Safari buggy after upgrade to Mtn Lion

Pages or parts of pages won't load -- especially pics -- and links won't work. Some pages are fine, and it rarely crashes or freezes entirely. Everything works fine in Firefox. Have run Cocktail a few times and no improvement. Are my privacy and addblocking addons a problem? Upgrading to Safari 6.0.2 didn't help.

Plugins can often cause problems, especially of this sort.
It's easy to verify: Just disable those plugins and then reload the pages that are giving you trouble. If the pages then load OK, you have your answer.

Similar Messages

Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

I can't add new contacts after upgrading from Snow Leopard to Mountain last week. I do not use iCloud. Any suggestions?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Installing Windows 7 on Bootcamp after upgrade to Mtn Lion

Before installing Mountain Lion I erased Windows XP and all contents from Bootcamp. Now I am running Mountain Lion and attempting to put windows 7 on Bootcamp 5.0.0. I ran the disk utility on Bootcamp and it shows (formatted as Mac OS Extended (Journaled) with 35 G available and nothing on it.
When I begin the Bootcamp assistant gives me a message "The Startup Disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing witndow." I clicked OK and was able to download the support software. Once I did that I inserted the Windows 7 CD but the Bootcamp assistant doesn't let me check the install box.
How do I install Win 7 in bootcamp. Thanks for your help.

It appears you did not remove XP correctly. Did you use Bootcamp Assistant to remove XP? If not then you have messed up your hard drive. You will need to reformat the drive and return it to a single Mac OS Extended (journaled) format. You can/should not use third party tools when working with Bootcamp partitions. Camptune does work to resize a Bootcamp partition but Bootcamp Assistant is the tool to use when creating/removing a Bootcamp partition.

Can't manually backup after upgrading to Mtn Lion

I recently updated from Snow Leopard to Mountain Lion. I used to backup my mac with Clickfree 1TB hard drive with no problems. Now I am unable to. First it acts like it needs to be installed and when I go through the process then it spits out the following: "NTFS-3G" error. In detail it reads: NTFS-3G could not mount/dev/disk1s1 at/Volumes/Clickfree_Storage because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8). The MACFUSE file system is not available (71).
Does anyone have any idea of what the issue is? Thanks in advance!

Boom Done! That was way easier than I expected it to be. $19.99 for a quick download is way better than $300 for a Time Capsule Drive. My files are backed up again and I'm a happy camper.
Thanks again for the quick response and easy fix!

After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

Well, I found the solution here in another thread.
i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
So I found the solution here.
Thank you graphicsluc!!!

After upgrading to Mountain Lion, i can't connect to app store or safari

After Upgrading to Mountain Lion, I can't access the app store, itunes store, Safari - anything that requires the internet. I tried resetting my modem and rebooting.
I also tried deleting items from the keychain that look like they are related to the above. When I did that and rebooted, It works for a little while, and then gets back to where it won't login to anything on the internet and safari won't load anything.

This means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

Safari showing text as boxes with A in them after upgrade to OSX lion

Hi,
After upgrading to OSX Lion and the new Safari that comes with it 6.0. It is showing a lot of the charachters on some websites as a box with a capital A in them. These are then pastered all over the site.
If i go to other browsers it is fine. Also when i copy and paste these A boxes it to the search bar it shows the correct text. But when viewing the page it is impossible to view the text and makes for an unpleasant browsing experience.
Any idea how to fix this issue? Is it a font issue? I have not changed any of my fonts and I would assume that the browser would be using a standard web font.
Any help on solving this riddle would be appreciated.
Thank you.

Font problems and management in OS X
Troubleshooting Bad Fonts in Mac OSX

Why has my Safari and MAIL slowed after upgrading to Mountain Lion on my MacBookPro ?

Why has my Safari and MAIL slowed after upgrading to Mountain Lion ? I have mid-2009 MBPro and have very fast Internet access router.

I have noticed the same thing on my MAC. Mail has become very "clunky"- Before Mountain Lion, whenever I clicked on a msg or a function (delete), it would respond immediately. With Mountain Lion there is an unacceptable hesitation. What is going on with this latest update?

After upgrading to mt lion, i lost the option to 'empty cache' on my safari browser. how do i get the option back or how do i empty my cache?

After upgrading to mt lion, i lost the option to 'empty cache' on my safari browser. This interferes with some playing pogo games and other issues related to Java. How can I get the option back or how do I empty the cache?

Go to Safari > Preferences > Advanced and check Show Develop menu in menu bar. Then it's in the Develop menu.

After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occasionally lock-ups.

After upgrading to Mountain Lion on my 2011 27" iMac, my Mac occassionaly locks up while using Safari, Mail or Dreamweaver and I have to d a force-quit, then restart my Mac. Anybody having similar probelms?
I am thinking about doing a clean install of Mountain Lion. Would I be able to restore my applications and data from Time Machine after the re-install?

My 24 inch iMac... 2.8 GHZ dual core (Early 2008) is having the same problem. After it sleeps, I go to use something... and the beachball of death occurs. This happens multiple times a day... and let me tell you... it is annoying... and I am the one who is being annoyed!
It could possibly be revolving around safari... as that is really the only thing that is running consistently. I don't use iTunes on this iMac as I have so many other Macs up and running in the house... and I never consume media on it... so I kind of dismiss iTunes being the culprit.
This is majorly affecting my Mac... in terms of reliability and uptime... which coincedently is the main reason why I switched to Mac in 2008. This is my only Mac that could upgrade to ML... so I don't know how widespread this is... but I hope that this problem can be solved...
I agree with another person who commented on this issue... do we really need a 10.8.1 update already... to fix this?

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

After upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer or even off my iTunes library

after upgrading to mountain lion, i cannot play any video at all, be it directly off a DVD, or through streaming like youtube, BBC iplayer, love film or even directly off my iTunes library. in each case, all i get is a black screen and no error message.

Hi, i had the same problem and tried this,
Somehow iTunes is tied to Safari. Try this:
Someone mentioned to clear all website data and history in safari, stupid but it was either this or the below that fixed it
or this,
Disable Wi-Fi Networking Services
Many users have reported that they’ve solved their issues by disabling Wi-Fi Networking under Settings > Privacy > Location Services > System Services. This only relates to your location being used for Wi-Fi Networking, so it doesn’t disable Wi-Fi entirely.
Please let me know if it works.

After upgrading to mountain lion my calendar does not print in weekly mode anymore

after upgrading to mountain lion my calendar does not print in weekly mode anymore

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

After upgrading to Mountain Lion, launching iPhoto reboots MBP

After upgrading to Mountain Lion, when I go to launch iPhoto, my MBP re-boots. This happens every time I try to launch iPhoto. The re-boot has occured randomly when using Safari and iMovie. Looking for help.

I was hopeful thAt this would help, but it did not. Still experiencing the same behaviors.

After upgrading to mountain lion, my ip camera video feeds time out

I've been using my iMacs for a few years to monitor six ip Camera video feeds. The cameras I use are both FOSCAM and AXIS brands. I've used a few third party software solutions to do the monitoring, but I could also always use Safari to access a camera at a time by putting that camera's IP address in the address field and logging into the camera.
After upgrading to Mountain Lion, my video feeds started timing out when using DComplex's IP Camera Viewer, so I thought initially it was strictly an issue with that third party app. However, I then logged into my cameras using Safari and they timed out as well. Similarly, when using Axis Camera viewer, my video feeds would time out. It seems as whatever the issue, it does not affect Firefox, because I can still login and monitor 1 feed at a time using that browser without any timeout issues, and for some odd reason, the FOSCAM only program uFoscam works, but the problem for me with that app is that it only works with Foscam, and not the Axis cameras (besides it's an inferior program to IP Camera Viewer in my opinion as well).
Has anyone encountered this problem and come up with a solution? I'm thinking it's some sort of plugin or video codec problem, but it's well above my paygrade to figure it out.

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

Safari buggy after upgrade to Mtn Lion

Similar Messages

Maybe you are looking for