Safari constantly freezes and is slow. Just fix it Apple. Who do you think you are, Microsoft?

Safari constantly freezes and is incredably slow. I have tried every "fix" on the Internet. Nothing works. Just fix it Apple. Stop pretending it is not a problem.

*********** PROBLEMS FIXED ************
I have spent the last month trying to get my iPad 2 running like it did before 8.0 and 8.1. Finally chatted with Apple support for two hours trying many things. Then I followed their instructions to do a full factory reset, reinstalled all my apps, and recreated all of my email accounts.
Nothing, nothing, nothing worked! My iPad still runs crappy and web browsing (on any browser) was still tortuously slow and choppy.
Then I tried this..... I put the iPad on a shelf, went out and bought a Surface Pro 3. Now my tablet is running with lightning speed with an abundance of apps, and the user interface is performing great!
Bye Bye Apple.

Similar Messages

Safari constantly freezes to reload

When using Safari, it seems like it is constantly freezing up and loading and the cursor turns to the color wheel. Any suggestions?

Welcome to the forums!
Try some of this:
(First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit. Control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode)
Do you have enough RAM? Less than 1GB can cause slowness. Is your hard drive too full? Less than 15%, or 15GB, of free space can also cause slowness.
Adding DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.
(An explanation of why using Open DNS is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
Wikipedia also has an interesting article about Open DNS:
http://en.wikipedia.org/wiki/OpenDNS
Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
This is Apple's guidance on iPv6:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
Click on Apply Now and close the window.
Restart Safari, and repair permissions.
If that didn't do it, then try this as well:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
More useful information here:
http://guides.macrumors.com/SpeedupSafari

Rcvd upgrade 3.26 last night, now phone constantly freezes and all contacts lost

rcvd my upgrade to 3.26 last night, now my phone constantly freezes and all my contacts are gone.
Any solution out there? (unfortunately I did not have backup assistant turned on)
tia,
oldbuck

oldbuck wrote:
rcvd my upgrade to 3.26 last night, now my phone constantly freezes and all my contacts are gone.
Any solution out there? (unfortunately I did not have backup assistant turned on)
tia,
oldbuck
Thanks for posting oldbuck!
Glad to hear you were able to resolve the freezing issue on your DROID Incredible! I would be happy to see if we can restore your contacts.
I know you mentioned you didn't have an active Backup Assistant account at the time of the update, however, did you have a Google account setup on your device prior to the update? If so, check on www.gmail.com to see if your contacts are backed up in the "Contacts" section. If they are you can just readd the Google account to your device and enable the "Sync Contacts", and all of your contacts will be synced back to your device.
I trust I have answered your question, and have addressed your concerns.

I still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

i still have a warranty but it will be out in a week. i previously have a sound distortion problem with my mac for months and suddenly it just fix itself. what should i do? i'm worried that it will comeback and i dont have a warranty anymore.

JoBautista,
you still have the option (before your warranty expires) of purchasing an AppleCare Protection Plan, which will provide an additional two years of coverage. Once your warranty expires, you will no longer have the option of purchasing AppleCare.

TS4097 we have multiple users in our family and multiple devices all sharing one itunes account. i think we are all synced to one icloud account and it is a nightmare....contacts lost, text messags showing up on multiple devises etc. how do we fix this?

We have our family sharing one itunes account. we have 3 iphones, 2 macbook airs, 2 ipads and 1 mac. I am not sure how we even got started on the icloud but somehow we did and everything is a mess. The ipads are showing the text messages, the contacts are all combined, the apps that my duaghter downloads are appearing on all devices. how do we fix this so contacts are not shared, messages are not shared and apps are not automatically synced to all devises?

You have two different issues going on. You are getting each other's messages because you are sharing the Same Apple ID for iMessage. This can be corrected by going to Settings>Messages>Send & Receive on add the devices and doing one of the following:
Either uncheck the email address shown under "You can be reached by iMessage at" on all of your devices; or
If you want to continue to receive iMessages at this email address on one of your devices, on all of the other ones tap the Apple ID at the top, sign out, then sign back in using a different Apple ID (so all devices will be using a different Apple ID for iMessage). Note: you can continue to share an Apple ID for purchasing from the iTunes and App stores. It does not need to be the same as the ID you are using for iMessage, FaceTime and other services.
The second issue is that you are sharing the same iCloud account on your devices. When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account. To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores).
First decide which device(s) will be keeping the current iCloud account. On the one(s) that will be changing accounts, if you have any photos in photo stream that in your camera roll or backed up somewhere else that you want to keep on the device(s), save these to the camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this device, not from iCloud. The device(s) that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On [iDevice]. Next, set up a new iCloud account using a separate Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account. Repeat this process for all the devices that you need to migrate to new accounts.
When finished, to un-merge the data in your accounts you will have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting the other person's contacts from your account, and vice versa).

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise.

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
Is this something I should be able to achieve without having to recode the files?
Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
Thanks in advance for any help

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what can I do to start my iPad?

My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

I am new sto Lightroom and have also just changed from Apple to PC. I cannot figure out how to download photos from the Photoshop library to a file that will be sent to MPIX for processing. Also, does Lightroom have an easy access to a photo processing

I am new to Lightroom and have also just changed from Apple to PC. I cannot figure out how to download photos from the Photoshop library to a file that will be sent to MPIX for processing. Also, does Lightroom have an easy access to a photo processing capability such as MPIX?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request. How do I get Safari to be normal again?

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request. How do I get Safari to be normal again?

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

As Peter says above, only an Apple Store genius can advise you.
But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement. That is not necessarily true. Let them look at it and advise you what the remedy is. They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement.

Apple TV hanged and is now just showing the apple logo

Guys,
My aTV2 just hanged.
I tried a reset but now she is hanged on the boot and is now just showing the Apple Logo.
I tried another reset by pressing Menu+Down but again now I'm back on the boot and just showing the Apple Logo.
aTV2 LED is blinking.
Any idea on how to do this?
Thanks,

Have you unplugged from power and restarted?
If so, get a micro USB cable, hook it up to a computer with that cable alone, fire up iTunes and do a restore of the AppleTV firmware.

CSD Problem: Another supervisor just logged in with the sameID you are logged in with

Hi Folks,
Last month, I had encountered this incident "Another supervisor just logged in with the sameID you are logged in with" when I launched the CSD. When I looked at other supervisors account of the same team we were just the two of us. We are using AD and I am sure we have unique username/password. It worked before. I restarted the application, I uninstall then re-install. I cannot find any solution to it. Hope you can help me resolve this issue. I attached the snapshot of the error.
Thanks in advance!
/aullorenzo8

Do you have access to the UCCX(E) server? If so, run the showlicenseusage.exe file next time it happens and find out what IP address the "other" user is logged in as you from.
program files\cisco\desktop\bin\showlicenseusage.exe
Another possibility is that the machine you are logging in on already has an instance of CSD running that you are logged in to. Check your task manager for an already running process (supervisor.exe).

I am trying to uninstall itunes and keep getting a reject that reads "the feature you are trying to use is on a network resource that is unavailable." Its windows...help!

I am trying to uninstall itunes and keep getting an error that reads "the feature you are trying to use is on a network resource that is unavailable." Itunes on windows. Help!

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Am trying to upgrade iPad 2 to 6.1.2 and it shows error like "Unable to verify Update" you are no longer connected to the internet. But am connect to my wi-fi. Can somebody throw some light on this.

Am trying to upgrade iPad 2 to 6.1.2 and it shows error like "Unable to verify Update" you are no longer connected to the internet. But am connect to my wi-fi. Can somebody throw some light on this.
============================================================
Throws error saying
"Unable to Verify Update"
iOS 6.1.2 failed verification because you are no longer connected to the internet
============================================================
Can anybody please respond

Try this and see if it resolves the issue.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Then try again.

Attempting to update my itunes and a box stating this pops up "the feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes.64.msi

Atthempting to update my itunes and a box stating this pops up "the feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes.64.msi

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Safari constantly freezes and is slow. Just fix it Apple. Who do you think you are, Microsoft?

Similar Messages

Maybe you are looking for