Safari changes url to local IP

When away from home I can reach my server via a xyz.dnsalias.net dynamic address. For sometimes now Safari on my iPhone 3g "translates" this into a 192.168.x.y address that is the local IP of my server, which I sometimes connect to locally with my iPhone via wifi. As a result I can no longer access this site from my iPhone when on 3G or edge or wifi spot away from home.
How can this be fixed ?
Thanks

Find your real public IP and use that instead to setup with.
Note odds are you also have to adjust your router to allow port forwarding to the private IP for connections on the port used by the server.

Similar Messages

  • Safari changes url

    Safari is changing the entered URL by itself. Not sure why this happens, but sometimes when entering a certain web address Safari changes it by itself into something like Google or Ebay. Once this happens you cannot go to the desired web address for a couple of hours: Safari keeps redirecting to the same Google or Ebay site. Often the next the day the problem is resolved and everything works fine again. Does anybody have a clue what might be going on here?

    Most likely your ISP is re directing your browser.
    Use OpenDNS for better speed, security, it's free and no more re directs.
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Click +
    Enter these numbers exactly as you see them here.
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK.
    More about OpenDNS here.
    http://www.opendns.com/
    Topic : Manually provided DNS server addresses are higher priority than DHCP's

  • How to change url of bsp page

    Hi experts
    I have created a BSP application , In login pafe i want to change  URL which we use for TEST .
    Or can can i redirect to another url , when TEST the page.
    Thanks & Regards
    Prashant Gupta

    Hi Prashant,
    Re-directing to another URL on load of page is a very simple piece of HTML code.Put this on the layout of page from where you want to re-direct to the other URL.
    <html>
    <head>
      <metas http-equiv="refresh" content="0;url=http://sdn.sap.com">
    </head>
    </html>
    Here the important line is the 3rd line which begins with "<metas". The operation is "refresh" which means to "refresh" the current page with the information that follows. The content begins with a zero, which is the number of seconds to wait, and then the URL that you should be taken to.
    So the above code would re-direct you to the http://sdn.sap.com page as soon as you log in.
    Hope this helps!
    PS : meta changed to metas to allow adding of the code.
    Regards,
    Saurabh

  • Safari copy url button doesn't work

    I just upgraded from an ipad2 to an iPad air 2. Before, if I wanted to copy and paste a url I'd use the copy button. Now,on the new iPad air 2, the copy button just wipes out whatever I've previously copied, and doesn't copy the url.

    You tap and hold down in the URL field until you get the option to select all. Then you choose the option to select all. An option to Copy appears and you select that and then you should be able to paste that URL into a text field.
    Safari copy url button doesn't work
    I Realize that you must know the steps but I am just double checking. If that is not working for you, and you are not having copy and paste issues elsewhere in other apps, I would try clearing Safari, force close it and then reset your iPad.
    Go to Settings>Safari>Clear History and Website Data
    Now force close Safari. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Change clock to local time

    How to change clock to local time

    Settings> general> date and time > set automatically> on.

  • Firefox 3.6.14 shows URl but displays nothing, changing URLs crashes it

    After Firefox 3.6.14 installed itself on my Mac, I have not been able to see any page and if I change URLs, it crashes. How can I get a back copy of Firefox?

    After Firefox 3.6.14 installed itself on my Mac, I have not been able to see any page and if I change URLs, it crashes. How can I get a back copy of Firefox?

  • Mobile Safari changes '#' from a link in Mail to '%'

    When I press a link from Mail that contains the '#' character, Safari changes it to a '%'. This causes grief as some sites don't load as expected.

    Did you set Firefox as default browser at Prefences -> Default Browser of Safari side as well?
    -- kaz-k

  • Preferences in safari changes

    Why does my preferences for safari changes every time I start it?

    It might just be registering the last time you opened Safari to be able to send relavent crash reports if there should happen to be a crash.  Note, unless you specifically ask it to send said crash information to Apple it won't.

  • Lost safari's url field

    I've just managed to lose safari's url field... click something and it's gone.
    Any ideas how to get it back again?

    Eme
    Thank you for replying to Lesley Olley question. I just had the same problem after a resent up date. I felt so stupid to realize it was such a simple task after spending 7 hours searching all my applications, utilities, folders and the hard drive for a missing component. Then downloading various utility repair and maintenance applications. Gosh, what a wasted day. I hope Lesley didn't do this. But that sad part is I went a week going through Yahoo web browser to get to every place I needed to go that wasn't already in my bookmarks.
    I did try using Internet Explorer but it ran so slowly (I'm on dial up) that even the extra time going through Yahoo was quicker then waiting for Internet Explorer to dial up the address. It is funny because on my XP computer dial up is actually pretty fast using Internet Explorer.
    Thank you very much.
    Lorraine

  • Changing the OS local time while the database is Up and Running

    Hi,
    Will there be any bad effect if I change the OS local time of my servers while the database and application is up and running?
    Why do I need to do this? because the database is RAC configured and I want to avoid "brain-split" because of discrepancies
    in the local time of DB Servers.
    NTP is not yet implemented so I am to adjust the time manually for each servers.
    BTW, I am using database 10gR2 (10.2.0.4) and EBS application (11.5.10.2). My nodes are running in Linux 4, 2.6.9-42ELsmp x86_64.
    Regards,
    Jay A

    But my very concern right now is if there will be negative effect on the data or timestamp in the datafiles of the database
    because I change the local time of the server while the database is running.Change time, that make time in database is changed. and you are changing time at milliseconds. you won't see affect.
    we should worry different time between servers more than time changing
    you can use ntpdate to query time different from server before.
    # ntpdate -q ntp.server.org
    http://linux.die.net/man/1/ntpdate

  • SG300 cant change the Link Local address for an IPv6 interface

    There seems to be no apparent way to change the Link Local address for an IPv6 interface
    If I create more than one interface they all appear to have the same Link Local address

    Never mind, I figured it out
    By adding a Link Local address to an interface, it overides the existing one on the interface

  • Change of 3u00BA Local Currency

    Hi all,
    I need to change the 3º Local Currency of one of my company codes. In 'Define Additional Local Currencies' I am not able to change the currency (only field which is not modifiable)which currently is our group currency and has to be changed to an index based currency.
    I would be grateful for any help.
    Thanks
    Claudia.

    Welcome to this forum!
    Change the currency type to 50.  Currency field will change automatically, provided you have specified Index based curr. in Transaction Code OY01 for the country of your company code.  But, is this a live system?  Be cautious of the repercussions before changing additional local currencies.  Think of all the existing accounting documents.

  • Safari changes my website request to random product sale sites.

    Every time I try to load http://www.retrievertraining.net/forums/, Safari changes the address to various other websites. This site is one I have used regularly for years on all my computers. The problem only exists on my imac. This is an example of one of the sites it sends me to http://www.apartmentfinder.com/search.aspx?ecid=PS%7CADM%7C21189S114209140
    I have tried dumping casche and resetting Safari to no avail. The site works fine on my other computers.
    Help

    Hi
    Since you said - the site works ok on other computers... and you've reset Safari, presumably including removing cookies?... I'd think it unlikely on that evidence, that the site has been hacked.
    Whilst hacks to websites do & will happen, and result in page redirects, or rogue/spammy pages being served up - if they're not gonna be noticed right away by the site owners, they do need to be either randomish, or meet some pre-determined criteria ( like say, if the visitor has come from google, and was searching for xyz's , and even then, perhaps the 'hacked' site might only redirect every one in ten requests )
    or yes, if the visitor has some identifier, like a cookie or 3rd party plugin, or is from a particular country or isp... something which would let 'em know to redirect your computer, and not mine. Or it might be a bookmark you use, with some extra code in, although the http://www.retrievertraining.net/forums/ link you gave, is fine, and works normally from here too.
    Have you checked to see what DNS the problem mac is using?

  • Changing URL for E_BUSINESS system

    Hi,
    how to change URL for E_BUSINESS system ? Should we only edit contexte .xml files and launch autoconfig? Which parameteres ?
    Many thanks.

    Hsawwan, thank you. I did this :
    to modify "s_login_page" and run AutoConfig. Make sure you have the latest AutoConfig patch applied (Patch 5985992 - TXK AUTOCONFIG ROLLUP PATCH Q (JUL/AUG 2007))
    Now it is OK for login page. But :
    1-when entering in E_BUSINESS or OAM it goes back to ancient URL ? Should we change some other parameters ?
    2-when loging in for example as sysadmin, first time it fails with this message :
    You have insufficient privileges for the current operation.
    we login again and it is ok , user can enter.
    Many thanks.

  • Does a Change in the Local, Cached Image of iDisk Item Get Backed Up w/TM?

    I use iDisk as a network drive for two Macs. If I make a change to a locally cached iDisk file, is that change captured by Time Machine?

    No. The iDisk is not looked at by TM.
    However, if the locally cached iDisk is disconnected and a "Previous local iDisk for AccountName.sparsebundle" is left on your Desktop it will get backed up by TM when it makes its next backup. Something to be aware of.
    Message was edited by: BarryXSharp

Maybe you are looking for