Safari Begins to Open, Pinwheels and Freezes While Loading Homepage

I just recently have been having problems with Safari on my Powerbook G4! Everytime I clicked on Safari it would bounce a couple times and the browser window would open but then it freezes. It just sits there and pinwheels trying to load the homepage.
I have uninstalled Safari and tried to download a new version and then when i try and install the program the installer opens and the same thing happens. The installer bounces, the window pops up but it's blank and the pinwheel starts again.
After uninstalling Safari i have recently installed Firefox and that works fine. The same problem has just happened with my Limewire so I'm unsure if it's just the Safari application it may be something else.
Does anyone know a fix to this problem? If you could help that would be great. Thanks
Powerbook G4    

I'd say the bad blocks were behind the problems you were seeing. Their existence points to either a defective HD, or directory corruption. The latter usually can be repaired by using a Utility such as Disk Warrior, or as you did, reformatting the drive.
Best approach to minimizing directory problems is to do routine maintenance twice a month. Have a look at this MacWorld article for suggestions.
For routine maintenance I use OnyX. There is no charge for the software, but I believe the developer asks for a donation.
It's very easy to use. I run it twice a month. Once it is installed, you would double click on the OnyX icon in your application folder (or drag an icon to your dock for quick access) to open the application. After entering your administrator password, you would select "automation". The panel looks like this:
Select the same items I have checked. The program takes about 5 to 10 minutes to run. Leave your computer alone, that is, don't use it for anything else until OnyX is finished. Once complete, restart the computer and you're good to go.
Lastly, the most effective maintenance is having a full backup of your system on an external hard drive. All machines fail eventually, despite the best maintenance. If you had a hard drive failure without any backup, then you would lose all your information, including documents, images, songs, etc. Not a pretty picture.
For your system, you would purchase either a USB or Firewire Drive for your new Intel Machine. The key here is creating a "clone" backup on the drive, which you back up regularly, or at least once a week. For the backup process I use SuperDuper. Very easy to use. The initial backup takes about 1 to 2 hours. Subsequent backups take 5 to 10 minutes. Total $$$ investment can be anywhere between $100 - $250 depending on the size of your Hard Drive.
Post back if you need any other information relative to your questions here.

Similar Messages

  • Safari pinwheels and freezes the entire system.

    Safari pinwheels and freezes the entire system.
    I've read numerous threads with this Safari pinwheeling theme, but none of the posted solutions I've found work for me.
    The problem:
    Safari will almost always on opening, and frequently when filling in forms on websites, start pinwheeling. The whole system then slows down, and then eventually freezes. Even the dock bar freezes. When this happens, I can't even bring up the Force Quit bar. The freezing will often last several minutes, then all of a sudden, all my various previously ignored mouse and key clicks cycle through. When Force Quit finally starts, then everything freezes again. Eventually, Force Quit will show Safari as not responding, and once in a while the system then will start responding, but usually I have to kill Safari.
    The problem subsided a little bit on the opening the application problem when I switched my start page from Apple.com to Google.com, thinking that maybe it was just too much graphics crap coming in on the Apple site.
    The problem happens on both my Airport and cell modem network connections.
    I may have seen this behavior once with Firefox, but haven't been able to reproduce it.
    Generally I only have a few things running: Excel, Messenger, Safari.
    Things I've tried to fix this:
    Reset Safari
    Clear Safari Cache
    Delete Safari folder in the system cache folder
    Went into the Energy Saver in Preferences and unchecked, "put disk to sleep when not in use" for both the battery and power adpater settings
    Limit number of tabs open
    I'd try restarting Safari occasionally, but the problem usually happens on opening.
    I've emptied the trash, and made sure there is ample open disk space (10gb right now).
    Resolved duplicate fonts.
    I have no third party apps to affect Safari or networking.
    I've reset the machine by unplugging it and holding the power button.
    My computer is a MacBookPro 15" with all the latest software and firmware updates and 2gb RAM. This has become so frustrating, it's been very tempting to just throw the laptop at the wall and go back to my Windows laptop...

    I'd say the bad blocks were behind the problems you were seeing. Their existence points to either a defective HD, or directory corruption. The latter usually can be repaired by using a Utility such as Disk Warrior, or as you did, reformatting the drive.
    Best approach to minimizing directory problems is to do routine maintenance twice a month. Have a look at this MacWorld article for suggestions.
    For routine maintenance I use OnyX. There is no charge for the software, but I believe the developer asks for a donation.
    It's very easy to use. I run it twice a month. Once it is installed, you would double click on the OnyX icon in your application folder (or drag an icon to your dock for quick access) to open the application. After entering your administrator password, you would select "automation". The panel looks like this:
    Select the same items I have checked. The program takes about 5 to 10 minutes to run. Leave your computer alone, that is, don't use it for anything else until OnyX is finished. Once complete, restart the computer and you're good to go.
    Lastly, the most effective maintenance is having a full backup of your system on an external hard drive. All machines fail eventually, despite the best maintenance. If you had a hard drive failure without any backup, then you would lose all your information, including documents, images, songs, etc. Not a pretty picture.
    For your system, you would purchase either a USB or Firewire Drive for your new Intel Machine. The key here is creating a "clone" backup on the drive, which you back up regularly, or at least once a week. For the backup process I use SuperDuper. Very easy to use. The initial backup takes about 1 to 2 hours. Subsequent backups take 5 to 10 minutes. Total $$$ investment can be anywhere between $100 - $250 depending on the size of your Hard Drive.
    Post back if you need any other information relative to your questions here.

  • Safari freezes while loading

    I am running Safari 4.03 on a G4 Mac with os x 10.4.11.
    About once a day, Safari will freeze while loading a page. The stop loading button does nothing. Eventually I have to force quit. Anyone know anything?

    I'm kinda a noobie to a mac so forgive me if this is lame. I was reading this post and i have kinda the same problem except when i go to open safari it just flashes and says that it can't be opened. I have reset safari and emptied the cache and it still won't open. Although sometimes when i go to open safari if i click on the top sites button in the far left corner when trying to open safari it will open that way and let me use safari to surf anywhere i propose to search. Any answers would be greatly appreciated. Thanks

  • After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up.

    I am using MacBook Air with Yosemite OS. After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up. Could you please give me suggestions on how to fix this problem? Thank you

    That's a bit vague, but you may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates
    if it's not already checked.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Java applet freezes while loading on Firefox on Mac OS 10.9

    I am using Mac OS 10.9.4 with Firefox 32 and Java 7 update 67. The java applet freezes while loading for the first time. On double clicking, it loads successfully. Once the applet gets loaded then it loads successfully until the web-page is refreshed or cache is cleared. I don't see any error message or any errors in the java console logs. Any help on this issue, apart from the double click work around? Any permanent solution?

    This delay can also happen when Java has been unloaded from memory and needs to be reloaded from disk and (re)initialized.
    You may be tight on available (free) memory if this happens all the time.

  • Logic freezes while loading Space Designer presets

    Logic freezes while loading Space Designer presets when I am working on my template and songs. If I create 1 track in a new empty project there is no problem with Space designer.

    And with Logic 8, I am stumped as to how to find all of my samples and virtual instruments that I used in Logic 7...Where is the "folder" that I drag my Sampler Folder alias into? Any clues?

  • Safari won't open...freezes and then quits

    I'm running 10.3.9 and whenever I open Safari, it will open, freeze and then quit. I have the Cubs home page as the default page but I can't keep Safari open long enough to change it.
    I can't keep Safari open long enough to do anything, except submit more of those inane "Crash Reports" to Apple which probably don't do anything.
    Has anyone else had this problem? Does anyone know how to fix it? I've done Disk Utility and that hasn't helped.
    Any thoughts?

    Hi econwriter5!
    The first thing I would do is trash the Safari preferences, and Cache.
    HD > USERS > HOME > LIBRARY > CACHES
    Trash:
    Safari (Folder)
    HD > USERS > HOME > LIBRARY > SAFARI
    Trash:
    Icons (Folder)
    History.plist (File)
    HD > USERS > HOME > LIBRARY > PREFERENCES
    Trash:
    com.apple.Safari.plist
    Good Luck!
    ali b

  • Please help! Safari keeps hanging/not responding and freezes everything else up.

    I've got a mid-2009 MacBook Pro running OS X Snow Leopard (10.6.8) and Safari (5.1.9) keeps hanging/crashing. I'm afraid I'm not very good with these things so I'll just have to tell the story...
    It's happening when I start up Safari, either the home page (Google) doesn't fully load and the pinwheel appears, or it loads but as soon as I try to search or use bookmarks the pinwheel appears. I'm unable to quit Safari, open or close Finder or any software, and it won't shut down normally either. I've tried using Cmd-Option-Esc to Force Quit but the pinwheel appears again and nothing happens. The only option left is to do a hard shut down. After repeating this 5 or 6 times it eventually lets me use Safari, but will almost always hang again unexpectedly at some point during the day. I know this isn't the best way to deal with it but I don't know what else to do!
    I'm sorry if this question has already been asked and answered, but because I don't have an error report I don't know whether my issue is the same and don't want to start messing with things when I'm not sure what I'm doing. Thanks in advance for your help!
    P.S. The unexpected hanging and freezing started while I was running Leopard and an older version of Safari. I tried to back up and reinstall the OS but my optical disk drive wouldn't read the disk, so I had to take it to an Apple store where they couldn't find anything wrong but installed Snow Leopard and hoped that fixed the problem. It didn't, and it's since started happening on start up, as described above.

    Open Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then click Verify Disk.
    If the disk needs repairing, you will need to use the install disc(s) that came with your Mac.
    Help here >  Using Disk Utility to verify or repair disks

  • Safari doesn't open right and nothing works

    When I open safari there is no file edit view history or any of the bars at the top except the adress bar and it doesn't let you type in it. also the apple start page doesn't look right. I have safari on my windows laptop and it works great it dosn't work on my windows pc downstairs. Can some one help? Thanks

    Thanks I would have never noticed
    Thanks again!

  • Safari won't open window and crashes

    Earlier tonight I downloaded a program called Frostwire. It slowed down my computer and I immediately got rid of it and there is no sign of it on my computer. But ever since every time I try to open Safari no window comes up and it ends up quitting itself saying that it quit unexpectedly. I got rid of Safari and reinstalled the same version and after all of that it still does the same thing. I cannot figure out why this is happening, I emptied the cache and erased all the cookies and still nothing. Someone please help me.

    Have you by any chance installed the CT Community Toolbar/loader?
    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

    Hi Gurus,
    I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
    OS: OEL5 32 bit
    oifcfg iflist
    eth0 192.168.2.0
    eth1 10.0.0.0
    oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth1 10.1.1.0 global cluster_interconnect
    eth0 192.168.2.0 global public
    cat /etc/hosts
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    My questions are:
    should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
    if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
    Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
    Edited by: ayyappa on Aug 20, 2009 10:13 AM
    Edited by: ayyappa on Aug 20, 2009 10:14 AM
    Edited by: ayyappa on Aug 20, 2009 10:15 AM

    a step forward towards resolution but i need some help from the gurus.
    root# cat /etc/hosts
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost6.localdomain6 localhost6
    192.168.2.3 sunny1pub.ezhome.com sunny1pub
    192.168.2.4 sunny2pub.ezhome.com sunny2pub
    10.1.1.1 sunny1prv.ezhome.com sunny1prv
    10.1.1.2 sunny2prv.ezhome.com sunny2prv
    192.168.2.33 sunny1vip.ezhome.com sunny1vip
    192.168.2.44 sunny2vip.ezhome.com sunny2vip
    root# /u01/app/oracle/product/crs/bin/oifcfg iflist
    eth1 10.0.0.0
    eth0 192.168.2.0
    root# /u01/app/oracle/product/crs/bin/oifcfg getif
    eth1 10.0.0.0 global cluster_interconnect
    eth0 191.168.2.0 global public
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    ****ORACLE_HOME environment variable not set!
    ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
    root# export ORACLE_BASE=/u01/app/oracle
    root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
    root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
    root# export PATH=$PATH:$ORACLE_HOME/bin
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP does not exist.
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
    VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
    root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
    VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
    Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
    My questions to the gurus are as follows:
    Should ping on vip work? It does not work now.
    srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
    VIP is not running on node: sunny1pub
    GSD is not running on node: sunny1pub
    PRKO-2016 : Error in checking condition of listener on node: sunny1pub
    ONS daemon is not running on node: sunny1pub
    [root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
    Name Type Target State Host
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    ora....pub.gsd application OFFLINE OFFLINE
    ora....pub.ons application OFFLINE OFFLINE
    ora....pub.vip application OFFLINE OFFLINE
    Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

  • I just downloaded the Safari update to 5.1 and on my Xfinity homepage, nothing I click on will open up. What is wrong?

    After downloading the Safari update, and after MacBook had to do a restart, I went to my Bookmarks, clicked on XFinity to get my email. The home page opened, but nothing I have clicked on will open except the weather. I tried opening Email, TV, Support, Help, Log In, even the news stories and none of the links open. How do I go back to my previous Safari version so I can get my email?

    Its always a good idea to have a few browsers to use.  About 1/2 year ago Safari just stopped working intermittently and it took a lot of help from some of the experienced users on this forum to help me figure out why it was behaving the way it was.  Without Firefox I would have been in trouble (because when Safari stopped working so did Chrome).  Since then I have also downloaded Opera though I haven't used it.   And I have also discovered that different websites work better with one browswer than with another.  Anyway, I'm glad you figured out a way to get your emails. 
    laverne's mom

  • Safari slow and freezes when loading pages

    Hi I've been having a problem with Safari for the past few months it frequently freezes when loading web pages, sometimes it will eventually load, other times it wont. the blue progress bar in the address bar stops on about 10% with a plain white page it doesn't happen all the time but disturbingly it happens on pages as simple as Google search, not just data heavy sites. other symptoms include having to click links several times to get them to respond and I get the you are not connected to the Internet page when I go to some sites only to try another page from my bookmarks and it will load perfectly.
    Any help greatly appreciated its driving me nuts.

    I only posted the other post because I hadnt anticipated getting such a quick responce from you , Im on a tight deadline for work and I needed to get this problem sorted a.s.a.p, I didnt think that anybody else would hop onto this discussion Anyway heres the output I get
    Last login: Wed May  9 13:18:21 on console
    Gareth-Joness-iMac:~ gareth$ kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Gareth-Joness-iMac:~ gareth$ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
    WARNING: Improper use of the sudo command could lead to data loss
    or the deletion of important system files. Please double-check your
    typing when using sudo. Type "man sudo" for more information.
    To proceed, enter your password, or type Ctrl-C to abort.
    Password:
    Sorry, try again.
    Password:
    com.microsoft.office.licensing.helper
    com.adobe.SwitchBoard
    Gareth-Joness-iMac:~ gareth$ launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    com.wacom.pentablet
    com.adobe.AAM.Scheduler-1.0
    Gareth-Joness-iMac:~ gareth$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
    /Library/Components:
    /Library/Extensions:
    /Library/Frameworks:
    AEProfiling.framework
    AERegistration.framework
    Adobe AIR.framework
    AudioMixEngine.framework
    NyxAudioAnalysis.framework
    PluginManager.framework
    iLifeFaceRecognition.framework
    iLifeKit.framework
    iLifePageLayout.framework
    iLifeSQLAccess.framework
    iLifeSlideshow.framework
    /Library/Input Methods:
    /Library/Internet Plug-Ins:
    AdobePDFViewer.plugin
    Flash Player.plugin
    JavaAppletPlugin.plugin
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    SharePointBrowserPlugin.plugin
    SharePointWebKitPlugin.webplugin
    WacomNetscape.plugin
    WacomSafari.plugin
    flashplayer.xpt
    iPhotoPhotocast.plugin
    npContributeMac.bundle
    nsIQTScriptablePlugin.xpt
    /Library/Keyboard Layouts:
    /Library/LaunchAgents:
    com.adobe.AAM.Updater-1.0.plist
    com.wacom.pentablet.plist
    /Library/LaunchDaemons:
    com.adobe.SwitchBoard.plist
    com.apple.remotepairtool.plist
    com.microsoft.office.licensing.helper.plist
    /Library/PreferencePanes:
    Flash Player.prefPane
    PenTablet.prefPane
    /Library/PrivilegedHelperTools:
    com.microsoft.office.licensing.helper
    /Library/QuickLook:
    iWork.qlgenerator
    /Library/QuickTime:
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    /Library/ScriptingAdditions:
    Adobe Unit Types.osax
    /Library/Spotlight:
    Microsoft Office.mdimporter
    iWork.mdimporter
    /Library/StartupItems:
    /etc/mach_init.d:
    /etc/mach_init_per_login_session.d:
    /etc/mach_init_per_user.d:
    com.adobe.SwitchBoard.monitor.plist
    Library/Address Book Plug-Ins:
    SkypeABDialer.bundle
    SkypeABSMS.bundle
    Library/Fonts:
    Library/Input Methods:
    .localized
    Library/Internet Plug-Ins:
    Library/Keyboard Layouts:
    Library/LaunchAgents:
    com.adobe.AAM.Updater-1.0.plist
    com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.E3CFAA50-1194-4D76-B170-E96 8592213B6.plist
    [email protected]list
    Library/PreferencePanes:
    Gareth-Joness-iMac:~ gareth$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    iTunesHelper
    Gareth-Joness-iMac:~ gareth$
    Thanks

  • Basic. i connected my camera for download to iphoto as usual. this time nothing happens. iphoto doesnt open and no download begins. i opened iphoto and still nothing. what happened?

    Normally when i connect my camera to the computer, iphoto opens up and a download begins immediately.  This time, nothing opens.  Not iphotos, or kodak.  I opened iphoto to see if that would start things but nothing.  What do i do?

    Try image capture (in your applications folder)
    Does your camera mount to the desktop - drag your photos to a desktop folder
    once you get the photos off of the camera use the camera's format command to erase them and renew the memory format - in the future do not let iPhoto (or any other program) delete your photos - always properly disconnect and later (I prefer after at least one backup cycle) use the camera to format the memory
    LN

  • Why does elements 13 crash and freeze while starting up while using windows 8.1

    Have had problems with crashes and freezing up with both elements 12 and now elements 13.   Thinking there are problems with Windows 8.1 and adobe premiere elements.   Can anyone shed any light on this issue?

    Perhaps you also need to reset the preferences file for your both PSE12 and PSE13.  The suggested method for earlier versions (10 and 11) was posted here:
    <can't get pse10 to take my styles, have had pse 10 since 2011 bought pse13 and installed, uninstalled pse10 inorder to get pse13 to install easer, I reinstalled pse10 but now the stules I have do not appear in the effect section. I have checked BOTh secti>
    Read post number 3 to see if it works in PSE12 and PSE13.  Do 12 first and then 13.

Maybe you are looking for