Safari Develop doesn't recognize ios8 safari

I recently updated my iPhone to ios8 and my MacPro to 10.9.5. After the updates my Safari developer tools don't recognize the iPhone's version of Safari. It does recognize my iPhone, but gives me the message that there are "No Inspectable Applications". This makes it very difficult to debug websites and apps for the iPhone. Can anyone suggest some help?

I would post in the developer's forum
Developer Forums

Similar Messages

  • Safari doesn't recognize http addresses

    When I input:
    http://www.devon-technologies.com/files/academy/devonthink/videos/videotutorial- 1.mov
    to safari, I get the error message:
    Safari can’t open “http://www.devon-technologies.com/files/academy/devonthink/videos/videotutorial- 1.mov” because Mac OS X doesn’t recognize Internet addresses starting with “http:”.
    Huh? firefox had no problems opening the page.

    Thanks for the response. Two questions:
    1. I should know this, but it's been a long time, how do I create a new account? I know the account manager will allow to designate the new account as an admin.
    2. Why is a new account needed?

  • Safari Doesn't Recognize Symantec VIP Plugin

    Our company uses Symantec VIP for authentication.  I've just installed a fresh instance of Mac OS Mavericks and setting things up.  I've tried to install the Symantec plugin, but Safari doesn't recognize it.  It continually asks me to reinstall, but nothing.  In Firefox it works fine. 
    Any ideas why Safari wouldn't recognize this?  Driving me nuts. 

    Hello Diceman726,
    The latest Symantec VIP Access Desktop for Mac does not install any browser pluggin. You may get the latest VIP Access for free at the link below:
    https://idprotect.vip.symantec.com/
    If this is not the product that you are looking to use, then please share screenshots and more details about the plug-in.
    DETAILS ABOUT VIP ACCES DESKTOP FOR MAC VERSION 1.0.1
    Supported Platforms
    This release of VIP Access for MAC is supported on the MAC OS X 10.5 or higher.
    Installing the VIP Access for MAC
    Complete the following steps to install VIP Access for MAC:
    1. Uninstall the existing VIP Access for MAC application. For more information on uninstalling the existing VIP Access for MAC application, see Uninstalling the VIP Access for MAC
    2. Download the VIP Access.dmg file from the Symantec Web site.
    3. Double-click the VIP Access.dmg file to mount the disk image with the name VIP Access.
    4. Move the VIP Access for MAC application from the disk image to your Applications folder using a drag-and-drop operation. This enables all the users of the system to access the VIP Access for MAC application from their respective Applications folder.
    5. Double-click the VIP Access for MAC application to launch the application.

  • Safari doesn't recognize latest upload into iPhoto since installing 10.6

    I use a website that requires me to upload photos. However, ever since I foolishly installed Snow Leopard Safari doesn't recognize the latest photos in iPhoto until after I close and re-open Safari. Indeed, sometimes that doesn't even work. Any ideas, or is Snow Leopard Apple's ME and no hope for a solution?

    I suggest you back up your Mac, then use Software Update (in the preferences window) to install the update.
    Interesting. I get better results with the Combo updaters:
    http://support.apple.com/kb/DL1048
    (.. and I run Disk Utility -> Repair Permissions after every software install or update.)

  • I have firefox os 19 and silverlight 5.1 but firefox doesn't recognize it but silverlight works fine in safari what can i do?

    I have firefox OS x 19 and silverlight 5.1 but firefox doesn't recognize it but silverlight works fine in safari what else can i do?

    Application
    User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_5) AppleWebKit/536.28.10 (KHTML, like Gecko) Version/6.0.3 Safari/536.28.10
    Ok, how's this? and flashback isn't installed, what else?

  • Safari 1.24 (OS X 10.3.8) doesn't recognize "disabled" attribute

    In Safari 1.24 (OS X 10.3.8), Safari doesn't recognize "disabled" attribute when the input type="password". It works correctly when the input type="text". Is there any work around this issue ? Upgrading to newer Safari is not the answer I'm looking for.
    Thank you.

    Hi,
    If it's a bug in Safari's handling of the input element, then no there's nothing you can do to get around it.
    What are you trying to achieve? If you explain your aims maybe someone could offer an alternative solution.

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • What can I do when I try to access a URL and get the message "MAC OSX doesn't recognize internet addresses starting with "c:"?

    I recently tried to download a pdf file from a website in the UK.  Up popped a message saying the website could not be accessed, followed by this message: "MAC OSX doesn't recognize internet addresses starting with "c:".  I was able to access the website easily (its domain was "www") and the page listing the pdfs, but could not download a pdf.  Of course," c:" appears not to be a valid domain name, but why would anyone use "c:" in place of a domain name in their URL?  And what can I do about the problem?  I'm using Snow Leopard 10.6.8 and Safari 5.1.10, but also have Firefox and Chrome loaded.  Thanks.

    An address starting with c: wouldn't be any kind of domain name. C: is the drive lettering system DOS and and later uses. By default, A: and B: are reserved for your first and second floppy disk drive. All hard drives are then named C: through Z:, if you have that many. C: is normally your startup disk.
    Anyway, their PDF file is incorrectly linked to a file directly on the C: drive of someone's computer. It's not going to work no matter what you do.

  • Why os x doesn't recognize internet addresses starting with "wsytd"

    There seems to be an increasing number of web addresses that are not recognised, I'm using safari and my OS X Lion software is current.
    I am a complete novice and not very familier with mac problems, anybody knows why evey time I try to use a download button the message comes up OS X doesn't recognize; is it me????

    URLs follow a standard pattern that consist of several elements, the most important of which is the protocol used to access the resource (e.g. http:// for HTTP-based requests, ftp:// for FTP, etc.)
    In this case you're trying to download a link using the 'wsytd' protocol. This is not a standard protocol at all, but appears to be something related to WonderShare, a third-party app for downloading content from YouTube.
    As such, the problem is not with your machine, or Safari at all, it's with some kind of Wondershare app.
    Either Wondershare isn't installed on your machine (so the OS doesn't know to pass wsytd:// URLs to it), or the app is broken in some way. A quick search on the net finds this discussion which indicates that you're not alone and alludes to the possibility that YouTube have moved to block this app from downloading content (presumably on some copyright basis). If that's the case then your recourse is to go to the software vendor to look for updates that might work. Either way, it's not your Mac, per se., that's at fault.

  • Mac OS X doesn't recognize Internet addresses starting with "http:"

    I have a Mac G5 and I am using Safari 4.13. My problem is that whenever A site I am on has a reference to a document (usually a ,pdf file) the screen goes blank for a moment as if it is going to the sight and then the above message appears on the screen. The message makes no sense to me and I am very frustrated as naturally I need to access these documents. I have tried going back and forth, cutting and pasting with no affect. If I use another browser it works just fine, I only have this problem with Safari. Any suggestions would be helpful.
    Hayne7

    Hi and welcome.......
    I found a thread that might help you.
    http://www.mackb.com/Uwe/Forum.aspx/mac/27730/OSX-doesn-t-recognize-http
    So from your Safari menu bar click Safari / Preferencees then select the Security tab.
    Where you see *Web content* if the box next to *Enable plug-ins* is not selected, select that box then quit Safari (Command + Q) then relaunch Safari.
    Carolyn

  • Image Capture doesn't recognize iPhone and Camera anymore

    Image Capture doesn't recognize my iPhone or my Fujifilm camera. I am pretty sure this happened after updating to Safari 4.0.2 and having to restart which I did today. Yesterday I was able to to browse through my devices.

    I'm adding that iTunes has no problem reading the iPhone.

  • Error Message. IE doesn't recognize webkit font, converts to arial

    MuseJSAssert: Error calling selector function:TypeError: 'undefined' is not a function (evaluating 'PIE.attach(this)')
    I get this error in IE only. Also, IE doesn't recognize my font and converts everything to Arial, so it's all bigger and bolder and it doesn't fit how I want it to.
    I'd like to know what this error means and also how I can get IE to recognize the WebKit font that I have used.
    procleansupply.net

    Hi ChoreoGraphics,
    Search and ye shall find [see link below]
    Newsgroups in Safari or Mail?
    Hope that helps.

  • Mac OS X doesn't recognize Internet addresses starting with "lastfm:".

    I am running Safari 5.0.2 on Snow Leopard 10.6.4.
    I am unable to open my last.fm radio streams in the browser. I receive the message:
    Safari can’t open the specified address.
    Safari can’t open “lastfm://user/tivorion/recommended” because Mac OS X doesn’t recognize Internet addresses starting with “lastfm:”.
    Any assistance would be greatly appreciated.

    It seems addresses starting with lastfm:// are opened in the Last.fm Scrobbler.
    To listen to my radio streams, I had to go to http://www.last.fm/listen
    Problem solved.

  • Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize.

    Firefox doesn't print or open preview, when I select print preview I get the following error: Couldn’t open the file. It may be corrupt or a file format that Preview doesn’t recognize.
    However, when I print from Safari or another program, I have no problems
    == Yesterday

    The only solution to corrupted files is to restore from your back up.
    Regards
    TD

  • Facebook doesn't recognize flash player

    I'm have the most recent flash player and Internet Explorer, running Win 8.1. When I try to upload photos on Facebook I'm shown a prompt that says I don't have flash. I click the link, am taken to adobe where I'm told that I do have flash but am not running IE in Win 8. I've gone through the whole checklist of enabling shockwave (it was never disabled) and turing off active x filters (also already in that condition) and can't seem to get Facebook to accept that I've done everything it says that it needs me to do.
    I've installed firefox to see if that would work, it gave me the same "need flash" prompt so I uninstalled and reinstalled the newest flash player. Now firefox allows me to batch upload photos but IE still thinks I don't have flash and adobe.com still thinks that I'm not running IE.
    Is there anything I can do to make your product work in internet explorer?

    It's NOT that Facebook doesn't rrecognize Flash Player. It doesn't recognize IE11, and if it can't recognize the browser, it won't recognize the plugins in the browser. Microsoft is aware of the problems with their new browser, but... they're in no hurry to fix it.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using a different browser. Trouble with that is... it's seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Maybe you are looking for

  • IF Form region AND report + search tool in same page THEN = problem

    Helllo everybody I posted an initial and now the advanced as I received helpful comments but still is unsolved: Problem: If I have a Form, and a Report With a Search feature on the same page the problem is that when I click on the button of Search to

  • Unable to create a pdf file using the print routine

    Hey all, Recently, i've been unable to create a pdf using the print routine from quickbooks, word, outlook, etc... using the print routine and the adobe pdf driver.... I have vista and cs3... Any thoughts? Thanks, Murph [email address deleted by host

  • Date/Time to Second

    I am trying to create a custom timestamp with the node Date/Time to Second.  I am not sure why, but regardless of what input I feed it, I always get 00:00:00.000 PM MM/DD/YYYY.  Why is that?  See code. Kudos and Accepted as Solution are welcome! Atta

  • Missing version field in response from server when accessing resource: (htt

    I'm getting the above error when I specific a version # in the <jar> field under <resources>. If I leave the version out, the application works. If I put in it fails. In both cases I am supplying a version.xml file. From the logs (at the end) I only

  • Radar plot with category label changed

    Hi I tried this example vi, Line Graph (Excel).vi, with some modification as shown in the attached picture. I changed the plot to a xlRadar. After I run the vi, I got the result as shown in another attached picture. I would like to know how to change