Safari and secure connection issues

Today I started receiving errors when I try to log-in to secure web sites such as e-mail or password protected sites like "My eBay". Before I can get to the log-in page I get a drop down screen reading
Safari can’t open the page “https://login.yahoo.com/config/login_verify2?.partner=sbc&.done=http%3a//sbc.yah oo.com/” because it couldn’t establish a secure connection to the server “login.yahoo.com”.
It has now spread to iTunes and I cannot purchase songs.
I have run keychain first aid in the Access keychain program.
I downloaded the latest security update a couple of days ago. Wondering if it screwed up anything. anybody got any ideas?

hey there pease check the article below
http://docs.info.apple.com/article.html?artnum=106211
basically it tells you to check date and time

Similar Messages

  • Safari and secure connections

    Hi all
    My MacBook has quite literally in the last few minutes developed an issue which I thought was long dead. It won't connect to secure sites. I couldn't even post this message using Safari as I couldn't log in!
    Has anyone had this on Tiger? Fixed it? Really could do without this problem!

    Well guys
    After rebooting 4 times but making no changes of any kind... it's now accessing secure sites, although very slowly. At the moment this computer appears to be going through some kind of episode, simple things aren't working properly or going very slowly.
    For example, Apple+w to close a windows on everything... bar a finder window lol
    I'm beginning to think the unthinkable... a reinstall of OS X! Behaviour appears to be more erratic over the last few hours after I ran a software update and installed a fair bit updates as it hasn't been updated in a while.
    Oh well.

  • G4 ibook complete failure after installing leopard and safari and security

    Bought Leopard. installed in my g4 ibook. no problem, downloaded 10.5.2, safari and security updates. computer refuses to chime on, seems to come on, no video screen. seems to be running but no image to work with. HELP~!

    Apple repair center diagnosis: not enough ram, maxed out storage.....not enough room to open. I purchased additional ram, $90, and will move several gig of hard disc storage into an external hard drive. The tech guys at the University of Arkansas computer store, rock!

  • Updated Safari and Security 2008.. Operating system won't start.

    HELP! I downloaded Safari and Security 2008 updates July 1st 2008 and it froze the system. I left it for 24 hours, now I reset and all I got is a white screen, folder with a question mark in it. I tried booting from the install discs but it won't do it. I also tried to verify/restore permissions and I ran first aid/repair disc but it says there are errors. It says "invalid node structure volume check failed" "error the underlying task reported failure on exit". "1HFS volume checked" "1 volume could not be repaired because of an error". No kidding, Apple destroyed my OS!
    Help?

    Hello Utahmedic and Welcome to Apple Discussions ...
    Usually a folder with a question mark indicates your Mac doesn't know which disk to boot from. When you say you booted from your install disks, can you please tell us exactly what you did? In order to boot from a restore disk you have to first, shut down your Mac. Now, hold down the C key, insert the restore disk and press the Power Button all at the same time. Hopefully you'll see the Apple logo on the Desktop, this can take a few minutes depending on the size of the drive. This will boot from the restore disk. An Installer window will open. Ignore that and instead go to Utilities/Startup Manager in the Menu. When that window opens select MacintoshHD 10.4.x in the panel on the left. Then click Restart...
    I'm hoping you could do this. You have to run Disk Utility from your restore disk not the Disk Utility app that resides on the hard drive in the Application/ Utility folder.
    If Disk Utility can't fix the errors on the volume you might consider purchasing DiskWarrior from www.alsoft.com. It does a great job of repairing disk errors.
    Also, while you have Disk Utility launched with MacintoshHD selected in the panel on the left, look down on the right side of the window where it says:
    Capacity and Availability. Make sure you have a minimum of 15% free disk space at all times... more if possible.
    Carolyn

  • IMac and internet connection issue

    Dear Forum members,
    I have a number of iMac's. However on one of them when a try and connect to a certain site, I get "Safari can't connect to server" message. It also says safari can't open the page "http://www.somewebsite.com/" because Safari can't connect to the server "www.somewebsite.com".
    Please note www.somewebsite.com is just a made up name.
    When I googled around it seems to indicate a firewall is blocking this URL. So I did the following:
    Make sure OSX firewall is turned off - it always was.
    Tried to flush the cache by typing dscacheutil -flushcache but to no avail.
    Tried accessing using Firefox - same result
    Any suggestions on how I can fix this issue.
    I am running OSX Version 10.7.2, Safari 5.1.2
    Thanks
    Max

    Everyone I found the answer after I posted my own comment re localhost...got me thinking.
    I checked /etc/hosts file and in there was a loopback to localhost
    127.0.0.1     somewebsite.com
    WOW...how the heck did that get entered as I never edited this file??
    Now all works fine.
    Thanks everyone for your assistance.
    Here is a link to where I originally found the clue

  • UPD, Black Screen, and Securing connection

    Hello All,
    I have configured a Server 2012 R2 RDS setup. I have the RDCB's in HA and have allowed access to the collection (Pooled Desktop) via the RDWA server. All of the connections come from Windows 8.1 to windows 8.1 stations in the pool. UPD's are configured and
    hosted on a share on a secondary server. Most of the time everything works correctly; however, when I do have issues it is one of the following 3.
    1. The user logs in and gets a temporary profile. The cause is that the UPD is locked from the last log on. There is no way to remove the lock without restarting the UPD server; however, this causes every now log on to get a temp profile until the server
    is back on line.
    2. The user logs into the system and instead of the desktop are presented with a black screen and a mouse pointer. I found a reference to this being linked to the loading of the UPD as well but I have not been able to prove this yet. (http://jjstellato.blogspot.ca/2014/06/are-you-thinking-of-using-user-profile.html)
    3. The last issue is when a user clicks the collection icon on the RDWA page it starts to load the rdp connection and it gets stuck at securing connection. It will just sit a securing connection forever. I am using a wildcard certificate for this setup that
    we have purchased. 
    All of these issue are intermittent and usually hard to reproduce on a consistent basis, so if anyone has any ideas on any of these please let me know.
    Thanks,
    Scott 

    Hi Scott,
    For temporary profile issue you can delete the registry key once and then check the result as per bow article.
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    ProfileImagePath: Find specified user name and delete it and restart to verify the result.
    RDS 2012: Profile Disks and Temp Profiles
    As you have purchase wildcard certificate, but please check that the certificate is placed under local computer/Personal store folder and also place under “Trusted root certificate” check the box “Allow the Certificate to be added to the Trusted Root Certification
    Authorities store on the destination computers. Please go through this article for certificate related case.
    - Configuring RDS 2012 Certificates and SSO
    - Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Mountain Lion wifi WEP security connection issues

    After installing Mountain Lion I experienced connection issues with my linksys router when waking from sleep. After trying numerous recommended fixes that would only work for a short period of time I have come across a fix that resolved all issues.
    1. Login to your router and changed from WEP to WAP security settings.
    2. In network preferences>advanced; delete the previous WEP network from your preferred networks.
    3. Open Keychain Access (spotlight search) and delete the Airport network password from both login and system.
    4. Search for new wifi networks and select the new WAP connection to your router.
    This has completely resolved my issue and forced my lazy self to upgrade from the outdated WEP secutiry protocol to WAP.
    Hope this helps anybody experiencing this issue.

    I think you mean WPA, i.e. WPA2 (personal) for best security, compatibility and performance (or is Linksys different?)
    http://support.apple.com/kb/HT4199?viewlocale=en_US

  • WAP2000 and iPhone connectivity issues?

    I have several WAP2000 (Firmware 2.0.0.5), and while they work fine for PC's, iPhones, iPod touches cannot connect to them.
    Well, they connect briefly, get an IP address from the router, and immediately drop the connection to re-connect again.
    I have tried changing channels, eliminating all but one of the AP's, and so forth.
    Has anyone else had issues with this firmware?  I see posts where people are saying their iPhones connect up fine.  This happens on versions 3.x and 4.x of the iphone O.S.  It's not limited to one iphone or ipod touch; we've tried several.
    If anyone else is running 2.0.0.5 of the firmware and they are having success with an iphone, can you please tell me your settings?
    Thanks in advance!
    --Greg

    Greg,
    I think I have the same problem but with a Blackberry Storm 2.  (I posted in the last two days--Look for WAP2000 and Storm 2)  I see the Storm 2 connect successfully to the WAP2000 but then never establish a connection to the Blackberry Enterprise Server (BES)...Necessary to do anything useful with a Blackberry device.  A few months aga (Before I had my Storm 2) I had borrowed an iPhone for a week.  During that time I tried to use my WiFi but it never seemed to work (ie Established a WiFi link but then couldn't do anything else with it.).  Since I didn't have it long and WiFi wasn't the object of my testing I ignored the problem.  Now troubleshooting my Storm 2 problem and realizing that other WiFi devices on my network have been experiencing issues (the Storm 2 appears to have been most impacted) it is very likely that the iPhone I borrowed was experiencing the same problem.
    You can read my previous post but a quick summary--> When I used a packet analyzer (Wireshark) I saw that my router was issuing ARP address discovery broadcasts to the Storm 2's IP address but the Storm 2 was not responding.  I had tested the same setup with a different wireless access point (Linksys WAP54G) and saw the Storm 2 properly respond (and the Storm 2 worked perfectly when connected to the WAP54G).  I concluded that the WAP2000 was either not forwarding the ARP broadcast to the Storm 2 or it was not forwarding the Storm 2's response back to the LAN.
    I created a work around the now allows my Storm 2 (and multiple other devices) to function successfully on the network.  I have a Cisco ASA5505 firewall that has a ststic ARP table and is capable or proxy-arp (ie.  It can respond to ARP requests on behalf of devices on the network).  I simply created an entry for my Storm 2 and now it functions properly.  I also had a laptop and an IP security camera that had intermittent connectivity issues.  When I added static ARP entries for these items their problems disappeared as well.
    I don't think this is a settings issues so I am hoping Cisco confirms this as a bug and issues a firmware update.
    I hope this helps.
    --Gerhard Wittreich

  • I'm getting 'an ssl error has occurred and secure connection can not be made' I have upgraded to the latest OX version, but no joy in downloading a wetransfer file

    I have received a retransfer file and if I try to open it I get the error message detailed above.

    Have used it before with no problems.
    Times have changed.
    Older versions of SSL has been found to have some problems that have been patched (several different times) with Apple Security Updates. Unless wetransfer has kept up and patched these vulnerabilities, you may not be able to establish a secure connection with them (due to their software being out-if-date).

  • Database link and remote connection issues..

    We have a sql script... Large script that we would rather not post here. The script connects through a dblink to a remote site at the beginning and gets thousands of records. We then process these records locally which takes around 40 minutes. The link is unused for that time. Then the same script attempts to connect again through the dblink and set a confiirmation flag. But this final confirmation step routinely fails. The script used to work fine when the confirmation was at the beginning of the script.
    My understanding is that when you go out through a dblink it creates a session on the remote computer. The session stays active until the local proc ends or the session times out. Successive calls through the dblink from the same proc will reuse the same remote session? Is this true?
    So, Is the inactivity period possibly causing this dblink connectivity issue? We put some test sql select statements in the script here and there selecting from dual at the remote site to test the link inbetween major proc calls. Sometimes even these fail. What do I have to do to keep this link active? Is this even my issue?
    Like I said this script worked fine when the confirmation piece was at the beginning right before we start downloading files and basically no inactivity period... Now we download files and confirm at the end with a 40min to 2 hour inactivity between.
    The remote site as well as the network claim that they are not dropping us... The only piece of information I can provide is that on our side SQLNET.EXPIRE_TIME = 10 and on there side SQLNET.EXPIRE_TIME = 0. I've read that others solved this issue by manipulating this value.
    Here are some of the errror message we get in our script...
    ORA-03114: not connected to ORACLE
    ERROR at line 1:
    ORA-02068: following severe error from DMVAIS
    ORA-03135: connection lost contact
    Edited by: Mark Reichman on Nov 25, 2008 12:47 PM
    Edited by: Mark Reichman on Nov 25, 2008 12:57 PM

    What version of Oracle?
    What are the values of the following database parameters?
    open_links                       max # open links per session
    open_links_per_instance    # open links per instanceAny chance you are exhausting one or both these parameter values?
    Have you ran a check on the network connection between the two machines?
    HTH -- Mark D Powell --

  • Oracle.ldap.util and secure connections

    Greetings,
    I am connecting to our corporate LDAP (Sun One) server to retrieve Users so as to produce lists of names, etc. In development, the connection was not secure, however in production it is. I need some advice on what the method to use would be for handling the secure connection.
    It looks like I am unable to get the RootOracleContext object from which to getSubscriber(). Please help!
    And happy holidays!
    Thanks, Ginni

    Bump

  • RFC, IDOC and secure connection

    Hello
    Does RFC/IDOC support secure connection like HTTPS?
    How the data can be encrypted?

    Hi,
    As Moorthy  Quoted  RFC will help you,
    This will be help you for encrypying the data.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2cce390-0201-0010-5a9f-cca08c75b6ea
    /people/kathirvel.balakrishnan2/blog/2006/06/13/sap-php-together-a-simple-base64-encoding-and-decoding
    Encrypting data
    Regards
    Agasthuri Doss

  • JEditorPane and Secure Connection failed

    Hello,
    I have created a simple application that shows the resulting HTML page from a URL connection using JEditorPane. This works fine except when I try to connect to a URL that needs a user name and password.
    Using a straing URL connection I am able to connect but when I try to use the JEditorPane there is no method, as far as I know to get the connection and pass it to the EditorPane to use. I have tried the following :
    context is with in a class that Extends the JEditorPane:
    setContentType("text/html");
    InputStream is = getSecureInputStream(username,password,tmpStr); // returns an input stream from
    // a URL connection
    HTMLDocument doc = (HTMLDocument)getDocument();
    this.read(is,doc); // try to get the JEditorPane to
    // read from the input stream
    I get the following error:
    error:Must insert new content into body element-
    java.lang.RuntimeException: Must insert new content into body element-
    at javax.swing.text.html.HTMLDocument$HTMLReader.generateEndsSpecsForMidInsert(HTMLDocument.java:1878)
    at javax.swing.text.html.HTMLDocument$HTMLReader.<init>(HTMLDocument.java:1854)
    at javax.swing.text.html.HTMLDocument$HTMLReader.<init>(HTMLDocument.java:1729)
    at javax.swing.text.html.HTMLDocument$HTMLReader.<init>(HTMLDocument.java:1724)
    at javax.swing.text.html.HTMLDocument.getReader(HTMLDocument.java:125)
    at javax.swing.text.html.HTMLEditorKit.read(HTMLEditorKit.java:228)
    at javax.swing.JEditorPane.read(JEditorPane.java:504)
    at javax.swing.JEditorPane.read(JEditorPane.java:478)
    at com.UrlChecker.EditorPane._$10273(EditorPane.java:98)
    Thank you

    i can't find how to fix in the See Secure Connection Failed page, that's why i post my question.someone helps me pls!!!

  • Download and iTunes connection issues

    As of recently, I have purchased numerous audio and video files from the iTunes store with no difficulty or connection issues of any kind. Though today, I attempted to download the Iron Maiden: Flight 666 movie, and had issues with my download. Though the file is downloading, it is taking an excruciatingly long amount of time. A 3.09 Gigabyte file, a file which might have previously taken me about an hour to download on my connection, now displays an estimated download time of 17+ hours. It has been downloading now for at least an hour, and only 9.5 Megabytes have been successfully downloaded. Now, I am experiencing difficulty accessing the iTunes store at all. An error message continually pops up saying that my connection has been lost and the download pauses, though I have checked my connection time and time again. I have even contacted my internet provider, Comcast, in hopes of solving my problem. My connection is good, though iTunes itself is the only thing giving me difficulty. I have gone through all of the steps that Apple has recommended, and have not had any success in attempting to download the file. Any help would be greatly appreciated.

    Contact iTunes support.

  • BT Infinity and https connection issues

    I have sporadic issues with https connections on my BT Infinity service.
    I used to be on Virgin ADSL and had no issues.
    I can also use a Orange mobile dongle with no issues if I switch to that when experiencing problems with BT.
    Some example sites:
    Dixons checkout pages
    NatWest banking pages
    Anyone else experience this?
    Should I periodically reboot the HomeHub and VDSL?
    Cheers,
    Jason.

    Can someone on Infinity kindly do me a test and visit https://upgrades.o2.co.uk/index.htm and tell me if it's darn slow for you too?  It's not the site as I'm loading up VNC and connecting to a VPS in America and it's instantly loading. It'll definitely rule out traffic shaping if someone on Infinity can tell me either way.
    Thanks you generous souls!!!

Maybe you are looking for