"Safari" can't be modified or deleted because it's required by Mac OS X.

Trying to delete Safari I get the message “Safari” can’t be modified or deleted because it’s required by Mac OS X.
Trying to delete through Utilities/Terminal using "sudo rm -rf Safari.app" didn't work as Terminal
froze at the typing in of Password stage.

But I want to use Safari; I have Safari 7.0.4 in Applications which is incompatible with my 10.8.5 system.
Carolyn Samit recommended trashing one copy of Safari so I could use the other (6.0.3) which I have (from a back-up)
If I try to use the 6.0.3 on my desktop it says Safari can't open because of a problem.

Similar Messages

I have somehow compromised by Time Machine. Error Msg is "Time Machine.app can't be modified or deleted because it's required by Mac OsX. Would you please advise what I can do?

Hi All,
I have somehow compromised by Time Machine. Error Msg is "Time Machine.app can't be modified or deleted because it's required by Mac OsX. I wish to restore previously files that are on my external hard drive. I was doing just find a couple of days ago. Would you please advise me on what I can do to restore it's finctionality?
Yours feeling more than a bit stupid,
David

Click the Apple menu at the left end of your menubar. Select "About this Mac." You will get a window like this:
Your Mac OS version is indicates in the image by the upper red arrow. While you are there, please tell us what information you find for "Processor," where the lower red arrow is pointing.

HT201628 I tried following the steps in this article. When I attempt to delete iTunes, it says "iTunes" can't be modified or deleted because it's required by Mac OS X. What other steps could I take to get my MacBook Air to recognize my iphone again?

I tried following the steps in this article. When I attempt to delete iTunes, it says “iTunes” can’t be modified or deleted because it’s required by Mac OS X. What other steps could I take to get my MacBook Air to recognize my iphone again? Neither iTunes nor iPhoto recognize my phone any longer.

iTunes can't be deleted because it comes with OS X. In order to delete it, open Terminal and copy:
sudo rm /Applications/iTunes.app
This will remove iTunes, so then you can reinstall iTunes

"iCal" can't be modified or deleted because it's required by Mac OS X.

I have tried to restore a previous version of iCal from a time capsule back up, but keep getting the error message
“iCal” can’t be modified or deleted because it’s required by Mac OS X. can anyone help?

Ah - you mean your calendars rather than the iCal application. It's no good trying to restore the application: the iCal calendars are held in (user)/Library/Calendars and you would need to restore the earlier version of that from a backup such as Time Machine.
Even if you able to do this, syncing will just remove the deleted items again. Are you syncing with MobileMe? - please see this page:
http://www.wilmut.webspace.virginmedia.com/notes/timemachine.html

TM error: can't be modified or deleted because it's required by Mac OS X.

I found the TM didn't restore 2 folders which are most important after I reinstall my OS.
namely, the "applications" and "user" folders.
which appeared the "xxxx" can’t be modified or deleted because it’s required by Mac OS X error message.
therefore, all my past applications are not restored after the reinstallation.
what happened?

it's strange that those things were not transferred in the first place. they should have. this might indicated that there is a problem with your backup. when you are attempting to restore applications by hand don't restore the whole Applications folder. the message you got indicates that this is what you were doing. restore only the apps themselves. also, you can do it ONLY with applications that were installed by drag and drop into the Applications folder. if an application was installed using an installer you can not restore it this way and should reinstall it from scratch.
what exactly in the user folder are you trying to restore? some folders in your home directory are protected by deny delete ACLs and can not be restored like this. this includes your whole home directory, and all the default folders on it's top level. but you can restore files and folders inside those and any files and folders you created yourself.

"[item name]" can't be modified or deleted because it's required by OS X.

OK, so I purchase ID3 Editor.
• Download a .dmg file.
• Open disk image:
• Instructions tell me to copy software to Applications folder. Which I do.
• Want to rename the Extras folder so that it reads "ID3 Extras", and shows up next to the App it refers to when in list view (have done this forever in Mac OS)
• OS will not allow me to rename folder. If I highlight it and hit "return", nothing happens.
• OK, I create a new folder, name it what I want, move the contents of "Extra" to the folder. Done. Now all I have to do is to delete the unwanted, empty, folder, right?
• Wrong, when I try to delete it, by any method, I get the message:
“Extras” can’t be modified or deleted because it’s required by OS X.
I've just installed this item. It is NOT required by OS X for anthing. I should be able to modify my Applications folder at will.
Will someone, for the love of God, tell me how I might be able to delete this unwanted, unneeded folder from my Applications folder?

You can't. Either turn it on or off. Why do you need to use VO's activation keys? Why can't you just use different keys?

I am having a problem with Time Machine, the error msg is "Time Machine.app can't be modified or deleted because it is required by MacOsX". It was working and now it is not.

Should have added that I am trying to retrieve back-up images.
David

More information about how it isn't working and what it is doing would help.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
MacBook Pro (Retina 13-inch, Mid 2014)
Processor 3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB
Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
Thanks!

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Since upgrading to Yosemite I am getting frequently "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again"

Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
I am also noticing page load very slowly when this problem is not occurring.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I can't sync my 6th generation because i can't download the new itunes because i have an old mac?

I can't sync my 6th generation because i can't download the new itunes because i have an old mac?

bonniebab wrote:
I can't sync my 6th generation because i can't download the new itunes because i have an old mac?
Yes.
From the box and the website:
System requirements
Mac computer with USB 2.0 port, Mac OS X v10.5.8 or later, and iTunes 10 or later4"
http://www.apple.com/ipodnano/specs.html
You would need to update your Mac OS.

Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

Safari keeps giving and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
It only seams to have a problem with https sites.
Any help would be appreciated

The "s" in "https" indicates the site is a secure server--usually a site that will require a password. Connections to secure servers can be blocked by parental controls. Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)? If so, check the settings to make sure they will allow the connection.

How can I insert, modify and delete entries on my table control?

Hi,
I already have build a table control. Now I want to make manipulations on it. Therefore I have created 3 buttons, insert, modify and delete. But how can I get actions on table control.
This is my code for the internal table:
BEGIN OF its OCCURS 0,
mark TYPE C VALUE ' ',
artikel_nr TYPE ZARTIKEL-ARTIKEL_NR,
artikel_typ TYPE ZARTIKEL-TYPE,
bezeichnung TYPE ZARTIKEL-BEZEICHNUNG,
preis TYPE ZARTIKEL-PREIS,
mwst TYPE ZARTIKEL-MWST,
END OF its.
and this is the code which i wanted to delete a row in my table control:
WHEN 'DELETE'.
LOOP AT its WHERE mark EQ 'X'.
DELETE its WHERE mark = 'X'.
MOVE its TO ZARTIKEL.
ENDLOOP.
ENDCASE.
ENDMODULE:
and my PBO and PAI:
PROCESS BEFORE OUTPUT.
LOOP AT its INTO ZARTIKEL WITH CONTROL ARTIKEL.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE EXIT.
LOOP AT its.
MODULE V1.
ENDLOOP.
MODULE user_command_1060.
But if I now open my table control and mark the line that I wanted to delete, nothing happens, not on my internal table and the data even not deleted on my table ZARTIKEL. Have you an idea what I did wrong??

Hi,
In the attributes of table control take the SELCOL as wa_zekpo-flag
And in the internal table and work area add a field as flag(1) TYPE c
Refer:
At screen logic:-
PROCESS BEFORE OUTPUT.
MODULE status_8002.
LOOP WITH CONTROL po_tab.
    MODULE pass_data.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_8002.
LOOP WITH CONTROL po_tab.
    MODULE modify_data.
ENDLOOP.
MODULE function.
In PBO,
MODULE status_8002 OUTPUT.
SET PF-STATUS 'ZTG_SELTB'.
DATA : line_count TYPE i.
DESCRIBE TABLE it_ekpo
LINES line_count.
po_tab-lines = line_count + 5.
ENDMODULE.                 " STATUS_8002 OUTPUT
*&      Module PASS_DATA OUTPUT
MODULE pass_data OUTPUT.
READ TABLE it_ekpo into wa_ekpo INDEX po_tab-current_line.
ENDMODULE.                 " PASS_DATA OUTPUT
In PAI,
*&      Module USER_COMMAND_8002 INPUT
MODULE USER_COMMAND_8002 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'BACK'.
      LEAVE TO SCREEN 8001.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_8002 INPUT
*&      Module MODIFY_DATA INPUT
MODULE DISPLAY_DATA INPUT.
MODIFY IT_EKPO INDEX PO_TAB-CURRENT_LINE FROM WA_EKPO.
ENDMODULE.                 " MODIFY_DATA INPUT
*&      Module FUNCTION INPUT
MODULE FUNCTION INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'SELECT'. "<--select all records
      LOOP AT IT_EKPO INTO WA_EKPO.
        WA_EKPO-FLAG = 'X'.
        MODIFY IT_EKPO FROM WA_EKPO.
      ENDLOOP.
    WHEN 'DESEL'. "<--deselect all records
      LOOP AT IT_EKPO INTO WA_EKPO.
        WA_EKPO-FLAG = ' '.
        MODIFY IT_EKPO FROM WA_EKPO.
      ENDLOOP.
    WHEN 'DELETE'.
      DELETE FROM it_ekpo WHERE flag = 'X'.
ENDCASE.
ENDMODULE.                 " FUNCTION INPUT
Regards,
Tarun

How can i modify or delete desktop files and folders in Mac OS 10.6.8 ?

i have Macbook pro running on Mac OS X, Snow Leopard ver. 10.6.8 . I am not able to delete rename and modify my desktop folder and files. even through the admin account and all previleges i cant move them to Thrash. as i try to delete them it asks for password and then no action takes place. i have even used repair permissions from disk utility, used the terminal window method but nothing happened. the "get info " shows read and write permision but still i cannot even rename them there.. can anyone please help me ?

Is the Desktop folder inside the Users -> Yourname folder with the same contents of your Desktop? If it isn't, then you've moved the Desktop folder to a place that can't be accessed by the account called Yourname.

HT201628 Okay I tried this but I can't put iTunes in the trash because it's "required by mac OS X".. What do I do?

iTunes doesn't recognize my iPhone... I just want to sync my phone...

Launch Activity Monitor in Utilities, select All Processes and see if you can see your application listed. Select it and click on the big red 'quit process' button at the top. Now try to delete the app.

Can't send cntrl-alt-delete to start PC remotely via Mac

I am using Symantec PC Anywhere software and even when I try the Mac equivalent of cntl-alt-delete the PC I am trying to connect to doesn't recognize the command. (Once I am in, the connection works fine). Any suggestions? Is there a better program out there to connect to a PC remotely via Mac?

I am using Symantec PC Anywhere software
Are you running Windows on the Mac (via Boot Camp, or Parallels Desktop or VMware Fusion) or is pcAnywhere CrossPlatform Remote (or something similar) used under Mac OS X?
the Mac equivalent of cntl-alt-delete
Just guessing here (I do not know whether the command in question will work at all when used via said remote control program). Would it be correct to assume that you have noticed the difference between the delete keys on a PC and a Mac (the delete key on a Mac is the same as backspace on a PC). You may want to have a look at this article (and perhaps this one).
Is there a better program out there to connect to a PC remotely via Mac?
When working under Mac OS X, could something like this (or maybe one of the programs here) possibly be of interest?
Jan

"Safari" can't be modified or deleted because it's required by Mac OS X.

Similar Messages

Maybe you are looking for