Safari don't open same pages

hi everyone,
       Sometimes i try to connect same web pages like http://www.ije.ir/articles/mypapers/ but safari says same error like "couldn't load the page because you may not connect to internet". At the same time i try to open the same page with another web browser and the the page is opened.
after a half an hour safari is able to open it. it happens a lot. even it happened with youtube. when i got a error tring to open a video with safari, but at the same time another webbrowser can open it. after i reflesh four or five times or wait 5-10 min. then safari is able to open the same video.
Do you have any idea what's wrong with my mac?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • My safari don't open certain pages

    Hello, I have a strange problem. I like to read newspaper in bangla language for example www.ittefaq.com.bd . My safari in the iPhone can easily open sites with bangla font but the safari in mac freezes with the rainbow circle every time i try to open any webpages with bangla font. I tried to install two bangla fonts still it's not working. Funny thing, even the google chrome doesn't open any bangla font in my mac.
    Please help me!

    BDBoy wrote:
    Safari suppose to show it properly
    No, OS X does NOT support Bangla out of the box.  You must install a font.  Did you try this one?
    http://www.ekushey.org/?page/osx
    Did you try FireFox?

  • Safari don't open some pages...

    Hi,
    I have a problem with some pages, safari tell me that the time of connection is over or did anythnk and bring me back to the first page.
    Do you know if there is some to activate in the preferences to not have this pb again?
    Thanks

    Welcome to Apple's Users Help Users Forums.
    Hi Ceelya,
    Glad the problem is fixed. You got some great help. You have rewards to hand out.
    As Bee said; "Scapesuiter & Cory helped you out quite a bit.
    Maybe you might want to rate their posts as "Helpful" or "Solved"? "
    Your appreciation Votes help our multibar folks keep going. Thanks.
    Gold Star = Helpful = 5 pts w 2 available and Green Star = Solved = 10 pts
    Quote from the emails Apple sends re threads:
    "===============================================
    IF YOU ARE THE AUTHOR OF THE ORIGINAL QUESTION:
    ===============================================
    When you return to view the answers, please mark responses appropriately. Simply login and select the value you desire for applicable responses. As the author of the original question, you may assign a helpfulness value to responses. Please use the following when rating a response:
    None: The response was simply a point of clarification to my original question or didn't really help.
    Helpful: This response helped with a portion of my question, but I still need some additional help.
    Solved: This response has solved my problem completely.
    WHY SHOULD I DO THIS?
    In short, here are 3 reasons why it's worth a few moments of your time:
    1) Other members have taken time out of their day to assist you, so please take a moment to give them credit for the assistance they have provided.
    2) Your rating not only helps your peers earn points toward their status in Discussions, but validates the quality of the solution you've received.
    3) Other readers will be able determine which response(s) helped solve the original question, which will greatly enhance the knowledge and experience for all community members and visitors.
    ===============================================
    We appreciate your participation in Apple Discussions. Thank you for being part of our community.
    Apple Discussions Team"

  • Safari can't open the page https

    Frustrating to say the least. About a week ago whilst in Google mail, Safari failed to open an email instead it opened a page displaying the message Safari can’t open the page “https"//mail.google.com" etc
    A page refresh also failed to open the page as did a my attempt to "Sign out".
    Later that day the same problem occurred when I was using my bank's website. Oddly, when I turned to Camino and it too failed to open Googlemail and the bank's site. On my MacBook both sites worked from both applications. Add if I use a different user account on my Mac Pro, I don't have the problem.
    My account is a “Standard” user. A logout and back in and it works again, a reboot and it works again but after a couple of hours the problem returns:
    Any help welcomed as the following steps have failed to resolve the issue:
    Empty Safari cache
    Reset Safari
    Uninstall Safari 4.0 beta and re-install Safari 3
    Re-install Safari 4.0 beta
    Swaped ethernet connection on my Mac Pro
    Verify Disk Permissions
    Repair Disk Permissions
    Delete website history with "Adobe, Website Storage Settings panel"
    Reset router
    Rebooted Smoothwall
    ClamXav found nothing
    DNSChanger Removal Tool found nothing
    iServices Trojan Removal Tool found nothing
    removed .GlobalPreferences.plist
    Thx
    John

    Hi John
    Google Mail has been problematic on Safari 4. There are a number of threads in the Safari 4 Beta forum addressing the issue.
    Thanks for posting the steps you have taken so far.
    In a broader sense, security certificates are at the root of secured sites functioning. Those certificates are part of the Keychain file in HD>System>Library>Keychains. Perhaps, the keychain file needs repair. Open Keychain Access in your Applications>Utilities folder. In the Keychains Menu, select "Keychain First Aid">repair. If any errors appear, rerun until you get a clean pass.
    If no errors appear, you may have to reestablish the keychain entries in your Standard account. Do you have administrative privileges assigned to that account?
    Also, I'm not familiar with Smoothwall's operation/setup, however, some tweaking of its settings may be necessary. Here's some dated technospeak about Smoothwall and Safari.

  • Safari won't open any page

    I'm using 7.0.5 Safari on Maveriks
    Safari won't open any page, unlimit loading... ... ...
    Chrome and other browsers - working good, no errors.
    App Store and Updates - work well
    No network issues.
    Safari - clear cache and reset safari - didn't work.
    hosts file is ok
    no extensions
    delete all plug-ins except default ones.
    hm.. what else...
    apple extreme wifi router - work's well.
    Other devices at home has internet on it, other macbook pro doesn't have a problem with safari.
    in console - no errors
    any page won't load in safari, just a white screen and loading progress..
    What should I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Safari can't open certain pages, can't find the server

    Hi
    On both my iMac and iOS devices (all connected to same Airport TimeCapsule Wi-Fi network), certain web pages won't open in Safari (specific example www.amazon.co.uk).
    Safari returns the message "Safari can't open the page "www.amazon.co.uk" because Safari can't find the server "www.amazon.co.uk"".
    Opening other pages works fine.
    Have tried Safari option "Clear History and Website data" (all history) without success. Have also tried rebooting the TimeCapsule (disconnecting power cord), also without improvement.
    When trying to connect to the same website over 4G on iOS device, no problem occurs.
    Can anyone help me?
    All software on all devices are updated to latest versions.

    Back up all data.
    Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
              8.8.8.8
              8.8.4.4
    That's Google DNS. Click OK, then Apply.
    In Safari, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. If you’re using another browser, empty the cache. Test. Any difference?
    Notes:
    1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the  Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
    2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

  • Safari won't open a page

    Hey!
    I've got a big problem: My Safari wasn't able to open a page. So I decided to uninstall it. When I installed it again I still had the same problem as before:
    Safari won't open a page. Even not google.de or google.com
    Firefox works perfect, it's only Safari...
    Is there anything wrong with the Internetoptions? I'm connected wireless with an airportExtreme since two weeks. I don't now if it was working before...
    Anyone knows a solution? : )
    Thank you...
    Björn

    ok, i've found the problem myself... The app piclens made the problem... now it's working fine : )

  • Safari can't open the page on mac

    Safari can't open the page. The error is the operation couldn't be completed. Operation not permitted. Please help urgently. Thank you

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Ipad, Error message "Safari could not open the page"

    Hi... I am getting the error message "Safari could not open the page because the server stopped responding" 
    I have read the previous replies to this error message and have made sure the Ipad is connected to internet (skype works fine.)
    I have also done a hard reset on my Cisco router.
    I have Reset Ipad to factory settings twice.
    I have Reset network settings five times
    I have Powered off and on five times,
    turned wifi off and on countless times.
    Any idea other ideas? Ipad was bought in US 3 weeks ago.  Worked fine at hotel in mexico.  I am now in Bolivia.  Different countries screwing it up? Could my router be too old? My Mac and iphone work fine on it though, although they are also old and since my macbook refuses to update it runs on OSX 10.5.8
    Thanks, your help is immensely appreciated.

    Can you connect to the internet using other WiFi networks? Have you even tried outside of your own home WiFi network? Have you tried anything I here yet?
    iOS: Troubleshooting Wi-Fi networks and connections
    Occasionally I get this message in Safari but I also can't get online with any browser when I get the message. What I always do - and it always works for me - is to close all apps on my iPad and reset the device. I don't know if closing apps has any real effect or not. Most likely is it the system reset that brings it back to normal behavior.
    Due to the fact that you have restored to factory settings twice already, I can't believe that resetting the iPad would do any good at all. But you are getting nowhere anyway, so try it if you like.
    In order to close all of your apps, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Since upgrading to Yosemite I am getting frequently "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again"

    Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
    I am also noticing page load very slowly when this problem is not occurring.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • HT4623 safari could not open the page because the server stopped responding

    purchased ipad 2  two weeks ago everything working fine but today problem with wi-fi connection as safari comes up with a message  could not open the page because the server stopped responding, but my desktop and laptop working off the same wi-fi are connected to the internet fine.
    can somebody please help me

    I have this same problem now.   Works fine on Wifi, but if I try to access the Internet on 3G I get the same message  :
    "Safari could not open the page because the server stopped responding"
    I can use WhatsApp & my Gmail works, so I am accessing the Internet, just not able to browse...
    Strange thing is.... I'm using a 3 (Three) SIM.  If I switch to my Giffgaff SIM, it works fine.  Swap back to 3 & I get this message.
    I have re-booted & done the "Settings>General>Reset>Reset network settings" several times.   No effect.
    Any ideas?

  • "Safari can't open the page because it can't find the server"

    I just bought my iPhone. The first time I attempted to log onto my home wireless network (US Robotics Wireless Router) the iPhone performed perfectly. However, the next time I attempted to logon and surf it gave me the "Safari can't open the page because it can't find the server" error message. I tried a variety of things which didn't work. I called the Apple Tech Support. Turning off the router and rebooting it was the only thing that worked. I thought my problem was resolved because after cycling the router the iPhone worked great once again. But . . . later the same day I attempted to connect to the router and the same thing happened and I got the error message. I attempted to power cycle the router just like before but this time it did not work! Help! Bad router? Wrong settings on router or iPhone?

    Do you have other wireless devices connected to this same router? Do they work?
    I really can't help you much but to say that when my router exhibited this issue it was accross the board (all notebooks would connect immediately following a router restart, but would loss connectivity until I rebooted the router again). In my case the only solution that was permanent was to replace the router.
    You may also try restarting the phone and the router, setup security - WEP - (or disable security) on the router and phone, and/or try a different wi-fi channel (may actually help).

  • TS1398 hi my ipad is connected to my wifi but it keeps coming up with safari could not open the page because the server stopped responding its saying this know matter what i try to open what am i doing worng please help

    my ipad will not load any pages an after about 10 mins comes up with safari could not open the page because the server stopped responding but iam conected to wifi please help as i have been trying for 2 days now and is doing my head in

    Does the iPod connect to other networks OK?
    Do other devices now connect and work OK?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Safari: "Could not open the page, too many redirects"

    IPAD -  Safari: "Could not open the page, too many redirects"
    Only one site - but this site works great on other IPAD

    What I have done - with no positive results:
    Settings  |  Safari  |  Clear History  |  Clear cookies & Data
    Also used different WIFI networks

  • Unable To Use Internet/Safari Could Not Open The Page Because The Server Stopped Responding

    Hi
    I having a problem while opening safari on my iphone-4  the error message "safari could not open the page because the server stopped responding"
    But i have checked router side, no problem found because router is working with other device laptops and other devices,
    if any one know the issue, please help me....

    I am having the same issue. Its says that the server has stopped running. THis has gone on for three days straight. First time it fixed it by powering down the unit, the next time it worked resetting the network settings. Now its happened again and these two options do not work either. What do I do or what could be wrong??

Maybe you are looking for

  • Call tcode KSB1 in a custom program and modify its output

    I was searching the forum for finding a way to create a program that has all details from KSB1 and some details from CJ13 (WBS details) and found some related posts. But none of the posts had any details on how to actually achieve this. I have to do

  • Music not playing in car when it used to...

    I have been using my iPhone in my car for the past 8 months. It's an integrated system within an Infiniti. Today, when I plugged in the phone, it said that the iPod was not connected. It was. I unplugged and plugged in again. Same message. Then, I un

  • Changing default headlines etc?

    Hi! I'm fairly new to the iLife softwares and I'm currently making myself a webpage with iWeb. My question is if there is anyway you can edit the default actions in iWeb? for instance whenever i create a new Blog entry i get a default text, default i

  • Uncontrolled expansion of a system slide control

    I have two system slide controls (part of a larger cluster) that are getting longer by a few pixels every so often without me touching them on the front panel.  I don't know what this is correlated to (i.e. opening the .vi, running the .vi, etc.) but

  • Gmail for Curve

    Is there a way that I can sync my Gmail calendar to my Blackberry Curve WITHOUT receiving actual emails? I just want my calendars to sync.