Safari doesn't display jpg when accessing the image from the browser

This is weird and very annoying. As soon as I click on an image to display it, Safari starts loading it and as soon as it's completely downloaded, it disappears.
For instance, when I click this link (http://www.digitaltrends.com/wp-content/uploads/2010/08/lg3d_oled500x375.jpg) I see the image appearing gradually and then when it's fully uploaded everything disappears and I'm staring at a white page. I can view it fine when it's embedded in the page, but not when I'm trying to open it.
I already reseted Safari (cleared cache, etc.) deleted the plist file and the webicon file in Library/Safari. Nothing works and I have no idea what to do... Help!!!

Ok.. so it's just limited to your account and not a system wide issue. That's a good thing.
Since you are running 10.5.8, make sure Safari is not running in Rosetta.
Right or control click the Safari icon in your Applications folder then click Get Info. In the Get Info window click the black disclosure triangle so it faces down. Where you see Open using Rosetta... make sure that is NOT selected.
Quit Safari. Go to ~/Library/Safari and move the Downloads.plist file to the Trash. Relaunch Safari and try again.

Similar Messages

  • Is it possible to get the image from the i pad when mirroring via Apple TV to fill the screen instead of appearing as a screen within a screen?

    When mirroring, is it possible to get the image from the ipad to fill the screen on the TV instead of appearing as a screen within a screen?

    Welcome to the Apple Community.
    No, the iPad has an aspect ratio of 4:3, a TV has an aspect ratio of 16:9, to fit one into the other is impossible without distorting the picture. If your TV has a zoom feature, you may be able to use this to fill the screen a little more to your liking, but this will result in cropping top and bottom.

  • Can BI Publisher read the images from the Database?

    Hi All,
    Can BI Publisher read the images from the Database?
    if yes how it can be achieved?
    Thanks
    Aravind

    Hi,
    There is an example in oracle db. Use the schema PM (Print Media).
    Select the corresponding table that contains the column AD_PHOTO.
    In your RTF template simply to print the image stored in the db use:
    <fo:instream-foreign-object content-type="image/jpg"> <xsl:value-of select="AD_PHOTO"/>
    </fo:instream-foreign-object>
    RUn the RTF template and it should show you all.
    Cheers
    Jorge
    p.s. If this answers your question then please grant the points and close the thread

  • I am downloading from a Canon 650D to Photoshop CS5.1 AND Adobe Bridge CS5.1  do i need to download a  DNG convertor? if so how do i get the images from the camera to the convertor?

    I am downloading from a Canon 650d  TO Photoshop CS5.1  and Adobe Bridge CS5.1  Do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?

    Please check the list yourself and co,mare the necessary CR version with the one your version of Photoshop utilizes. 
    If the version os higher than yours you can use the free DNG Converter – as to how to use it please read up on that.
    Camera Raw plug-in | Supported cameras

  • Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
    If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
    To remove the image capture preferences:
    If Aperture is running, quit Aperture,  and log off and on again.
    Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/  then hit return.
    In the window that opens remove "com.apple.ImageCapture.plist"
    and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture  something .plist  remove them too.
    then try again.
    And if that still does not help, remove the Aperture preferences as well:
    ~/Library/Preferences/aperture.plist
    Regards
    Léonie
    P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
    You can reveal it also  from the Finder's "Go" menu:
    Finder > Go,   then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

  • I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put ab

    I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images.  Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs.  What am I missing?
    Thanks,
    upsjdris

    Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
    You can set Aperture to import raw, jpeg, or raw&jpeg.
    If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
    Photos > Use Raw as original.
    Regards
    Léonie

  • Unable to save Word documents when accessing them directly from the site because the document never converts from a read-only even though the User chooses to enable editing

    Issue has only popped up recently and cannot reproduce in a Test environment.  Unaware of any SharePoint changes, so hoping someone can point me in the correct direction.
    Previously Word document did not have to be physically checked out, but rather the editing of the doc also checked out the doc in a document library. This is the way we want it to remain –
    no manual check-out process. Now if a doc is edited without being checked-out, there is an issue with the process as the application thinks the doc is read-only (message received when trying to save the doc) even if enable editing is selected. The
    following message appears when you try to save the document:
      This message can appear if you have been editing a file that was opened as read-only. A file opened as read-only will have (Read-Only) appended to the file name as it appears in the title bar of Word. You can still save the document, but you must
    save it by using a different file name. If you use Windows Explorer to change the read-only properties of the file, while the file is open in Word, it will not enable Word to save the file. Word must open a non-read-only version of the file in order to save
    it by using its original file name. If you have not made any changes to the file, you can close it, and then use the following steps to make the file writeable. 1. Click the File tab, and then click Open. 2. Browse to the file and right-click it. 3. Click
    Properties, and then clear the Read-Only check box. 4. Reopen the file. If you have made changes to a read-only file, you can save it, and then use the following steps to give the modified file the original file name. 1. Click the File tab, and then click
    Save As. 2. Enter a different file name, and then click Save. 3. NOTE: Adding "Rev1", or "Mod1" to the original file name may help you to remember it later. 4. Click the File tab, and then click Close. 5. Open Windows Explorer. 6. Browse
    to the original read-only file. 7. Rename the read-only file. 8. Browse to the new file. 9. Rename the new file to the name of the original file. Do not delete the read-only file until after you have determined you no longer need it.
    Previously, when check-out was optional, a file was checked out automatically when someone opened it for editing, unless it was already checked out. The editing commands notified the User that the file is being/was checked out.  The real issue is the
    word doc can no longer be saved as the application still believes the doc is read-only.

    Hi, 
    According to your description, you give the domain admin full control over files on the old file server, but you cannot move the files to the new file server. After pull the files from the old to the new file server, the domain admin can only read the files
    on the new file server.
    How did you move the files from the old file server to the new file server? Did you setup replication between the two file server or use robocopy? 
    Please check the files permissions on the new file server to see if the permissions are changed, then share the folder on the new file server to everyone to see the result.
    Regards, 
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Troubles in editing the images from the organiser

    Hi.
    I have a problem: when I see a picture in the organiser and I make a right click to open it in the editor, the editor starts but then there's no image, the screen is sadly green. How do I get my picture back ?
    Thanks
    Giorgio

    Hi ,
    Look s like the editor preferences are soliled. Please reset them. To do so , hold down Ctrl+Alt+Shift when you launch Editor from the welcome screen (the splash screen that you see having two tabs Organizer and Editor). You will be prompted if you want to delete the settings file. You do. Click Yes and proceed. See if it works for you now. Are able to view the image in editor after opening from Organizer now ?
    Thanks.

  • Safari unable to display icons when accessing a website hosted on Jboss 7.x

    I have a toolbar that consists of around 10 images(.png 16x16). Each of them not exceeding a size of 5kb. I am using GWT 2.4 framework. My question is, when I deploy the war in Jetty 8, the images seem to load just fine on Safari in ipad version 6.1.3. But when I deploy the same war in JBoss AS 7.x, the images don't seem to load at all and I can see a loading indicator continuously displayed on the top left corner in the ipad.
    Is there a way to find out why this is happenning. I have even configured the mime type in web.xml file. Can I connect to safari in ipad from mac and debug? AFAIK, that couldn't be done. Or am I mistaken? Please let me know.

    Hi, after trying for a bit I found the solution. The key is to use ClientBundle for image resource instead of specifying the images directly in your code. It is cleaner. Works perfectly in Jboss now! Still, I feel this should'nt have arised in the first place. When the same code works in chrome, why should safari be any different? Food for thought.

  • All the images from the webpages i visited was displayed with poor quality

    i have been using firefox for a long time this is the first time i'm experiencing an issue with firefox. i'm using firefox ver.37 with windows 7. i have tried all the settings in the firefox but no use. I'm also used the google chrome but it too have same problem

    It is possible that your ISP sends images compressed to speed up the transfer and adds a JavaScript to each page to make it possible to see images in the original quality.
    If you want to see the original image quality all the time then you need to contact your ISP and ask what to do to opt-out of that service or see if there is a FAQ about it on the web page of your ISP.
    *http://en.wikipedia.org/wiki/Web_accelerator
    *http://kb.mozillazine.org/Images_or_animations_do_not_load#Images_load_but_look_wrong

  • IPhoto Library is Synced onto my iPhone can i retrieve the images from the library off my iPhone, as the library file has been deleted on my Macintosh.

    Dear All;
    I currently have a issue with my iPhoto & iPhone, i apologize if this is the incorrect area for assistance.
    My iPhoto library has been synced with my iphone all my images/photos are saved onto the phone, but i want to put them back onto my Mac, unfortunately my iphoto library has been deleted (actual file). is there any way to achieve this?
    i have tried syncing the photos but i believe it will delete them, and update with my current library (no images).
    i have also tried to take the images off via iphoto & image capture but they only take newly taken images not the photos in the old library stored on my iphone.
    i am using an iPhone 4S, Macbook Pro 2010 & current version of iPhoto.
    Please advise if there is any way to move an iphoto library from iphone to mac.
    Thanks & Kind Regards
    Jordan.

    Correct, you don't want to sync.
    There are various apps that will recover images from an iOS device.
    http://macupdate.com/app/mac/24832/ipod-access-photo
    is one, but there are others.
    Regards
    TD

  • TS4253 I have over 100 photos, the unedited version of those photos is the only item that downloads onto Shutterfly or my computer. The Apple solution is to email each individual photo(over 100 of them)to yourself & then copy the image from the email  Ser

    I have over 100 photos, the unedited version of those photos is the only item that downloads onto Shutterfly or my computer. The Apple solution is to email each individual photo (over 100 of them) to yourself & then copy them to your computer? Really? This is the Iphone 5s, isn't it supposed to have great technology? It can't even recognize the photos on my iphone are all edited? Who has time to email over 100 vacation photos to get them correct? That is beyond acceptable from Apple.

    Please read this article about how to go about transferring photos from iphone to computer.
    http://support.apple.com/kb/HT4083

  • Display image from the save link in the field

    Hi all,
    I have a image link that saved in a column and will like this picture to be displayed once user is click on the image link in the tabular format.
    However, now I am facing the problem to perform query of the record because one of the field type is image or ole. However, if I changed the image link to normal text item. I am able to perform query search on the record. My question is, can I click on the record whenever I want to see the image from the tabular form ? I prefer tabular form as I can see a lot of records in one sort. But for the image display, I will like user to clock on the specific link in order to open up the image.
    Will this possible ?
    Thanks
    Lim

    If you are saving the image path in table not the image then why don't you use the READ_IMAGE_FILE built-in (see forms help).
    What i mean is hide the actual item which is having the image location. Just create one image item from toolbar (non-database) and create one extra button in the same block to display the image then use the READ_IMAGE_FILE built-in as below in WHEN-BUTTON-PRESS-TRIGGER...
    READ_IMAGE_FILE(:path_item_name,NULL,'image_item_name');
    Preferred way would be to save the image in database then query in your form using database image.
    -Ammad

  • How do i store and fetch image from the Database(Access)

    i am facing one problem in inserting the image into the database.the steps i followed as
    1)i have created one database(access) as "Image" and into that one table as "Image" and field as "image"
    type of the field is ole object.
    2)i have inserted one image into the image field through "database.vi"
    3)now i am trying to get the image from the database by "Fetching Example.vi"
    4)it will succesfully retrieve the image from that field .
    5)but when i close the both programs and reopen those that time i am unable to get retrieve the image.
    Attachments:
    Add_to_Database.vi ‏78 KB
    Fetch_from_database.vi ‏67 KB

    I would like to suggest different approach for saving the images in the database.
    I was working on Medical Imaging Company. The way we save the images in real-time was by writing the name and path of the images to database.
    The images themselves where saved directly to disk.
    I don�t think that access is very good in taking care of GBytes of data.
    It happens some time that the database gets damage. If you have the images separately you can create fix procedure. (We had one).
    Good Lack,
    Amit Shachaf,

  • I want to display the image with the help of servlet by specifying the url

    hi all,
    I am getting the Image from the Server to the Servlet (when i am using the physicalAddress ie c:/programfiles/......)it was getting the image but at the same time it was not displaying the image when i am using the URL address(ie http://localhost:8080/....)it was not displaying the image.
    I don't know what the problem is...what is the problem?
    can anybody give me the suggestion for fixing that.
    thanks in advance
    lakshman

    Hi,
    Invoice you will have the Purchase Order no. Display the purchase order through ME23N and at the item details you can find the GRN No. Or double click on the purchasing doc no. system will display the PO.
    Thanks
    VK

Maybe you are looking for