Safari displays blank pages for some sites

MBP 15 inch. mid-2014
OS X Yosemite 10.10.1
Safari Version 8.0.2 (10600.2.5)
Some pages, sometimes on Apple's on support site simply display as blank pages. The same page displays perfectly on Firefox or Chrome. What is this strange behaviour? For example, this link: http://support.apple.com/kb/PH15327 shows a completely blank page. See: http://i.imgur.com/PRPWgus.png
The same site displays without problem in Firefox:
http://i.imgur.com/82lEuaF.png
I have no extensions installed in Safari. JS is enabled, all settings are default. This is a fresh and clean install of Yosemite. No anti-virus installed.
What's going on? Any pointers will be appreciated. Thanks.

As an aside, and I don't have specific data for this, but Safari does seem to load some other pages so slowly, it's annoying to the extreme.
How can I debug this? (The blank page issue.)

Similar Messages

  • Blank page for some user

    sharepoint server was move to another place, back up and restore!
    now some of pages are blank for some user.  they see blank page instead of main page!

    Hi Hoorie,
    Please navigate to these problem pages in SharePoint Designer 2013, check-out the page, then check-in and publish as a major version and approved, then check if these pages could be accessed by some particular users you mentioned.
    If issue still persists, please copy the problem page, delete and re-add the webparts into the page, see if it helps.
    Thanks
    Daniel Yang
    TechNet Community Support

  • Grey blank page for some messages since upgrading to mountain lion

    Just upgraded several days ago from Snow Leopard to Mountain Lion (10.8.3) and I have notice that some email messages (Apple Mail) I only get a blank grey page. I know I have a lot of messages in my mail account and wonder if that might be the problem. Any help would be appreciated.
    Jerry

    I tried rebuild but it did not help. I still have a grey empty page on some messages. They usually part of a conversation, I tried to uncheck the "organize by conversation" but I still randomly have that problem. Sometimes if I quit and reopen Mail it goes away but other times it doesn't. Is it possible that having a large number of messages in the inbox might be responsible?

  • Safari quits -- blank page for 3 seconds after apple update -- cannot run

    I have a G-4 version 10.4.7. This apple runs good -- but, yesterday I received a standard update files from apple and did an update -- afterwards, my "safari" stopped running.
    Safari will open up for about 3 seconds and disappear. The template is there for about 3 seconds and doesn't allow me to type in anything in the search area. This all happened after a routine up-date from apple (not sure if this is the cause or not).
    Any ideas on how to get the sarafi up and running again? States "application quit unexpectedly.: mac os x and othe applications are not affected. click reopen -- then happens all over again. Any simple ways to solve this?

    Hello Nantucket Whaler, Welcome to Discussions
    ( a distance from the Gray Lady ; )
    Did you do permissions repair with the disk utility before and after the install do you follow these guidelines for installing os updates:
    1. Backup your data. If unsure what is the best method of backing up your data to keep it safe, be sure to start your own topic here and many posters will be glad to find the best method for your needs.
    2. Turn off Energy Saver and any automatic software updating mechanism from Quicktime, to Software Update, to third party updates.
    3. Dismount (if a data storage peripheral) and disconnect third party peripherals.
    4. Verify all your software including drivers for third party devices are known to work with the update in question, or needs the update.
    If it does not need the update to run stop right here, and keep on using the version of the operating system you are running.
    5. Do not update if your system is slow or unhealthy. Troubleshoot any system issues you may have with fonts, cache, or preferences before updating.
    6. Make sure all Apple Applications are stored in the Applications folder (except Applications Mac OS 9 for Classic applications).
    7. Repair permissions with Applications -> Utilities -> Disk Utility.
    8. Apply the right update for your machine. Use Apple menu -> About This Mac to determine if you have a G3, G4, G5 (PowerPC, also known as PPC), or Intel. Here are the updates by platform:
    Above from a.brodys Topic: Now that 10.4.6 is out, let's review the upgrade steps.
    It applies to 10.4.7 as well.
    The fix may be to " Following these steps and reinstall the 10.4.7 Combo up, make sure it is the right one for your computer ppc vs. intel.
    However first:
    Go to the home folder/~Library/Logs/Crash reporter/ Safari locate the most recent crash log starts from the date and next date indicatse a second log please post only 1, the last on is usually the latest check the dates, copy and paste the enire log here in a post.
    Then do a repair permissions-> with Disk Utility -> Applications/Utililies folder .
    Eme

  • Safari shows completely blank pages for some websites

    Since the latest upgrade to Safari - some pages just appear as completely white screen - www.avios.com for example.
    This is not a problem with the sites as then function normally in other browsers I try.

    I experienced the same problem yesterday, in addition to Safari being extremely slow to load pages. I was making an online purchase yesterday and the Checkout page kept coming up blank. Finally had to switch to Firefox and will continue to use Firefox until Apple fixes Safari.

  • Preview displays blank page with some pdf files but prints what is hidden

    Some of my pdf files have started coming up as blank in Preview. There still is data underneath, which selecting areas will disclose as though you are scraping white out off the print.  Printing is unaffected, and only some files are affected.  Tried repairing permissions, but no luck.  I recently did the OS update, and didn't notice the problem before that.  I have restarted the computer a couple times,.  a few odd artifacts have shown up on the screen as well, though box selecting over these causes them to disappear.  I haven't been able to find any consistent difference in the pdfs that will display properly and the ones that won't.  doesn't appear to be associated with when they were created or  which version of software they were created with.  Saving them under a different name doesn't help.  Adobe reader works fine, so it is specific to Preview ( which I would rather keep as my default reader )
    Any ideas what went wrong?  How to fix it?

    I have no trouble viewing the file you posted in the same version of Preview that you have.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • By default, I leave pop-ups blocked in Safari, but, for some sites, I must allow them. How to do this? Is it possible?

    By default, I leave pop-ups blocked in Safari, but, for some sites, I must allow them. How to do this? Is it possible?

    Just un-check BLOCK POP-UP WINDOWS and reload the page.

  • When I first start up computer and click on Safari, a blank page appears. I am trying to make MY MSN as the opening page. How do I do this? Thanks for any help.

    When I first turn on my computer and click Safari, a blank page appears. I use to have MY MSN as the opening page on Safari. Don't know what happened, but how do I restore it back to the way it was? I've tried everything, I know it has to be something easy, but can't figure it out. Thanks for any help.

    In Safari goto Preferences > General... Homepage...

  • Helpviewer displays empty window for some applications

    I just went to check Help in Mail for something and got a blank window. I've seen this before so i walked through the X-Labs excellent "Troubleshooting HelpViewer" article, which has helped me in the past. But the basic dumping of cache files and mail related plist files did not help.
    As suggested in the X-Labs article I enabled tracing for HelpViewer, lots of data information when invoking Helpviewer works, but not much when it doesn't, the following is typical:
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Mail Help
    2006-01-22 09:15:18.687 Help Viewer[1513] www.info.apple.com reachability: -------
    2006-01-22 09:15:18.757 Help Viewer[1513] www.info.apple.com reachability: -r-----
    2006-01-22 09:15:18.758 Help Viewer[1513] [HelpViewController handleURL:] processing url: help:openbook=%22Mail%20Help%22
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Facts:
    * Helpviewer works for some applications:
    Finder (mac help), Terminal, Calculator, Backup, Console, HelpViewer
    * Helpviewer displays a blank windows for some applications:
    Mail, Safari, iCal, TextEdit, AddressBook, iTunes, Preview, iPhoto, QuickTime
    * Mail, and other apps are otherwise working correctly
    * Mail Version 2.0.5 (746/746.2)
    * Tiger Version 10.4.4
    * I don't know when this problem may have arisen - first noticed today.
    Any Suggestions? Only major recent change was the 10.4.4 upgrade a few days ago, but i don't know if this problem existed prior to that.
    Thanks for any help out there!
    20Gig pod and a mini   Mac OS X (10.4.4)  

    Search Macupdate.com or Apple main page for Onyx, and in the "Automation" section there is a option to reset Mac OS X help.
    The system optimization and cache cleaning should be done about once a month to optimize the system a little bit.
    [ Edited by Apple Discussions Moderator ]

  • Creating Master page for publishing site

    Hi,
    I am trying to create a master page for publishing site. I have downloaded the "StarterBranding - V1.3" from codeplex, and used the "Starter Publishing". Currently it is not showing logo, search box, top navigation, breadcrumbs.
    I have an existing master page which has lot of tags, and I am not sure what they represent. The below code is after the script manager tag in the body section:
    <SharePoint:AjaxDelta id="DeltaDelegateControls" runat="server">
    <SharePoint:DelegateControl ID="DelegateControl2" runat="server" ControlId="GlobalNavigation" />
    <SharePoint:DelegateControl ID="DelegateControl3" ControlId="GlobalSiteLink3" Scope="Farm" runat="server" Visible="false" />
    </SharePoint:AjaxDelta>
    <div id="TurnOnAccessibility" style="display:none" class="s4-notdlg noindex">
    <a id="linkTurnOnAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(true);UpdateAccessibilityUI();document.getElementById('linkTurnOffAcc').focus();return false;">
    <SharePoint:EncodedLiteral ID="EncodedLiteral1" runat="server" text="<%$Resources:wss,master_turnonaccessibility%>" EncodeMethod="HtmlEncode"/></a>
    </div>
    <div id="TurnOffAccessibility" style="display:none" class="s4-notdlg noindex">
    <a id="linkTurnOffAcc" href="#" class="ms-accessible ms-acc-button" onclick="SetIsAccessibilityFeatureEnabled(false);UpdateAccessibilityUI();document.getElementById('linkTurnOnAcc').focus();return false;">
    <SharePoint:EncodedLiteral ID="EncodedLiteral2" runat="server" text="<%$Resources:wss,master_turnoffaccessibility%>" EncodeMethod="HtmlEncode"/></a>
    </div>
    <div class="s4-notdlg s4-skipribbonshortcut noindex">
    <a id="A1" href="javascript:;" onclick="document.getElementById('startNavigation').focus();" class="ms-accessible ms-acc-button" accesskey="<%$Resources:wss,skipribbon_accesskey%>" runat="server">
    <SharePoint:EncodedLiteral ID="EncodedLiteral3" runat="server" text="<%$Resources:wss,skipRibbonCommandsLink%>" EncodeMethod="HtmlEncode"/></a>
    </div>
    <div class="s4-notdlg noindex">
    <a id="A2" href="javascript:;" onclick="document.getElementById('mainContent').focus();" class="ms-accessible ms-acc-button" runat="server">
    <SharePoint:EncodedLiteral ID="EncodedLiteral4" runat="server" text="<%$Resources:wss,mainContentLink%>" EncodeMethod="HtmlEncode"/></a>
    </div>
    <div id="TurnOffAnimation" style="display:none;" class="s4-notdlg noindex">
    <a id="linkTurnOffAnimation" href="#" class="ms-accessible ms-acc-button" onclick="ToggleAnimationStatus();return false;">
    <SharePoint:EncodedLiteral ID="EncodedLiteral5" runat="server" text="<%$Resources:wss,master_disableanimation%>" EncodeMethod="HtmlEncode"/></a>
    </div>
    <div id="TurnOnAnimation" style="display:none;" class="s4-notdlg noindex">
    <a id="linkTurnOnAnimation" href="#" class="ms-accessible ms-acc-button" onclick="ToggleAnimationStatus();return false;">
    <SharePoint:EncodedLiteral ID="EncodedLiteral6" runat="server" text="<%$Resources:wss,master_enableanimation%>" EncodeMethod="HtmlEncode"/></a>
    </div>
    <a id="HiddenAnchor" href="javascript:;" style="display:none;"></a>
    <div id="suiteBar" class="ms-dialogHidden noindex">
    <div id="suiteBarLeft">
    <div class="ms-table ms-fullWidth">
    <div class="ms-tableRow">
    <div class="ms-tableCell ms-verticalAlignMiddle">
    <SharePoint:DelegateControl id="ID_SuiteBarBrandingDelegate" ControlId="SuiteBarBrandingDelegate" runat="server"/>
    </div>
    <SharePoint:AjaxDelta runat="server" id="DeltaSuiteLinks" BlockElement="true" CssClass="ms-core-deltaSuiteLinks">
    <div id="suiteLinksBox">
    <SharePoint:DelegateControl id="ID_SuiteLinksDelegate" ControlId="SuiteLinksDelegate" runat="server" />
    </div>
    </SharePoint:AjaxDelta>
    </div>
    </div>
    </div>
    <div id="suiteBarRight">
    <SharePoint:AjaxDelta runat="server" id="DeltaSuiteBarRight" CssClass="ms-core-deltaSuiteBarRight" BlockElement="true">
    <div id="welcomeMenuBox">
    <wssuc:Welcome id="IdWelcome" runat="server" EnableViewState="false" />
    </div>
    Are the above tags required in Master page? what is the use of it? I have more tags and will add after knowing the use of it in future threads.
    Thanks

    Hi,
    According to your description, my understanding is that you want to know about the each tags useful in master page.
    In SharePoint 2013 master page, there are some common tags like body tag, head tag and meta tag and some style CSS div tags. For the useful of these tags, I suggest you can refer the articles below:
    Understanding HTML master pages in SharePoint 2013
    In your custom master page, it will have some custom css tags depend on the display style but it is no required for master pages, if you want to know about what tags is required in master page, you can compare the custom master page with the  OOTB master
    page.
    More information:
    Create a minimal master page in SharePoint 2013
    Thanks
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • IPad (v8.1.3) prints blank pages in some Notes files

    In the Notes app of my iPad (8.1.3) using AirPrint it sometimes prints nothing but blank pages. Some Notes files will print, however, but others will not. Also, If I copy text from a Notes file that prints only blank paper to a file that was able ti print text (as it is supposed to) the file is suddenly infected by whatever, stops printing text and prints only blank pages. How can I reliably print out all of my Notes files?

    Hi,
    I came here for the same problem that the one described here (Preview won't display some pdf documents). But, as it was mentionned, Acrobat is able to show them. Tried the anti-aliased option, no luck there either. However, I noticed that the document not handled by Preview are reproductions, copies, pictures of documents. For example, I work with scholar articles. The problematic documents are not pdf saved directly, let's say, from Distiller or Word. They seem to be scanned documents, and each page of the pdf is actually a big picture. Could it be that Preview is not strong enough to handled this kind of doc?
    By the way, a Preview discussion folder would be nice...

  • Firefox connects to google-analytics for some sites, and then gets stuck, and I can never get onto the site. How do I prevent Firefox from connecting to google-analytics? I use XP with service pak 3 in English

    Firefox connects to google-analytics for some sites,when i click on links in websites or emails and then gets stuck, and I can never get onto the site. Or opens a new bower behind the one i'm usind that's blank i don't even know it's there untill i close the one i'm using. How do I prevent Firefox from connecting to google-analytics? Or opening a blank bowser behind the one i'm using. I use XP with service pak 3 in English
    == This happened ==
    A few times a week
    == a couple months ago

    I got the same issue.
    I go on a website and all the sudden another window pops up with "results.google-analytics.com" or "search.google-analytics.com". It has often ads for other sites for example. black single dating site
    how can I can I stop that from happening again?
    I didn't download or do anything, just visit websites, that I visit on a regular basis.
    OS: Windows XP
    Firefox Version: 3.6.6

  • How to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some users and allow the access for some users?

    I have a requirement to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some of the users and allow the access for some of the users.
    I have applied the below code on the web.config file but this modification impacting only on the web application level not on the site collection and sub site level.  
    <location path="_layouts/15/InPlaceRecordsSettings.aspx">
        <system.web>
          <authorization>
            <deny users="*" />
          </authorization>
        </system.web>
      </location>
    <location path="_layouts/15/InPlaceRecordsListSettings.aspx">
        <system.web>
          <authorization>
            <deny users="*" />
          </authorization>
        </system.web>
      </location>
    When I tried the access on
    :<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx">http://<servername>:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx page allowed the access for all users.           
    Please suggest the possible solution to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages on SharePoint2013.
    Thanks
    Ramasubbu

    You can't do it from OOTB. 
    _layout folder is accessible to the users if they have read access in any of the site even subsite.
    You can modify *.aspx file, add your custom control which will check user.
    [custom.development]

  • Printer just started feeding a blank page after some, but not all printed documents

    Printer just started feeding a blank page after some, but not all printed documents

    Hi @cam21 ,
    I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    What application are you printing from?
    It may be a setting in the application.
    Does this happen from all applications?
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
    How is the printer connected? (USB/Ethernet/Wireless)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If there is anything else I can help you with, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • When the Wifi is connected, the iphone seems to search for some site and if firewall does not allow the access to that site, it disconnects the connection to Wifi. Can anyone help on this?

    When the Wifi is connected, the iphone seems to search for some site and if firewall does not allow the access to that site, it disconnects the connection to Wifi. Can anyone help on this?

    Hi SBEG2015,
    I'm sorry to hear you are having these issues with your iPhone. Based on your description of what has happened and the symptoms you are seeing, you may need to have your iPhone evaluated and/or serviced. You may find the following page helpful:
    Apple - Support - Service Answer Center
    Regards,
    - Brenden

Maybe you are looking for