"Safari can't open the page because it can't find the server"

I just bought my iPhone. The first time I attempted to log onto my home wireless network (US Robotics Wireless Router) the iPhone performed perfectly. However, the next time I attempted to logon and surf it gave me the "Safari can't open the page because it can't find the server" error message. I tried a variety of things which didn't work. I called the Apple Tech Support. Turning off the router and rebooting it was the only thing that worked. I thought my problem was resolved because after cycling the router the iPhone worked great once again. But . . . later the same day I attempted to connect to the router and the same thing happened and I got the error message. I attempted to power cycle the router just like before but this time it did not work! Help! Bad router? Wrong settings on router or iPhone?

Do you have other wireless devices connected to this same router? Do they work?
I really can't help you much but to say that when my router exhibited this issue it was accross the board (all notebooks would connect immediately following a router restart, but would loss connectivity until I rebooted the router again). In my case the only solution that was permanent was to replace the router.
You may also try restarting the phone and the router, setup security - WEP - (or disable security) on the router and phone, and/or try a different wi-fi channel (may actually help).

Similar Messages

  • Safari is not able to open this page because it can not find the server.

    I too need help with this problem with my Ipod touch. Currently, I am in the Ukraine, go to a wifi cafe, access the wifi and get a clear powerful signal. Then I try to load the Google page, any page from my bookmark or write the web address in and I receive the same message; "Safari can not open this page because it can not find the server." Something is wrong with my settings and I tried to reset the options but it does not work. Can anyone help me with this problem? Thanks!!

    Hello and Welcome to Apple Discussions. 
    The 169.254.xxx.xxx address indicates that there is a problem with DHCP server in your BT Digital Hub (Home hub?) because the iPod is taking a default IP rather than been given a suitable one. At the moment the iPod is not even in the same subnet as the router so it's no wonder that Safari can't find the Internet.
    Ensure that the DHCP server is on and that you have an IP-address pool sufficiently large to serve all the devices you have. I'd expect it to be 192.168.1.1 to 192.168.1.253. If you have FON enabled you certainly need that wider range as other people may be using your router too.
    mrtotes

  • Safari cant open the page because its not connected to the internet

    iPhone 3g connected to my wifi at home just fine for first 3 weeks, now wont connect and getting error message "safari cant open the page because its not connected to the internet" Signal strength is excellent, other wireless devices are connecting fine.
    Ive reset network settings, modem and router but still getting error messages.

    Hey man, I have this same problem and it all started with 2.0.2. This is the worst update Apple could have given us. I love Apple products, and I loved my iPhone 3G until this update. I think 2.0.2 has caused more bugs than it claims to have fixed. Safari doesn't work anymore (3G or WI-FI) and I can barely pick up 3G unless I'm outside or near a window (whereas before 2.0.2 I could get 3G even in the underground tunnels of my university campus). My iPhone is no fun anymore and actually pointless, I might as well revert back to my original RAZR v.3, at least that thing worked as it was designed to.
    I hope Apple issues a new update that just cancels out 2.0.2 and reverts back to 2.0.1....that one worked absolutely fine (at least I got no crashes of any kind with that version).

  • Safari can not open this page because this address is invalid, Safari can not open this page because this address is invalid

    SAfari can not open this page because this address is invalid

    I have the same problem and this is what I get, http://,k/

  • Safari could not open this page because the server stopped responding

    Since upgrading to 4.2 I get this message a lot even though the page loads anyway:
    "safari could not open this page because the server stopped responding"

    Have you Checked your firewall setting(of both windows and of the Anti Virus).
    I was Having the same Problem, and tried everything from the Internet, then i realised that firewall can mess things up and so i immediately TURNED OFF the firewall and restarted my Network and my Ipod ....THE INTERNET WORKED
    i am using win vista and McAfee.
    want to add few more things:
    1> adjusting brightness has nothing to do with Networking.
    2> Multiplayer/online games also get into problem due to antivirus firewall(AVG anitvirus specially.....Disabling firewall or setting it to permit the Device/program to access Internet WORKS)
    3>to know if the problem is with the Idevice or with the System, try connecting other devices to that netwrk, if non of them connect then its the problem with the System/Network/OS and not with the Device........Resetting you Idevice again and again will not Solve the problem.
    Happy Idevicing

  • What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

    what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

    My 2nd gen works fine with WPA2 and AES encryption.
    You may need to go back and start over.  Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

  • Can't open web page because too many redirects

    Get the message Can"t open web page because too many redirects

    Try clearing Safari and restart the iPad.
    Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I cannot download software (message: safari can't open specified page). What can i do?

    I cannot download software (message: safari can't open specified page). What can i do?

    From the menu bar, select
     ▹ System Preferences... ▹ Network ▹ Advanced... ▹ DNS
    Under DNS Servers you should have one or more numerical addresses, such as “192.168.1.1” or “10.0.0.1”. What are those addresses?

  • HT201210 i want to make restore and update to my phone(3gs) and don't do it never because write "restore can't be finished because the  i-phone device don't found" !!!!?????i can't open my phone because it has at screen the icon (who must connect the devi

    i want to make restore and update to my phone(3gs) and don't do it never because write "restore can't be finished because the  i-phone device don't found" !!!!?????i can't open my phone because it has at screen the icon (who must connect the device withpc

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Safari can't open any page. Nor can Software update.

    Hi,
    trying to connect but get the following message, "Safari can’t open the page “http:” because it could not connect to the server “”
    I am able to connect with mail and firefox.
    Can't connect with software update.
    Does anybody know why?
    Thank you.

    DNS server codes may help.
    Go to the Apple Menu>System Preferences>Network panel
    -Location - set up a personal location by clicking on the location drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
    -Next, click on the "Show" drop down menu and select Network Port Configurations. Only Ethernet or Airport ought to be checked (whichever one you use). Move it to the top of the list (you can drag it). Select "apply". Everything else ought to be unchecked unless you use a Bluetooth device.
    -Back to the "Show" menu, select either "Ethernet" or "Airport" (whichever applies to you). Click on the TCP panel. There, if you live outside the US enter 208.67.222.220 and 208.67.220.222 (separate lines) in the DNS servers box - these are Opensource DNS codes. and select "apply". If you live in the US use Verizon's 4.2.2.1 and 4.2.2.2 public codes instead of the OpenDNS codes.

  • I can not open my itune because i did not complete the agreement

    I can't open the window itunes, because I did not completed the filling the terms & condition. I don't have Credit Card No. like Visa card to complete all information.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

  • A copy of Firefox is already open. Only one copy of Firefox can be open at a time. I cannot find the open one. was having some problems. deleted and trying to re-install. I get this message each time

    Some web pages did not load correctly. (on Imac). Deleted Firefox and moved Profile to another drive to backup.
    Downloaded new Firefox. When I try to install, I keep getting this message-"A copy of Firefox is already open. Only one copy of Firefox can be open at a time."
    I went in and searched for all occurrences of Firefox or Mozilla and deleted.
    It will still not load.

    I cannot get Firefox to run now. I backed up my Profile to another drive. Cannot create a new one as Firefox will not run. It says there is another copy running. However, I have deleted all Firefox and Mozilla files and downloaded new. When I try to run it, I get the message to close Firefox as two cannot run at once.
    I did create a new Mac account logon and can run Firefox there, so something in the other account is showing Firefox is running.
    I also checked in ACTIVITY MONITOR and in SETUP and there is no Firefox or Mozilla running.
    So, where can this bug be hiding????

  • Windows Photo Viewer can't open this picture because you don't have the correct permissions to access the file location.

    Hey, 
    So I recently bought a desktop with Windows 8 on it (loving it so far!) and I used Easy Transfer/an external hardrive to get my files from my laptop (which runs windows 7) onto here, but now all the music, pictures, etc. I can not access, not even view/hear
    because it seems I don't have the proper permissions. Help please?
    Thanks!

    Thanks for sharing the resolution.
    Niki Han
    TechNet Community Support

  • Can't open certain pages.

    I just got an iMac and have began to use Safari. I really like it.. but oddly, I can't open certain pages that I can on other browsers. (tested this).
    xbox.com - log in (or any of the Windows Live ID pages) ex: https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1342238079&rver=6.2.6 289.0&wp=MBI&wreply=https:%2F%2Flive.xbox.com:443%2Fxweb%2Flive%2Fpassport%2Fset Cookies.ashx%3Frru%3Dhttps%253a%252f%252flive.xbox.com%252fen-US%252fAccount%252 fSignin%253freturnUrl%253dhttp%25253a%25252f%25252fwww.xbox.com%25252fen-US%2525 2f&lc=1033&id=66262&cbcxt=0
    OR
    Any of the mlb.com gameday pages, such as ex: http://mlb.mlb.com/mlb/gameday/index.jsp?gid=2012_07_13_arimlb_chnmlb_1&mode=wra p
    I don't know what could cause this. The iMac is brand new, and I am not running any programs/scripts.
    Help?

    On the xbox log in, I get redirected to the link I provided which just shows a blank white screen with the Microsoft Inc. in green at the top of the URL bar. I get redirected after going to xbox.com -> sign in (at the top right). Cannot understand why.
    For mlb.com, I only load the banner in 'gameday', opposed to the reviews, previews, box score, etc.
    Makes no sense because on this same Mac, Chrome and Firefox can load these pages.

  • When I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet.  How can this be and how do I fix it?

    when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet.  How can this be and how do I fix it?

    Does the iPod connect to other networks?
    Do other device connect?
    Did the iPod connect to this network before?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • How to generate a project report for a BPM project in Oracle Jdeveloper 11g

    Hi, Till Oracle 10g we can generate a project report by right clicking on project name in BPM studio project navigator. Is this facility available with Jdeveloper 11g for BPM project as I am not able to generate the report. If this is possible than p

  • Monitor status Green buy in details tab reconstruction process is in red

    Hi, I am facing an issue with RSMO. It is master data load trough PSA. Some records are marked as error in PSA, while updating data to data target trough info package correct records were uploaded into target, error records not uploaded, but QM Statu

  • Need to delete /usr/bin without using terminal

    In a bit of a bind. All how-tos detailing how to delete or alter the /usr/bin file involve terminal, but terminal won't work b/c of this error login: PAM Error (line 396): System error login: Could not determine audit condition [Process completed] I

  • Urgent:How to get the Sqltext for Oracle Sumbitted Jobs in 10g

    Dear All, Could you help me out in sorting the below problem. I use to get the current running sql's with following below query in 9i. SELECT A.SID,B.HASH_VALUE, OSUSER, USERNAME, SQL_TEXT FROM V$SESSION A, V$SQLTEXT B WHERE B.HASH_VALUE = A.SQL_HASH

  • Urgent  lightroom trial

    Does anyone know if the trial version has a time out on printing, working fine this morning then it stopped allowing printing saying file info is not available!! I need it working for tonight!! Help thanks N