Safari browser won't exit YouTube unless I switch the phone off! Please help

I am new to Iphone just recently, I have been using Android for a few years and it had its problems too. On iPhone 6 , if I use Safari and go to YouTube it gives  me the option "done " top left corner, but when I click it nothing happens, it refuses to let me exit YouTube frequently.I have to switch the  phone  off to use the browser again! Please help! Dont know what to do here, bit frustrated since this phone is very expensive And simple features are troublesome! I enjoy the phone but this is ridiculous, if anyone has a solution please reply. Thanks in advance!

Try the standard fixes one at a time:
- Reset. Nothing will be lost
Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults/new iPod
If you still have the problem it is likely do to a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

  • I cant charge my iphone unless i turn the phone off and then on again then it will start charging

    i cant chargemy i phone unless i turn the phone off and then turn it on then it will start charging help plzzzz

    If the Apple Hardware Test doesn't reveal any hardware issues, try Resetting the System Management Controller (SMC)

  • My Samsung Galaxy Camers SD Card just won't work on my iPad via the camera connector - please help!

    Hi, I have a Samsung Galaxy Camera and I try to connect my Micro SDHC card via the iPad camera connector kit.
    This has worked in the past with other memory cards but this is a new one and each time I go to the import option on my photos it says "No Photo"
    I use an adapter to connect the sd card as it's micro, I have tried my other adapter to connect the camera via the lead however the accessory is not supported due to the camera needing more power!
    I have read someone else's post and they suggested to reformat the card, I have used the disc utility to format it however it's saying its FAT32. I can't seem to format my card through my camera either?!
    I'm at a loss as to what I can do and my local Apple store have stopped giving appointments to the Genius Bar so hoping someone here might help me out  
    I want to use my camera at christmas but know the picture upload is going to be a nightmare!!!
    Thanks

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
    iPad: Using iPad Camera Connector with unsupported USB devices
    http://support.apple.com/kb/ht4106
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • Iphone 6 gets stuck on text messages and will not function unless i turn the phone off

    Are others experiencing difficulty with the I phone 6 getting "stuck" on text messages?

    I also have the same problem on my 6+

  • HT2521 A pop up window in my safari is not closing. Even after several clicks on OK it keeps popping up. And the open window is not allowing me to use the Safari nor is it allowing to restart/Shutdown the Mac. Please help me rectify this error.

    A pop up window on my Safari does not close even after several clicks on OK... this window keeps popping up and is not allowing using the safari nor is it alowing to close the browser. The open Safari is also not allowing to restart or shutdown the notebook. Please help me rectify the problem.

    Force Quit .
    Press command + option + esc keys together at the same time.    Wait.
    When Force Quit window appears, select  Safari, if not already.
    Press Force Quit button at the bottom of the window.      Wait.
    Application will quit.
    If this does not help, press the power button for 7 or more seconds.
    Computer will shut down.
    Restart.
    Hold the shift key down and launch Safari.
    Best.

  • HT1766 I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be comp

    I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be compctable with new soft ware. I do bnot agree with their finding because i have I phone with ISO 7 updated soft ware and same files run on my I phone but not on I Pad. This was working fine before updating new software. This device is useless for me if i can not watch the program that i bought this for. I want device to replaced or taken back by the company. Thank you

    Here are the iPad Mini specifications:
    iPad mini - Technical SpecificationsNov 1, 2012
    The specifications explain exactly what types of files are supported under "TV and Video".

  • Why when i click to open safari does it keep telling me the safari browser version i am using does not support the community toolbar ?

    Why when I am clicking into safari does a message appear telling me that the Safari Browser version I am using does not support the community toolbar ???

    You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
    If the instructions don't work, proceed as follows.
    Triple-click the line below to select it:
    ~/Library/Application Support/Conduit
    Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
    Go ▹ Go to Folder…
    Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
    Repeat with this line:
    /Applications/Toolbars
    Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
    /Library
    Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    Close the Finder windows you opened. Log out and log back in.
    I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

  • My new imac won't operate youtube even after installing the latest flash

    my new imac won't operate youtube even after installing the latest flash

    Problem solved!
    I had downloaded and then installed Flash, and restarted. 
    The problem?  I was expecting Youtube to work as on my old PC, where you get a little pop-up menu at the bottom of the TV screen to play. pause etc.  That won't happen on a Mac until  you click on the oblong that says Flash in the middle - I didn't know that!
    Hooray!

  • On an iMac I can't enter any text in safari or Firefox header bar. In all my program's I just have the arrow cursor and can't change to any tools in the tool bars - please help!

    I cant type any text in safari or and in all programs i have the arrow cursor and can't change to any tools in the tool bars - please help!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Any ideas as to why my iPhone 3GS wouldn't be receiving any messages or voicemails unless I turn my phone off? Also, it isn't able to open any apps that require the internet.. Help??

    Any ideas as to why my iPhone 3GS wouldn't be receiving any messages or voicemails unless I turn my phone off? Also, it isn't able to open any apps that require the internet.. Help??

    YOu can try resetting your network or a reboot.  To reboot hold down the home/power button together until you see the apple logo and then release.  Wait for the phone to boot back up,  you won't lose any data.

  • HT202152 I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help

    I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help.

    For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    In Photos:
              File ▹ Show Recently Deleted ▹ Delete All
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install the app in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
    For ODS:
    security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
    For GP:
    security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
    The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    "Where do I find my hundreds of dollars of downloads I have done since 2005?"
    They will only be where you put them  If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
    The itunes store is not global at all, never has been. You cannot redownload your content from another country.  You can only use the countrys itunes store for the country that you are physically located.

  • TS1702 My youtube app is no longer working on my iphone 3. Others, with the same phone, are not having the problem. It works occassionally, but it's unpredictable. I've updated phone software, deleted the app, re-downloaded the app, turned the phone off a

    My youtube app is no longer working on my iphone 3. Others, with the same phone, are not having the problem. It works occassionally, but it's unpredictable. I've updated phone software, deleted the app, re-downloaded the app, turned the phone off and on...nothing.

    You may have debris in your headphone jack blocking the sensor.  Try blowing hard on the jack, and inserting/removing your headphones quickly multiple times to clear it.

  • I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC.  I have to turn the phone off and then on again for it to connect.

    I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC.  I have to turn the phone off and then on again for it to connect.
    Why is this?  My husband's 4s is still on IOS7 and it still connects automatically.

    I do not know if this will help.
    For a limited time Apple will allow you to downgrade to 7.1.2.  Hurry do not wait.
    See brownox second post here:
    Are there known problems with hdmi screen display and iOS 8?
    and
    http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/

  • My iphone froze last nite and i was unable to exit the app i was on, it then switched the screen off as if it was not in use, now i am unable to open my iphone or switch it off, calls are still comin thro as phone is vibrating but im unable to answer

    my iphone froze last nite and i was unable to exit the app i was on, it then switched the screen off as if it was not in use, now i am unable to open my iphone or switch it off, calls are still comin thro as phone is vibrating but im unable to answer as cant activate the screen?????
    pls help

    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    More Info here...
    https://discussions.apple.com/message/19521062

Maybe you are looking for