Safari does not show url address line. google is taking up all the space...

safari does not show url address line anynore. google is taking up most of the space on the safari page

Hover the cursor over that line until it becomes a big plus sign with arrows on the left and right. Click and drag the cursor so that the rest of the address line is the way you want it.
(66963)

Similar Messages

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

New I Mac- safari does not show the URL window- help!

My safari does not show the website address window, but everyone else in the family shows it. How do I fix this so that I can view the address window. Thanks.

HI John,
From the Safari Menu Bar click View/Customize Toolbar.
Drag the default Toolbar up or individual items.
Carolyn

Wism controller does not show url redirection spalash page

Hi
Wism controller does not show url redirection/splash page .
client takes the ip from the dhcp server. when browsing its not going to the authentication page as usual
Thank you

Can you elaborate on your issue... really hard to follow. To me, it seems like you want to use a guest splash page. The client associates to the open guest ssid and get's an ip address. Now the user has to open a browser to get the portal page correct? This has nothing to do with the WLC, but the OS on the device. Some devices can detect if no internet is present after authentication and obtaining an address. This means the device will automatically open a browser to present the user with the splash page. Other devices will require the user to open a browser to get the login screen.
Scott

Express does not show IP address of wireless camera

I have a functioning Axis M1011 wireless camera, with a live stream into Safari on my local iMac. All is well.
My brand new Airport Express is definitely providing the wireless camera feed, as my internal airport card on my iMac is OFF.
What is odd is that Express does not show IP address of the wireless camera when you click on it in Airport Utility.
The iMac is static at 10.0.1.2. Express LAN IP is static at 10.0.1.1. The camera's wireless IP is static at 10.0.1.3.
I have a working, hidden network created by express.
I am baffled why express does not "report" the IP address of the camera that it definitely sees.
It does not report any wireless clients at all.
Any ideas?
Thanks.
mac

So your ASA should have a route on the inside interface to internal networks. The address of that next hop in the routing table is the one you should have in your arp table allowing you to reach non-directly-connected (subnet-wise) hosts within the scope of that route statement.
Think through the logic - ASA pings a host. It needs to determine proper egress interface. It checks and asks "Is it reachable via a directly connected interface (most preferred route)?" Answer no. "Do I have a route statement telling me how to get to it?" Answer yes (otherwise use default). OK - so ASA sends packet out egress interface defined in that route statement to the next hop as defined in route statement and waits for reply.

CLI does not show on secondary line in cisco 9971 through MGCP CO line

Hi,
There's an issue that CLI does not show on secondary line in cisco 9971 through MGCP CO line. Only the calls that are getting to the first line shows CLI.
It shows as "unknown number" when it's getting a call to the secondary line ( MGCP CO line).
Has anyone faced this issue?
Please help to resolve.
Thanks & Regards,
Achintha

Don't use TimeLines. Log-in to the Adobe Exchange with your
Widget Browser ~ http://labs.adobe.com/technologies/widgetbrowser/
jQuery & Ajax Slideshows from Adobe Exchange:
    * jQuery Cycle Widget
    * Lightbox Gallery Widget
    * Spry Content Slideshow
    * Spry Image Slideshow
As to your layout problems, we still need a link to your page.
Free host for testing: http://www.000webhost.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

HT201263 My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

JesusDGZ wrote:
My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?
I have no clue what you mean by "all the different methods." Here are my suggestions.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

TS4006 Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

Is the device lost or stolen? If so it may be turned off, not connected to the internet, and/or have a dead battery in which case it may never appear.
The what next is then covered in:
If your iPhone, iPad, or iPod touch is lost or stolen
Reporting a lost or stolen Apple product

Firefox does not show url in navigation toolbar while loading webpage (in new tab)

Firefox 3.6 when opening a link in new tab the url does not show in navigation toolbar while loading the web page. All ypu see is "Type a Web Adress" until the page load.
Before with my older version the URL was visible in navigation toolbar even before page started loading. How can I get this back?

A couple of possible causes. First check for an incompatible add-on, for details of how to do that see the [[troubleshooting extensions and themes]] article.
Another possible cause is a problem with the file that stores bookmarks. One of the symptoms is the URL not being updated in the Location Bar as you browse. For details on this see [http://kb.mozillazine.org/Locked_or_damaged_places.sqlite locked or damaged places.sqlite].

Sh arp does not show mac address of IP --- ASA

Hi Everyone,
I can ping the IP from the ASA but when i do sh arp it does not show me mac address od that IP.
Need to know the reason behind this.
Regards
MAhesh

So your ASA should have a route on the inside interface to internal networks. The address of that next hop in the routing table is the one you should have in your arp table allowing you to reach non-directly-connected (subnet-wise) hosts within the scope of that route statement.
Think through the logic - ASA pings a host. It needs to determine proper egress interface. It checks and asks "Is it reachable via a directly connected interface (most preferred route)?" Answer no. "Do I have a route statement telling me how to get to it?" Answer yes (otherwise use default). OK - so ASA sends packet out egress interface defined in that route statement to the next hop as defined in route statement and waits for reply.

Safari does not show correct page

A friend of mine uses Safari, but it does not show the correct page. He tries to view http://www.ventanasalmar.biz. This is hosted as one of my 10 domains on my acount with a hosting company. He is for some reason redirected to my default account. When he uses Firefos from the same location, everything is OK. As I do not have the same program (Safari) myself, I cannot test. My friend is in the US, I am in Norway, so I cannot just pop over
Any suggestion about what could be wrong?
Windows XP

askim --
Welcome to Apple Discussions !
I tried on my Safari, and also on another browswer, Shiira.
Your site works great on both.
Your friend probably needs some housecleaning of his safari caches, etc.
Ask him to do these and try again:
1. Empty your cache & History settings via the Safari menu
2. Trash your Icons Folder:
HD>Users>Home>YourName>Library>Safari -->Icons
Restart Safari and a new folder will be automatically regenerated.
(This folder saves favicons of all the sites you visit. Needs cleaning periodically -- or you can change that file's preferences to "Read Only"
rather than "Read & Write." This will keep it from growing in size.)
3. Launch Font Book and check all fonts for duplicates. A duplicated font will have a bullet beside the font family and you can resolve duplicates by selecting the font and at the menu bar, go to Edit > Resolve Duplicates.
Do this for each font with a bullet next to it.
If he's still having problems:
4. Shut down your computer . . . unplug the computer, modem, and router, if you have one. Let everything sit for 2-3 minutes. Plug everything back in, start up your modem & router first, let the lights set up right, and then restart your computer.
Hope this helps

Very First letter typed in safari does not show

I open a website and type my user ID and other info. The very first key I type does not work, Safari does not respond to the key stroke and displays nothing. If I keep pressing a key longer Safari responds and displays letters (aaaaaa) instead of a letter (a) which is totally annoying. This started when Safari became 8. Can anyone help please???
Macbook Mid 2011 13 inch, Core i5 1.7GHz, Memory 4GB, Yosemite and Safari 8.

Larger thread with the same issue: https://discussions.apple.com/thread/6619878
Do you see the change in behavior if you do the trackpad click vs. tap as described in the other thread?

File's Owner does not show methods in Interface Builder 3.2.6 but the class is set correctly and the nib on the lower left is green

Hi, I'm trying to make my first IPhone app. After having problems with interface builder the first time I coppied the code directly from a tutorial in case I made any mistakes. I saved the program, and re-opened the .xib file. Right clicking File's Owner does not show a list of methods. I've been looking around for solutions for this but have not gotten anything to work. I tried deleting the default .xib and creating a new one through file-> new file. This did not help. I did notice that File's owner was showing up as a light blue cube apposed to a yellow one now and found that a bit odd but otherwise nothing changed. I opened the library menu and selected helloWorldiPhoneViewController so it would show up in the view port. I set the class field of File's Owner to hellowWorldiPhoneViewController. File's Owner still does not show methods when right clicked or when a line is dragged over a button. I read somewhere that the color of nib on the lower left of the viewport may indicate a problem, but it is green not indicating any issue. Every solution I found for someone else seems nto to work for me and I don't know how to continue.
here is the .h file just in case:
// HelloWorldViewController.h
// HelloWorld
// Created by Paul Peelen on 2011-03-14.
// Copyright 2011 9697271014. All rights reserved.
#import <UIKit/UIKit.h>
@interface HelloWorldViewController : UIViewController {
UILabel *textLabel;
@property (nonatomic, retain) IBOutlet UILabel *textLabel;
- (IBAction)changeTheTextOfTheLabel;
@end
I'm trying to connect changeTheTextOfTheLabel to a button and textLabel to a label

You need a parameter for an interface builder method. The type should be id and the name is typically "sender". It would look like this:
- (IBAction)changeTheTextOfTheLabel: (id) sender;
Be careful about those tutorials. Many are ancient and do not correspond to current Xcode behaviour.

Safari does not show url address line. google is taking up all the space...

Similar Messages

Maybe you are looking for