Safari behaving differently with site on .mac/external server

Hello. I've started creating a little webpage of mine and I've noticed that when uploaded to .mac the top bar (for selecting pages within the site) works correctly, but when the site is uploaded to an external server the top bar goes bust. It is so under Safari, not so under Firefox, which seems to "decode" everything correctly. Here are both pages (identical uploads):
.mac: http://web.mac.com/milosz.sosnowski/Site/Start.html
external: http://www.staff.amu.edu.pl/~miloszso/Site/Start.html
Thank you for your help

milosz.sosnowski wrote:
Could someone please delete this topic
There are worser topics sometimes
I just wanted to say that...
If a change doesn't display to you in the browser after you published and uploaded it mostly is because the old version of the page is cached (memorized) by your browser. Thus simply emptying the cache of the browser (Open Safari, choose Safari from the menu and go to Empty Cache) and reloading the page should display the changes.
Regards,
Cédric

Similar Messages

Adobe flash media encoder compatibility with the lion mac mini server

Can anyone tell me if the adobe flash media encoder is compatible with the lion mac mini server?

I am running adobe live flash encoder on a new mac-mini server with Lion and am able to stream video just fine - however I get a hum in the audio. I am not sure whether the hum is caused by the audio input, the camcorder, the adobe encoder, or the combination, but it seems to be the camcorder's fault.
There is a manual about migrating or upgrading to lion server, but none about instituting a new capability from scratch

Office or Creative Suite with site licensing on Lion Server

Can Office or Creative Suite with site licensing reside on a mac mini server for the network to use or do the applications need to be on each computer in the network?

The big software makers constantly winge about customers must ensure they are legal regarding software licensing. However they not only don't make this easy, they actually go out of their way to make it hard in terms of purchasing, license management and auditing. We will ignore the separate issue of some of them actively ripping customers off over pricing (I am looking at you Adobe).
I can say that it was technically possible with Office 2004 for Mac to install a single volume-license version of Office on a server and run it sumultaneously on multiple client logins. I have not had the opportunity to try this with Office 2012 for Mac.
Note: I had more than enough individual Office 2004 licenses to cover the number of clients when I did this.
Another approach to investigate is the use of KeyServer from Sassafras Software. This can take a standard version of an application and wrap it with extra license management code. The KeyServer software then controls how many simultaneous copies can be run, you can even book copies out for use on a laptop you are taking out of the office. The booking would be for a fixed time limit after which it is released and no longer works until you contact the license server again.
See http://www.sassafras.com/licensing.html
I believe in the past and maybe still now, that Sassafras worked with the major software developers to enable this. I don't know whether Adobe, Microsoft, etc. are still enabling this or whether they have continued to show their stupidity by stopping this and making license management even harder. I suggest you contact Sassafras to discuss this.
Note: Even though FileMaker has serial numbers and user licenses, it is possible to easily manage things using a single serial key as FileMaker let you buy a volume license key and you are simply allowed to run up to a that specific number of simultaneous copies, there is none of the stupid hassle of product activation etc. linked to individual hardware devices.

Mac FF and PC FF acting differently with site spacing

Hi Everyone.
I am building a site via dreamweaver and am having problems with how the site is displayed on a Mac and how it is on a PC.
I currently tweaked the page to look right in Mac FF ( http://agrevl.com) and the spacing is now off in FF .
For example, please look at the footer. In PC, the zip code doesn't line up with the right side of the image above it, in Mac it does.
Example #2: when on the WORK page, if you click on BTS , M Vids, or Commercial, the navigation on the left drops 5 pixels. It looks okay on the Mac, but this happens on the PC now. When I fix the PC by changing the spacing, it looks bad on the mac...
Not sure how to correct this. Please help, and all help greatly appreciated.
Adam

Hi,
I checked your site on FF, IE both win and mac, and your site
looks the same. The contact button is displayed properly in all
browsers. Did you tried to delete the browser cache from your
wife's machine?
Diana

Firefox behaves differently with different PDF docs on my web site

I am running Firefox 3.6.6 on Windows 7 Home Edition. When I update a PDF file on my web site, and I try the updated web page in my browser, Why does my browser prompt me to save the file with the updated file, but it displays inside the browser with other pdfs on my site? I get the same results with IE. The files are very similar, but yet, the browsers treats them differently.

''Possibly'' because when you access the file from your hard disk (I assume that's what you mean by "try the updated web page in my browser") and when you access it from a webserever, the file type is different. If you're brought up with windows you might think that the file type is determined by the extension (.pdf) but it's not. Depending on the webserver, your operating system, and your browser, it ought to depend on the 'mime type'
So try uploading the amended page to your webserver (in a test area) and see if it works off the web.

IOS 8 Safari not working with sites using Windows Authentication (again)

A testbed of iPhones and iPads were updated to iOS 8 today. When trying to access intranet sites in our company that use Windows (IIS) Authentication, it challenges for the login and password 2 or 3 times, then nothing - just hangs. These sites work fine on iOS 7 devices - and worked on the same devices that were upgraded.
Windows Authentication was broken in iOS 7.0 also and not fixed until a later update. Why does this keep getting broken?

This was a thread that discussed this when it was broken in iOS 7.0...
https://discussions.apple.com/thread/5327078?start=0&tstart=0
I just tested with Chrome on the iPhone upgraded to iOS 8 and it works fine. It is Safari that is broken again.
Of course, Apple won't give us a way to make Chrome the default browser when links are clicked in emails, so it's not exactly a solution.

Safari behaves differently on every pc i install it on?!

I've installed safari on three of my pc's, and every single one has different features and behaviors. For example, on my laptop, "history" doesn't give me a graphical display of my sites, and on my other two it does. On one of them, i don't have a "top sites" option in my home page setting.
It seems that on none of these three pc's do i have all the features that apple lists this browser as having, and without them, i don't see why i bothered installing it. I can't be having different behavior on each pc i have, i need to maintain a consistent look and feel from all my pc's in order to work efficiently.
If anyone knows why it installed differently on three pc's all using the same download, let me know please.
Message was edited by: Volter

Hi,
If anyone knows why it installed differently on three pc's all using the same download, let me know please.
You haven't mentioned what any of the differences are between your PCs are, but maybe this article applies:
http://support.apple.com/kb/HT3410

Onkeypress behaves differently with FF and IE in a table td tag

Here is a sample web page: If you click on the cell with the "abc" (not necessarily on the abc, but in the cell), then type a key, with IE (am using IE9) I get the alert, reporting which key was hit.
With firefox (and, for the record, Safari), I get nothing.
Is there anyway I can achieve something similar - I can't just make the cell an input field...
<html>
<body>
<script type="text/javascript">
function keyhit(e)
var keynum,keychar;
if(window.event) keynum = e.keyCode; // Internet Explorer
else if(e.which) keynum = e.which; // Netscape/Firefox/Opera
keychar = String.fromCharCode(keynum);
alert("You pressed "+keychar);
</script>
Click on the "abc" in the table (or anywhere in that cell, and kit a key.
<table cellspacing=0 border=1 width=120>
<tr height=50>
<td width=60 onkeypress="keyhit(event)">abc</td>
<td width=60>xxx</td>
</tr>
<tr height=50>
<td>xxx</td>
<td>xxx</td>
</tr>
</table>
</body>
</html>

Start by repairing the code validation errors reported here:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.archbold-station.org%2Fstatio n%2Feditreg.html
References to external javascripts and stylesheets.css belong between the <head> and </head> tags. You have them in the wrong place.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
Tutorials - http://w3schools.com/

Solaris 11 driver behaves differently with 3G and 6G hba

Hi,
I am using ioctl with uscicmd driver, in the 3G LSI Sas hba, when there is a check condition, the sense bytes are
returned normally, however, when a 6G LSI Sas hba is used, when there is a check condition, bad sense bytes are
returned.
Is there a solution for solving the bad sense bytes problem?
Also let me know if I am not posting in the right forum.

902400 wrote:
Also let me know if I am not posting in the right forum.Where did you buy the HBA's?
If you purchased them from Oracle/Sun, then this web site is appropriate.
If you purchased them from somewhere else, then you need to go ask them (ultimately LSI) for assistance.

SQL 2012 database behaves differently with a unique index and ignore_dup_key = on when inserting data. It works on SQL 2008 db

If you have a table with a unique index and ignore_dup_key = on and you INSERT rows into that table with an ORDER BY clause (because you want to control which of the duplicate
key rows gets inserted), the wrong row gets inserted in SQL2012. It works correctly in SQL 2008.
We have recently migrated a database from SQL 2008 to SQL 2012. We do have few other dbs which are in compatability mode 100. The above operation works fine
in SQL 2008 dbs but not SQL 2012.
I've even tried applying the latest patch for SQL 2012 SP2 with CU2. Still the problem exists. I'm going to call MS support, but want to know if anyone has come across this problem ?

The MS documentation doesn't guarantee that the first row of the duplicates will always be inserted and the next duplicate row(s) get(s) ignored. Where did you find it in the MS documentation? I think you were just lucky that it was always inserting the
first row in SQL 2008 (and ignoring the rest of the duplicates) - I don't think this is guaranteed
Satish Kartan http://www.sqlfood.com/

Why does terminal behave differently with respect to "Resume" feature?

Terminal behaves a little funky when it comes to the new "Resume" feature in Lion. Here's a few interesting notes:
When restarting, Terminal prompts the user to close itself. If you don't click close in time, the reboot process is halted. This ***** because resume gets confused. When you close Terminal and reboot, Resume only opens applications that were closed AFTER terminal was manually closed. This is only a small subset of applications that were originally opened from the first reboot attempt.
If you do manage to close terminal in time, it only comes up on Desktop 1 after resume. This is fine if that's what you want, but I have terminal configured on "All Desktops". To workaround the issue, I have to set terminal to "This Desktop", then "All Desktops" EVERY TIME I REBOOT.
No other apple programs seem to do this.
Where do I log a bug/feature request for this?
Cheers!

Done! Thanks!
https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa/6/wo/iLhrfiEtEJtPFTt J8S23O0/23.83.28.0.9
https://bugreport.apple.com/cgi-bin/WebObjects/RadarWeb.woa/6/wo/iLhrfiEtEJtPFTt J8S23O0/23.83.28.1.9

Beans behaves differently with more requests

Hi,
I have the following part of jsp calling my bean
<jsp:useBean id="proj_fileCopy" class="bean.FileCopy">
          <jsp:setProperty name="proj_fileCopy" property="source" value="<%=userFile_Share+"//"+newFileName%>" />
          <jsp:setProperty name="proj_fileCopy" property="destination" value="<%=newFilePath%>" />
          <jsp:setProperty name="proj_fileCopy" property="filecopy" value="" />
       <jsp:setProperty name="proj_fileCopy"   property="toocopy" value="" />
     </jsp:useBean>
proj_fileCopy.callMethod();when I call the bean with just single user logged into my application the bean completes a task within 2 minutes.
whereas simultaneously when multiple users get logged in the bean takes twice the time i.e., 4minutes.
In the bean I have the follwing part of code in which the bean executes a command prompt task and waits till the command prompt task gets completed as shown below
ProcessBuilder builder = new ProcessBuilder(command);
builder.directory(new File(commandtask));// gives the script location
Process p1 = builder.start();
InputStream is = p1.getInputStream();
InputStreamReader isr = new InputStreamReader(is);
BufferedReader br = new BufferedReader(isr) ;
String lineRead = br.readLine();//
while(lineRead!=null)
          counter++;
          lineRead = br.readLine();
          //System.out.println("lineRead:"+lineRead);
     }what can I do for this.

Hi balusc,
I tried with java. any way I will give a try again.I have posted my code below. please go through them and suggest some tips to make them efficient.
I know its too lengthy, but I hope I can get some help to make it efficient
below is the jsp that passes parameters to bean
<jsp:useBean id="trasfer" class="bean.UploadFile" >
<jsp:setProperty name="trasfer" property="previousVersion" value="<%=srcPath%>" />
<jsp:setProperty name="trasfer" property="backupID" value="<%=File_Name%>" />
<jsp:setProperty name="trasfer" property="userpath" value="<%=File_Share%>" />
<jsp:setProperty name="trasfer" property="projpath" value="<%=newPath%>" />
<jsp:setProperty name="trasfer" property="newFileName" value="<%=newName%>" />
<jsp:setProperty name="trasfer" property="Destination" value="<%=destPath%>" />
</jsp:useBean>
<%
trasfer.goAhead();
%> Below is the bean that takes the parameters from jsp. I call the goAhead() method from jsp.
import java.beans.*;
import java.io.Serializable;
import java.sql.*;
import java.io.*;
public class CopyFile extends Object implements Serializable {
    private String previous_Name = "";
    private String backup_ID = "";
    private String user_Path = "";
    private String project_Path = "";
    private String currentVersion_Name="";
    private String backup_Src = "";
    private String backup_Dest = "";
    private String fileType_ID = "";
    public CopyFile() {
    public void setPreviousVersion(String previous_Name){
        this.previous_Name = previous_Name;
     public void setBackupID(String backup_ID){
        this.backup_ID = backup_ID;
      public void setUserHomepath(String userHome_Path){
        this.user_Path = user_Path;
        public void setProjpath(String project_Path){
        this.file_Path = file_Path;
          public void setNewFileName(String currentVersion_Name){
        this.currentVersion_Name = currentVersion_Name;
          public void setBackupSource(String backup_Src){
        this.backup_Src = backup_Src;
     public void setBackupDestination(String backup_Dest){
        this.backup_Dest = backup_Dest;
        public void setFileType(String fileType_ID){
        this.fileType_ID = fileType_ID;
        public void goAhead(){
           try{
                File backupFile = null;
                String user_File = user_Path+"/"+currentVersion_Name;
                String proj_File = file_Path+currentVersion_Name;
               if(!previous_Name.equals("")) {
                   File prv_Version = new File(previous_Name);
                   backupFile =    new File(project_Path+backup_ID);
                   backup_Dest = backup_Dest+backup_ID;
                         //the below code copies the file to location B
                   TransferFile copyVersion = new TransferFile();
                   copyVersion.moveFile(user_File,proj_File);
                   //the below code copies the file to location C
               //In this class only I am calling wait.For() method
               BackupVersions copyBackup = new BackupVersions();
               copyBackup.moveFile(backupFile.toString(),backup_Dest,"BACKUP");
           }catch(NullPointerException npe){
               System.out.println("NPE in CopyFile"+npe);
}will continue uin next post

New iPod behaving differently with iPhone headphones

I just had an iPod Touch go bad and had it replaced at an Apple store. I aslo have some "iPohone" headphones that have the answer button. On my first iPod the answer button would work as a pause and play button, but on my newer one it's not doing that....I REALLY liked having this feature. Does anyone know what the difference might be?

I have the same problem with my iPod Touch using Apple headphone. The remote worked well for months, then stop working until now - rendering them pretty useless, mic still work thought...
I tried everything, even restoring the iPod. Nothing worked, this is a iPod OS software glitch that Apple doesn't seem willing to fix anytime soon. As a result, I'm barely using my Touch since it's a pain in the a*s having to take it out of the pocket, unlock, etc., everytime I want to pause or skip track. Stupid move here Apple, FIX THIS ASAP APPLE...
Message was edited by: Praeliber

MBST behaves Differently with MIGO Cancellation

Hi,
I have configured some customised movement types to have their reversed movement types as "qty can be entered...". That is, the quantity can be changed when performing cancellation of material document.
It works well with the old transaction MBST and MB1A (cancel with reference to material document). However, when I try it with MIGO with Cancellation option, it does not work. The quantity field is grey out, not changable. Anyone any idea why is this so? Thanks.
Regards,
Norman

Hi Norman,
As an option, you can go into the MIGO transaction, use same selections as you would to create the goods receipt document (ex. Goods Receipt, Purchase Order) but in the movement type field, select your reversal movement type. Quantity field is open for change. From what I'm seeing (and from what you stated) the Cancellation option in MIGO assumes the full quantity of the material document is being reversed.
Regards,
Dawn

Pack() method behaves differently with JRE1.5 and JRE1.6?

Any diffrence in pack() in JRE 1.5 and JRE 1.6.

Why don't you look for yourself. Get the file containing the pach() method from both JDK 1.5 and 1.6, and compare.

Safari behaving differently with site on .mac/external server

Similar Messages

Maybe you are looking for