Safari can't play QT stream files. Firefox can. Network config?

I posted this problem on the QT discussion but looking into it, it may be a networking problem. This Apple trouble shooting page:
http://www.apple.com/quicktime/troubleshooting/
does not display the QT logo in Safari but does in Firefox. All SW is at it's latest levels. The page says if the QT logo doesn't display "there may be a problem with the way your network is configured."
Currently I'm using a hardwire connection to a Siemens switch which goes to an AT&T Motorola DSL modem. Anyone know what changes to my modem might make QT streaming on Safari work?
FWIW, I can play streaming files over the internet in Firefox and directly using QT X and QT Pro players.
TIA

Epilog Redux:
I deleted the following files from ~/Library/Preferences and rebooted. The same content that was playing 56K version is now playing the 256k version. I have no idea if anything else is broken. YMMV
com.apple.quicktimeplayer.plist
QuickTime Preferences
com.apple.QuickTime Player.plist

Similar Messages

Safari won't play all media files.

As the title says I can't play all media files on different web sites. Web sites like SoundCloud and YouTube gives a message about Flash blocker browser setting/plugin error etc. Some files can be played and some can't but this matter only concerns video and audio files. When I go to 'Help -> Installed Plug-ins' there's a '(protected)' text in the 'QuickTime plug-in' list right after 'AAC Audio - m4p' and 'Video - m4v'. I think there's the problem but how can I edit these settings?
This problem came up after downloading the version of Adobe Flash Player. I have installed the latest Adobe Flash Player again and tried to reboot my Mac but it's not helping. I also found doubles of Flash Player from 'Macintosh HD -> Library -> Internet Plug-Ins' folder and deleted older file but neither that didn't help.
This is the QuickTime plug-in list copied from Safari's 'Installed Plug-ins' page:
QuickTime Plug-in 7.7.1
QuickTime-liitännäisen avulla voit katsella monenlaista verkkosivuilla olevaa multimediasisältöä. Lisätietoja saat QuickTimen verkkosivustolta. — tiedostosta ”QuickTime Plugin.plugin”.
application/sdp
SDP stream descriptor
sdp
application/x-mpeg
AMC media
amc
application/x-rtsp
RTSP stream descriptor
rtsp,rts
application/x-sdp
SDP stream descriptor
sdp
audio/3gpp
3GPP media
3gp,3gpp
audio/3gpp2
3GPP2 media
3g2,3gp2
audio/aac
AAC audio
aac,adts
audio/ac3
AC3 audio
ac3
audio/aiff
AIFF audio
aiff,aif,aifc,cdda
audio/amr
AMR audio
amr
audio/basic
uLaw/AU audio
au,snd,ulw
audio/mid
MIDI
mid,midi,smf,kar
audio/midi
MIDI
mid,midi,smf,kar
audio/mp3
MP3 audio
mp3,swa
audio/mp4
MPEG-4 media
mp4
audio/mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/mpeg3
MP3 audio
mp3,swa
audio/vnd.qcelp
QUALCOMM PureVoice audio
qcp,qcp
audio/wav
WAVE audio
wav,bwf
audio/x-aac
AAC audio
aac,adts
audio/x-ac3
AC3 audio
ac3
audio/x-aiff
AIFF audio
aiff,aif,aifc,cdda
audio/x-caf
CAF audio
caf
audio/x-gsm
GSM audio
gsm
audio/x-m4a
AAC audio
m4a
audio/x-m4b
AAC audio book
m4b
audio/x-m4p
AAC audio (protected)
m4p
audio/x-midi
MIDI
mid,midi,smf,kar
audio/x-mp3
MP3 audio
mp3,swa
audio/x-mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-mpeg3
MP3 audio
mp3,swa
audio/x-wav
WAVE audio
wav,bwf
image/jp2
JPEG2000 image
jp2
image/jpeg2000
JPEG2000 image
jp2
image/jpeg2000-image
JPEG2000 image
jp2
image/pict
PICT image
pict,pic,pct
image/png
PNG image
png
image/tiff
TIFF image
tif,tiff
image/x-bmp
BMP image
bmp,dib
image/x-jpeg2000-image
JPEG2000 image
jp2
image/x-macpaint
MacPaint image
pntg,pnt,mac
image/x-pict
PICT image
pict,pic,pct
image/x-png
PNG image
png
image/x-quicktime
QuickTime image
qtif,qti
image/x-sgi
SGI image
sgi,rgb
image/x-targa
TGA image
targa,tga
image/x-tiff
TIFF image
tif,tiff
video/3gpp
3GPP media
3gp,3gpp
video/3gpp2
3GPP2 media
3g2,3gp2
video/avi
Video For Windows (AVI)
avi,vfw
video/flc
AutoDesk Animator (FLC)
flc,fli,cel
video/mp4
MPEG-4 media
mp4
video/mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
video/msvideo
Video For Windows (AVI)
avi,vfw
video/quicktime
QuickTime Movie
mov,qt,mqv
video/sd-video
SD video
sdv
video/x-m4v
Video (protected)
m4v
video/x-mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
video/x-msvideo
Video For Windows (AVI)
avi,vfw
Thank You!

Thanks for your reply baltwo!
It didn't even skipped my mind to look for an answer from System Preferences. Nevertheless it didn't help. When I open 'Trusted Location Settings' it just gives me blank window..
Help still needed.

Can't Play VCD *.DAT files in QT 6.5.3

I can't play vcd *.dat files in QT 6.5.3 (OSX 10.2.8) But i can play them using QT 6.0.2 in OS9.2.2 What do i need to do to play them in OSX using QT 6.5.3? Thx for the help...Dave
Mac G4 AGP, PB G3 Bronze, PPC G3 Biege Mac OS X (10.2.x)

Yes, tried that.... QuickTime/open movie/go to vcd/MPEGAV/AVSEQ01.DAT/choose....I then get error message 'Couldn't open file AVSEQ01.DAT because there was an input/output error' So then i tried oening from the desktop.
Is this a commercial VCD or a Toast burn? Asking because I know mine was made by Toast back in OS 9 when the MPEG-1 extension was included with Toast. If so, am wondering if you have an OS X compatible version of Toast installed. I have the latest version of Toast installed and was thinking it might include some component that is allowing me to open the AVSEQ01.DAT file without error. (I get the error when I attempt to open via the OS 9 VCD script in the CDI folder since I no longer have access to "Classic" mode.)
VCD/MPEGAV/AVSEQ01.DAT/double click...I then get error message...'Chinese Input Method Plug-in Converter' Open file error.
Chinese Input Method Plug-In Converter appears to convert input text to Chinese "graphic equivalents" contained in .DAT extension files. (Plug-in probably works as some sort of a text-to-graphic buffer.) It may simply be selecting this as an "application/utility of opportunity" here and generates an error when it reaches the end of the "look-up table" without finding a valid match.
In any case, I take it your VCD does not contain a QT reference movie (.MOV) that points to the AVSEQ01.DAT file as the movie resource.

How can I play MPEG-4 files in Premier Elements? It plays in iTunes but I only see video in Element

how can I play MPEG-4 files in Premier Elements? It plays in iTunes but I only see video in Elements

LGSh
Lots of questions, lots of answers needed as mentioned by Hunt. But please include what version of Premiere Elements that you are using when you reply.
How are you importing these file into your Premiere Elements project?
After you drag your file to the Timeline, do you see both an video and audio component (on Video 1/Audio 1) or is there nothing on the Audio 1 track? If you can see a wave form or file on Audio 1, have you checked all the program's volume settings including Edit Menu/Preferences/Audio Hardware and the ASIO settings?
More later.
Please do not hesitate to ask if you need clarification on anything written.
Thank you.
ATR

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.

Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
1) You can add component support so that QT can play the files natively or
2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use.

Premiere pro Encoded file having m4v & .wav & m4v.xmpse files how can i play this video file?

Hello Guys,
I am a beginner in Premiere ,just started learning.Created a project and wanted the finished project file as a bluray format,after 14 hours adobe premiere pro(not encore) created all the above three files,what to do next? how can i play the video file?
Kind advise pls

Dear Mr,Hunt,
You made my day....i felt its more than special a christmas day,thank's a Trillion..downloaded the MKV MERGE GUI ,within ten minutes job done!!!!!!!!!
All my 16 hour rendering job is saved.End of the day i learned something new toooo.
I would like to ask you a question which is not connected to this topic,i asked this question before in windows 7 forum but till date no body solved!!
I am having few avi video files which having (avi.avi) extension i couldn't figure out how its occured(they all video files captured from samsung galaxy note,and appeared noraml avi files but became avi.avi i tried removing one extension,eventhough it says having one extension when you look in to the properties of that file you can see avi.avi ,the problem is eventhough it playable in vlc sometime,when i try to import to premiere pro -it says the file is corrupted.
any idea??

Why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

R Cubss,
You might want to read down this thread. There are a lot of tips-n-tricks, and maybe one will be right for you.
http://www.adobeforums.com/webx/.59b6565c/43
Good luck,
Hunt

HT204406 iTunes Match - can't play because original file can't be found

Hi, I've uploaded 600+ tracks to iTunes Match and since deleted the original files from my computer - when I go to play them 'via the cloud' only a handful of songs will play, the rest say 'can't play because original file can't be found!
I assumed the purpose of iTunes Match was to create a copy of all your tracks so you could access them from anywhere.
Hoping someone can help/offer advice?
Cheers, Lee.

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool have moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you might be able to reconnect iTunes to them using my FindTracks script.
tt2

I have upload my iphone, but i can't back up my file. someone can help me???

I have upload my iphone, but i can't back up my file. someone can help me???

You can't "accidentally" put a passcode on any iPhone...its a multi-step process. Further, restoring an iPhone will remove the passcode, as the passcode is not included in an iPhone backup.
Are you sure you're talking about the phone passcode & not something else...like the "Restrictions" passcode?

IE can access my Google calendar, but Firefox can't. Any ideas?

IE can access my Google calendar, but Firefox can't. Any ideas?

How far do you get trying to log in?
1. Will it not let you enter your username and password?
2. Does it reject your known-valid username and password?
2.1 Did you notice that it tends to uppercase the first letter of the username (possibly causing a mismatch)?
2.2 Do you get the generic red "Please enter a correct username and/or password." message or something more specific?
3. Does it accept them and take you somewhere useless or broken?

How can I play embedded MP3 files in Firefox 19?

I am on a site where I can buy MP3 files. There is a preview of each song. When I click the preview, nothing happens.
If I open IE and do the same thing, I hear the song.
When I return to Firefox, I can then play that same song in Firefox. I can only do this if I open the link in IE first.
I have the Quicktime plugin installed and enabled. In Firefox options, it shows to open MP3 links using the Quicktime plugin

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can delete the mimeTypes.rdf file in the Firefox Profile Folder to reset all file actions.
*http://kb.mozillazine.org/mimeTypes.rdf
*http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder

[SOLVED] can't play any multimedia file, fresh install msi wind

hi! i have now a pretty much working system i installed mplayer and alsa, and have a working xorg, i configured alsa with alsaconf and it says that the card was found and i can now change levels with alsamixer the thing is that everytime a want to play a media file, say an mp3, avi, mpg, every kind of media file, mplayer says "Starting playback..." and the do nothing, i tryed vlc too, it shows the position bar like its playing but nothiing happends and then if you want to close it the only way to stop them is via htop, not even a sudo killall mplayer/vlc do the trick, dont know if its a misconfiguration or a alsa/kernel bug, and i think that i have so less controls in alsamixer/amixer, because i don't have a mic audio level for example, i only have a "mono" Master and PC Speaker
thanks for read!
my xorg, amixer/mplayer/vlc output:
my xorg:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# InputDevice "SynapticsTouchpad" "SendCoreEvents"
# InputDevice "USB Mouse" "CorePointer"
# InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
# Option "AllowMouseOpenFail" "true"
# Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "ddc"
Load "dbe"
# Load "xtrap"
Load "dri"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "record"
Load "extmod"
Load "freetype"
Load "synaptics"
EndSection
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "keyboard"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "es"
#EndSection
#Section "InputDevice"
# Identifier "USB Mouse"
# Driver "mouse"
# Option "Device" "/dev/input/mice"
# Option "SendCoreEvents" "true"
# Option "Protocol" "IMPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Buttons" "5"
#EndSection
#Section "InputDevice"
# Identifier "Touchpad"
# Driver "synaptics"
# Option "Device" "/dev/input/mouse0"
# Option "Protocol" "auto-dev"
# Option "LeftEdge" "130"
# Option "RightEdge" "840"
# Option "TopEdge" "130"
# Option "BottomEdge" "640"
# Option "FingerLow" "7"
# Option "FingerHigh" "8"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "110"
# Option "EmulateMidButtonTime" "75"
# Option "VertScrollDelta" "20"
# Option "HorizScrollDelta" "20"
# Option "MinSpeed" "0.25"
# Option "MaxSpeed" "0.50"
# Option "AccelFactor" "0.010"
# Option "EdgeMotionMinSpeed" "200"
# Option "EdgeMotionMaxSpeed" "200"
# Option "UpDownScrolling" "1"
# Option "CircularScrolling" "1"
# Option "CircScrollDelta" "0.1"
# Option "CircScrollTrigger" "2"
# Option "SHMConfig" "on"
# Option "Emulate3Buttons" "on"
# Option "VertTwoFingerScroll" "1"
# Option "HorizTwoFingerScroll" "1"
#EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # 
#Option "CacheLines" # 
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # 
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GME Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1680x1050" "1024x600" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1680x1050" "1024x600" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1024x600" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
amixer:
[aleyscha@aleyscha 63 ~ 11:15]$ amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 21 [8%] [-7.69dB] [on]
Front Right: Playback 21 [8%] [-7.69dB] [on]
Simple mixer control 'PC Speaker',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'BaseFRQ',0
Capabilities: penum
Items: '18643' '37286'
Item0: '18643'
mplayer:
MPlayer dev-SVN-rUNKNOWN-4.3.2 (C) 2000-2009 MPlayer Team
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (Family: 6, Model: 28, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
137 audio & 292 video codecs
Playing doorbell1.mp3.
libavformat file format detected.
[lavf] Audio stream found, -aid 0
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 22050 Hz, 2 ch, s16le, 128.0 kbit/18.14% (ratio: 16000->88200)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [alsa] 22050Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
vlc:
[aleyscha@aleyscha 71 Music 11:24]$ vlc Krishna_Das_-_Jaya_Jagatambe_$Pilgrim_Heart$.mp3
VLC media player 0.9.8a Grishenko
[00000001] main libvlc debug: VLC media player - version 0.9.8a Grishenko - (c) 1996-2008 the VideoLAN team
[00000001] main libvlc debug: libvlc was configured with ./configure '--prefix=/usr' '--enable-dvdread' '--enable-dvdnav' '--enable-madi' '--enable-ffmpeg' '--disable-rpath' '--enable-qt4' '--enable-faad' '--enable-alsa' '--enable-skins2' '--enable-dvb' '--enable-dmo' '--with-ffmpeg-faac' '--with-ffmpeg-vorbis' '--with-ffmpeg-dts' '--with-ffmpeg-ogg' '--with-ffmpeg-theora' '--enable-v4l' '--enable-theora' '--enable-flac' '--enable-snapshot' '--enable-hal' '--enable-dbus' '--enable-ogg' '--enable-dbus-control' '--enable-shared' '--enable-nls' '--enable-lirc' '--enable-shout' '--enable-pvr' '--enable-release' '--program-suffix=' '--with-dv-raw1394=/usr/include/libraw1394' '--enable-loader' '--enable-live555' '--with-live555-tree=/usr/lib/live-media' 'CFLAGS=-march=i686 -mtune=generic -O2 -pipe' 'CXXFLAGS=-march=i686 -mtune=generic -O2 -pipe' 'PKG_CONFIG_PATH=/usr/lib/pkgconfig'
[00000001] main libvlc debug: translation test: code is "C"
[00000001] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Last edited by leo2501 (2009-01-25 23:53:47)

A few days ago, x264 was updated through pacman. Ever since that update I have been unable to watch video over the web. VLC won't generate sound. Flash video freezes firefox and opera. Here are some links to threads about it (also a link to the bug page where it has been assigned for a fix.). Maybe this is what is causing your problem as well??
http://bbs.archlinux.org/viewtopic.php?id=63509
http://bbs.archlinux.org/viewtopic.php?id=63461
http://bugs.archlinux.org/task/12872

Safari does not play movie stream

Does anyone have any idea why Safari does not play the movies on the web page
http://www.3sat.de/delta/
You can find them under "Web-TV" (you have to click a little bit until a small window opens which has a button called "video starten" at the bottom right).
I believe the movies are reaplayer video streams.
Needless to say that the movies work just fine in Firefox ...
Any ideas, hints, pointers will be appreciated.
Best regards,
Gabriel.

Hello Gabriel,
The video does play for me in a popup window via realplayer.
it also has the option to open in WMP.
Web TV
It will not play in realplayer itself, when i click for it to play in real Player this
Server alert
Unable to locate server. This server does not have a DNS entry. Please check the server name in the URL and try again.
rtsp://real.mdcs.dtag.de/zdf/3sat/delta/delta060406_zukunft3_16zu9h.rm
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.3sat.de%2Fdelta%2F
Safari is also picky about code, this one is not the poorest & it does work for me so it seems something is interfering in your user account or computer,.
Have you tried the site in a test account if not that would be telling.
Let us know if it works there.
Regards,
Eme'~[)
Helpful.. Solved.....Why Award points?

How can I play an audio file without the whole screen going black?

When I play the mp3 file on IE it opens in a small screen so I can still see the web page.
On Firefox the whole screen is taken up with the sound file being played.
Can this be changed?

Is that file played in a tab in the current window or in a separate pop-up window?
Are you allowing pop-up to modify the window size (dom.disable_window_move_resize = false)?
*http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
You can try set the Boolean pref media.windows-media-foundation.enabled to false on the about:config page to disable the built-in HTML5 media player.
*http://kb.mozillazine.org/about:config

Safari will not play live stream

Hi,
I have been wanting to watch the live stream on abc7.com of the wildfires but am unable to.
I have windows media player installed but I just get a blank area were it should be playing,
what do I need?
Thanks

Ecnal, if it is a non-DRM .wmv file, you can download and install Flip4Mac Windows Media Components for QuickTime.

Safari can't play QT stream files. Firefox can. Network config?

Similar Messages

Maybe you are looking for