screen appear

    I Got iphone4 after update to 6.1.3 YouTube,safari,and mail not working just appear blank screen wen i try any of thease app anybody can help me thank

    tried
    http://www.apple.com/support/iphone/assistant/phone/#section_1

  • I have a virus that has taken over Safari and will not allow me to use Safari or even shut down my computer.  It claims I need to send $1000 to a "green dot account to get my on line capability.Help

    I have a virus that has taken over Safari and will not allow me to browse of even shut down the computer.  The request is to send $1,000 to a "green dot" address to get the virus removed.
    Help!
    lawrencefromchatham

    Command, option and escape keys held down together will open the "Force Quit" dialog window.
    Quit Safari and then relaunch it while holding down the shift key.

  • Safari and Mail not recognizing IP/network after picking up new WiFi?

    Very strange behavior that has happened numerous times - and I can't figure out what is going on.  The situation is that when I travel to school and connect to the wifi network there, I'm having issues with Mail (5.1) and Safari (5.1.2).  Network CP shows me an IP address and appears all is well - however Safari does nothing (no msg that I'm "not connected to the internet") and Mail just displays the triangle with exclamation point inside ...next to each mailbox.  Interestingly, I can open up Firefox and go on my way.  So why is Firefox able to 'see' the internet (Dropbox and other apps are fine too) yet Mail/Safari is having issues?
    Here's what I've done:
    Quitting/re-opening Safari:  Safari icon bounces in dock for a minute, literally, and never opens.  Now I go to try to open it again and it doesn't even try to open - no bounce, nothing (it's actually in "not responding" mode according to the force quit box).  So I force quit, re-open and it goes right back to that same behavior - not responding.  Have to restart to get it to act normally again.
    Mail won't even quit. I have to force quit - every time that this happens.
    Anyways, I can't tell if this is MB Air specific behavior, given its wifi troubles (which I have continuously whether at home or school) - or if this is purely an OS/software issue.....or a combination? 
    Anything else I can do to help troubleshoot, let me know.  Thanks in advance.

    Very strange behavior that has happened numerous times - and I can't figure out what is going on.  The situation is that when I travel to school and connect to the wifi network there, I'm having issues with Mail (5.1) and Safari (5.1.2).  Network CP shows me an IP address and appears all is well - however Safari does nothing (no msg that I'm "not connected to the internet") and Mail just displays the triangle with exclamation point inside ...next to each mailbox.  Interestingly, I can open up Firefox and go on my way.  So why is Firefox able to 'see' the internet (Dropbox and other apps are fine too) yet Mail/Safari is having issues?
    Here's what I've done:
    Quitting/re-opening Safari:  Safari icon bounces in dock for a minute, literally, and never opens.  Now I go to try to open it again and it doesn't even try to open - no bounce, nothing (it's actually in "not responding" mode according to the force quit box).  So I force quit, re-open and it goes right back to that same behavior - not responding.  Have to restart to get it to act normally again.
    Mail won't even quit. I have to force quit - every time that this happens.
    Anyways, I can't tell if this is MB Air specific behavior, given its wifi troubles (which I have continuously whether at home or school) - or if this is purely an OS/software issue.....or a combination? 
    Anything else I can do to help troubleshoot, let me know.  Thanks in advance.

  • TS1398 Safari and mail not connecting on ipad mini

    Suddenly, at home or work, my ipad mini is acting up:
    - It connects to Wifi ok or using Verizon cellular data
    - But neither Safari or Mail can access the internet.
    - Yet Square, (which requires an internet connection) works fine
    - Also, all  my coontacts are gone...
    I have tried all the suggested ideas to reboot, disconnec, reset Wifi etc... (which is not the answer as when I am on cellular network I have the same problems.)
    All was workin gfine for months before...
    Any ideas??

    I was at work and could not try all your suggestions.
    Now that I am done, I turned on my ipad, and all is back to normal???  After being totally messed  up since last night.
    But I do think that Lizdance idea about the icloud and password might be the answer.  Somehow apple straightened it out...???
    Thanks for helping out!  What an amazing thing this internet is!! 

  • Safari and Mail not working, and now software update not running!

    Hello, can anyone can help?
    I was running 10.3.9, no problems, with safari, mail etc, through my standard third party router. Then today safari won't open up, just goes into spinning ball. Mail won't even open. I have re-installed the system from original discs back to 10.3.3, but still no luck. I can't even run software demag from a download of the apple site, whirling ball again.
    Do I need to go for full system default re-instal, as I will loose all my mail folders and safari settings?
    Pretty stuck at the moment......

    Sounds like a problem with your internet service provider. Perhaps contact them and see if they are experiencing problems. The other thought is the modem and next is the router.

  • They Are Not Talking To Each Other

    I just bought a new iMac. With the old iMac, every time that iTunes was launched, the computer would sync with Apple TV. This computer does not sync with the launching of iTunes. I found this out when I rented a movie last night and tried to watch it. It was there on the iMac but it did not show up on Apple TV. It was only then that I realized that the syncing was no longer happening. How can I get it to sync again?
    Cheers
    John

    Let me just backtrack a bit here.
    So I'm sitting on my sofa in front of the TV set and I fire up Apple TV.
    From the Menu I choose
    Settings
    Computer
    Add Shared iTunes Library
    Connect to iTunes Window comes up with the following message
    to stream iTunes content to your AppleTV, open iTunes and select AppleTV from the Devices list. You will need to enter this passcode
    and then you're given a 5 digit code to enter. At this point I rush upstairs where my iMac is, open iTunes and yes, there is the Apple TV in the Devices list but there is nowhere that I can see for me to enter the 5 digit code. Ideally I should be seeing the AppleTV icon with the Click to Set up" next to it in the list as in these instructions
    but all I see is a plain Apple TV icon so I am stymied. Maybe you should be renting movies via AppleTV and not on the iMac although I would have thought that with all the interconnectivity, a rental on any device can be viewed on any other.

  • Printer and Touch Smart do not talk to each other

    I have a HP Touch Smart and Cannon MP810 and the wireless function will not work between them I have a belkin and the Cannon dongle but neither will work.

    Sorry it is a bluetooth not a wireless

  • N and G networks not "talking" to each other

    Hi Everyone,
    I have an Airport Extreme (802.11n) which is connected to our cable modem. Following an article in Macworld, I set up two networks, one for our "N" machines (a new iMac and a Macbook) and a "G" network for our older laptops (a PBG4 and a G4 iBook). The "G" network begins with an AEX which is connected to the Extreme via an ethernet cable. The "N" network is 5ghz and all works well except for one thing. I recently converted the "G" network to WDS; both the AEX base station and the WDS AEX relay have speakers attached to them, and the remote AEX (the last in the chain) is connected to our printer. Before I changed the AEXs to WDS, the "N" machines could both print and play to the connected speakers in the "G" network, but since I switched the "G" network to WDS, the "N" machines can't do so. (The AEXs don't show up in Airport Utility or iTunes on the "N" machines.) The only way we can print or play music from the "N" machines is to switch to the "G" network. I must have missed something when I set up the "G" WDS network. I'd like to make it so the "N" machines can stay on the "N" network but can access the functions on the "G" network. Thanks in advance.
    Joe

    In this network configuration, the key is to make sure that the AirPort Express Base Station (AX), that is acting as the main base station in the WDS, is configured as a bridge. (Connection Sharing = Off (Bridge Mode))

  • Safari and Mail not communicating.

    I am using Safari 7.0.5 and Mavericks 10.9.4, and recently, when I click on a link in Mail, Safari opens, but there is no window open. If I open Safari normally, I do get a window, so the problem seems to be related to some kind of problem between mail and Safari. This has made it impossible to follow any links in mail. I did try setting Firefox as my default browser, and I do not have the same problem. Any ideas as to what may have caused this?

    You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Windows Vista & Palm Centro 690 not talking to each other

    After my other phone went through the wash machine I changed to a this Palm unit.  Activated it, came home and installed the sync software, worked fine.  Couple of days later tried to sync again, no such luck.  I have been working off and on for a couple of weeks trying to get it to work again!!!  I have talked to the local Verizon office, they suggested I talk to tech support.  Called them, spent over an hour on the phone with them uninstalling the software, again, download the new software, again, still nothing, did a reset and a format and again nothing.  Have been using the Palm as a regular phone and it is fine.  I have been unable to figure out what to do.  I even talked to Hp tech support, not their problem!!! talk to the palm people.  So here I am, I have looked through your forms but was unable to locate anything that is related to the Centro and Vista.  I am almost willing to try anything that seems reasonable.
    Post relates to: Centro (Verizon)
    This question was solved.
    View Solution.

    From the bottom up.
    Palmdestop 6.2, on a 32bit HP Pavillion a1740n, When I plug the usb cable into the phone I hear a "dull thud" like and error, then it just repeats it self. I was able to find this information the other evening:
    Problem Event Name: - PnP Driver Not Found
    Architecture: - x86
    Hardware ID: - USB\VID_0830&PID_0061&REV_0200
    OS Version: - 6.0.6001.2.10.768.3
    Locale ID: - 1033
    Hopefully this means something to you, as it doesn't to me.  Additionally last night I was trying to install new drivers through device manager from the CD, but the machine reported that what I have is current, as well as the dialogue boxes go by so fast that it is next to impossible to do anything, such as change the path.
    Thanks, for your response and I hope you come up with a solution.
    KZ
    Post relates to: Centro (Verizon)

  • Can Time Capsule and BT Homehub talk to each other wirelessly??

    Dear All!
    I have a 500GB Dual Band Time Capsule however I have a problem....
    I live in a house where the BT hub is located downstairs (main telephone socket). Because I share the house with friends, for safety, my printer and TC are upstairs in my bedroom. I am therefore trying to get my TC to extend the BT Hub in order for me to be able to browse the net as well as access TC and let Time Machine do its thing.
    I've tried to do it but have failed miserably! Can anyone out there help me pleeeasssseeee?
    Thanks!

    Guys, and in particular Duane, thank you for all the posts back to my question!
    I am using the standard white BT home hub (not the latest version), which as you've confirmed can not be extended. My main problem is that for safety reasons I don't want to put my TC next to the hub, however, could I solve my problem by buying an AX, plugging this in next to the router, connect it to the home hub via ethernet and then extend that wireless network to my TC in my room?? (It would actually be cool to connect to my speakers wirelessly - surely the TC should have come with an audio socket like the AX!?!?)
    Anyway this option seems excessive (and not exactly cheap) but maybe the only way forward...?? Unless I get as lucky as finding a needle in a haystack and find a router than TC can extend!
    Really appreciate the help from all - thanks!

  • Have Mac OS 7, 8, 9, and 10.4 talk to each other, is it possible?

    If so can I have some hints (mainly with 10.4)?
    Models that I have networked:
    Power Macintosh 7500/100 (Mac OS 8.0)
    Power Macintosh 8600/300 (Mac OS 8.0)
    Power Macintosh G4 (Mac OS 9.2.2 and 10.4.11)
    Powerbook 520 (Mac OS 7.?.5)
    If needed I can upgrade the Power Macintoshes to Mac OS 9 (Gotta Find the CD).
    Thanks,
    George W.
    www.apple-commercials.co.cc

    You have always been able to Bridge from AppleTalk-over-Ethernet to AppleTalk/LocalTalk (e.g., PhoneNet wiring) using one of the solutions below. They were introduced as Printer Bridges, but they can Bridge up to 8 devices including File Sharing Macs (but cannot get those Macs on the Internet):
    1) Farallon EtherMac iPrint LT
    2) Asante AsanteTalk
    3) Apple Bridge software, running in the background on a Mac with both Ethernet and LocalTalk ports
    All this stuff inter-operates pretty much as Gil has said until you get to 10.4. At 10.4, Apple eliminated support for File Sharing using Appletalk \[AppleTalk/LocalTalk was already dead in Mac OS X, but they eliminated AppleTalk-over-Ethernet as well.]
    OS 9 supports File Sharing using both AppleTalk-over-Ethernet and TCP/IP \[TCP/IP is also over Ethernet, but cannot be converted to AppleTalk/LocalTalk]. OS 9 does this trick by including a bit of software called ShareWay IP. This package appear to have been written by, and is now available from a third party, Open Door Systems, at a modest price (US$39), and can be retrofit into OS 8 and some OS 7 systems:
    http://www.opendoor.com/shareway/
    PS: This illustrated article explains connecting OS 9 and Mac OS X:
    http://homepage.mac.com/car1son/os9xnet_nfilesharing.html
    In general, you will have better luck attempting to connect from the Older Mac to the Newer Mac.
    Message was edited by: Grant Bennet-Alder

  • Safari and mail not responding

    - when I try to open an internet site I get the message "this page could not be opened because the server has stopped responding". I cant update email either. It has worked fine until this afternoon.

    tried that with no sucess. I have also reset the network connections then reconected using my wi fi modem.
    I am looking through the settings to see what else it could be?

Maybe you are looking for

  • How to give input to 3d surface interms of cylindrical coordinates(r,theta,z)

    hi,please let me know how to give input to 3d surface interms of cylindrical coordinates(r,theta,z)how to give input to 3d surface interms of cylindrical coordinates(r,theta,z)

  • % of Total, no hierarchy

    I'm trying to create a calculated measure showing % of Total Net Sales, something like Rank or TopCount but showing % Value. I tried "parent"  but since I do not have hierarchy in the dimension , it gave 100% for every dim value. a - how to do it for

  • Skype are trying to hide and stop us talking about...

    I see they closed our last thread so we can not further share nre information about the "PRISM SITTUATION" NOT AT ALL HAPPY http://community.skype.com/t5/Security-Privacy-Trust-and/Skype-quot-s-Voluntary-Participation-in-PRI...

  • Managed Server Port

    I need the Managed Server Port. I click Environment-> Servers, and get 3 servers. They are AdminServer (admin), bam_server1, soa_server1. Which is the Managed Server?

  • Could not startup database because of controlfile

    Hi, all I have an oracle 10.1.0.2 running on Redhat Linux E3. I tried these steps to startup the database but failed. [oracle@flulinux01 bdump]$ export $ORACLE_SID=+ASM [oracle@flulinux01 bdump]$ sqlplus "/as sysdba" SQL*Plus: Release 10.1.0.2.0 - Pr