Safari don't respond...

My safari hasn't worked properly some times. My MacBook is a couple of weeks old and started surfing a few weeks ago and about three times now I had to shut it down, because safari doesn't respond!
What may affect this problem? Is the problem the computer or...
Thanks!

Hi!
No particular sites except for yesterday when I tried to login to see a film at udini.de...but this time I think It had to do with the site because it happened two times.
Then we have the other two times and it was when I visited http://bleau.info and one time when a login at hotmail.
I always click on safari with ctrl and it pops up that safari doesn't respond...should I hold for a minut or two and see what happens?
Can it be my conectin to the internet or is the problem in the MacBook?

Similar Messages

Apple applications don't respond

Hi,
I have an iBook G4 running 10.3.9.
My main account, the admin account is corrupted. Apple apps don't respond. Mail, Addressbook won't start. Safari can't connect to the internet, endless rotating wheel. System preferences not responding. It happens only with my main admin account. I set up a new account to be able to access mail and the web and it works with that. I also set up a root password and i can log in as root admin and that works as well.
I tried to repair disk permissions. No luck. However i couldn't run it from the corrupted account since disk utility didn't respond there either.
Do i really need to wipe the disk and install everything from ground up? Or there are other ways to fix this?
Or can I delete my corrupted admin account and create a new admin account?
Thanks,
Luke
iBook G4 Mac OS X (10.3.9)

See if the following is helpful:
Originally contributed by MacJack:
1. Navigate to YourHome/Library/Fonts - drag this folder to the desktop.
    • Restart and test your applications.
    • If they work start adding the fonts back few at a time.
(Likely suspects are TimesRO & Helvetica Fractions, also if you do not use Classic you can trash the classic fonts.)
2. Check Preferences Thoroughly:
    • Go to Users/Your_Name/Library/Preferences and trash the files:
    - com.apple.ATS.plist
    - com.apple.BezelServices.plist
    Restart. If this did not help, go to Users/Your_Name/Library and drag the folder Preferences to the desktop. Restart and see if this solved the problem
    • Navigate to YourHome/Library/Preferences drag this folder to the desktop.
    • Restart and test your applications.
    • If this works, save the old preferences folder somewhere else or on disk, name it "old prefs."
** Note: A very important file is the "com.apple.Mail.plist" preference file located in the Preferences folder which contains all email account settings and general mail preferences (hold this one and replace if your problem is not with Mail).
You'll have to go through some of your System Preferences and apps to set the preferences back to how you like them. (Or if you have the time and inclination, "cherry pick" through until you find the problem one or two.)
3. Check Permissions Inside Home Folder
    • Navigate to yourhome/library.
    • Get Info (Command + i) on the "Applications Support" folder.
    • Open the "Ownership & permissions" disclosure triangle.
    • Make sure you are the owner, with "read and write" access.
    • Click on "apply to all"
    • If this is correct, open the "Applications Support" folder and do the same procedure (Command+I) for the folder names of the applications with which you are having trouble.
Note:
The reason to check this is because repairing permissions with Disk Utility doesn't touch permissions inside your home folder.

I am on Software Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?

I am on Software Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
Graphics NVIDIA GeForce 8600M GT 256 MB

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same probl

Same here, 4s working perfectly, downloaded update 8.0.1 Now no wifi or bluetooth or hotspot. Control on/off icons are muted in colour and don't respond. Tried resetting network connections then total restore, didn't work so still have the same problems as before.

Satellite L505D-S5983
I would try another restore of the hard disk to its original out-of-the-box contents using Toshiba recovery media. Maybe something went wrong in the process. Make sure everything works before applying any updates and adding any hardware or software.
Then add things carefully, rebooting Windows and testing the USB and audio at each step.
Please note this.
The only info windows gives me for the sound card is that it from Microsoft... with a driver version of 6.1.7601.17514....which naturally doesn't really help me since I have no idea what card or mobo I have . Is there any way for me to find out what I need other than opening up my laptop?
Every one of them lists my mobo simply as a Toshiba motherboard, with no audio card information. Which I'm assuming that is because it has an internal sound processor. My problem is that none of the properties, or ANYTHING I try, will give me information on what I need to fix this...
All of the latest drivers for your model are easily found here. This one is for the sound.
Realtek Audio Driver for Windows 7 (32/64)
-Jerry

Webmail in Safari don't work after updating to iOS6.

Webmail in Safari don't work after updating to iOS6. Logging on to office webmail account are redirected. Webmail works with Google Chrome, but it doesn't sove the issue with Safari. Any suggestions on how to configure Safari?

Try this
I was having this problem, seem to happen when waking computer, once finally connected network works great.
You need to edit your network preferences to order the network selection list. Goto this support page Using network locations (Mac OS X v10.6 and later) and edit your selection list.
I also created a "HOME" location and deleted all networks except wifi. Put MB to sleep woke and safari worked great. Still I re-ordered the networks under Automatic putting wifi at top, sequence is from top down. Don't forget to click Apply. Have fun

Programs don't respond with ipod plugged in

This is really a pain. Whenever I plug my 30gb 5G ipod into my computer my programs don't respond. This makes it impossible to put songs onto my ipod. I have tried reinstalling itunes and the ipod updater and restoring my ipod, but it only makes it so that itunes doesn't read my ipod. please help.
30 gb. 5th G Windows XP

I don't know if this will fix the problem, but here it is:
1. start the macbook up normally w/o the iPod plugged in.
2. right after u hit the power button hold down the button combination "s" and "command"
3. do not let go until the screen goes black and white text is on it. when the text stops moving there will be a prompt.
4. type the following text WITHOUT QUOTES "fsck -f"
5. then when it is done do that same thing again.
6. then try to exit type the following text WITHOUT QUOTES "reboot"
7. then try to reboot with the iPod connected
if that does not work take it into a apple store.

HT4859 I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.

After using the right mouseclick safari doesn't respond to any mouseclick

Hi since updating to safari 5.1.1 after using the right mouse click safari doesn't respond to any mouseclick anymore. I can use the keyboard and select menus but that is it. Reinstalled Safari, resetted safari and removed all preferences, caches and disabled all extensions etc. nothing helped. Any suggestions here?
Im using snow leopard, on a dual core mac Intel xeon desktop.

Solved it finally after a long time.. I was triggered that another user on the same system did not have the problem I scanned my user library folder: The problem was an old safari extender plugin in my Contextual Menu Items folder. After removal all is working again :-)

How can I set the time between how long my phone plays a text msg ringtone if I don't respond the first time?

If I don't respond the first time, how can I set how many times/seconds it plays the next time until I respond?

Actually, there is!
http://www.apple.com/feedback/iphone.html

HELP - My mail and safari don't work

Hello,
I need help. My Mail and Safari where very instable. Sudenly they stopped working. I click in the icons on the bar and they don't open.
yesterday night I did an "Archive and Install" instalation. This instalations just installs the operational system again and leave the rest intact.
It worked perfectly. I went to sleep at 3 AM with everything working.
I woke up and again the mail and safari don't launch.
I did the "Archive and Install" instalation again and the mail worked once and Safari didn't.
I just don't know what to do.
The system I have is OS X 10.3.5
yesterday after installing the system I did the update to 10.3.9
everything worked.
Today when I woke up and they wheren't working again I did the instalations again and didn't upgrade. Didn't work.
Does someone knows about this happening before?
HELP
thank you for any help you can give me
january river

january river,
Welcome to Apple Discussions.
Follow the troubleshooting checklist listed in Multiple applications quit unexpectedly or fail to launch, by Dr. Smoke and let us know what happens.
;~)

Buttons don't respond sometimes/scroll bar slow

I have iPod nano that's approximately 2 years old. Buttons sometimes don't respond - have to push repeatedly and then will eventually respond. Also scroll bar is slowing down although does work. Dying or is there a fix? Any info would be appreciated!

The most common trouble shooting solution is to force-quit the Music app. See if that works for you.

Volume controls don't respond

I have the Imac OS X 10.5.8 core 2 duo.
Just bought a new Apple Keyboard with Numeric Keypad,
because my previous one was broken.
But the volumekeys, the keys to switch songs and the '@' key don't respond/work.
Is there a way to costumize them?
Thanks a lot!

I had the same problem as well for nearly 3 months.
I had tried bring the Iphone into my phone carrier and they sent me to the AppleStore. When I brought it to them they hooked it up to the diagnostic machine and they told me just to restart the Iphone from the factory settings.
This didn't work either. To complicate things more, other "solutions" seem to only yield temporary success. These temporary solutions included: blowing compressed air into every port, various restart combinations, various factory restore methods.
I had nearly given up until I stumbled upon a support post on Apple's website that finally yielded success.
http://support.apple.com/kb/TS1630
The solution for me is listed as line 7, which reads:
"Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris."
Apparently, this cylinder shaped, mesh area is in some way tied to what triggers the headphones/speaker selection. I am not sure how, but I can say that after gently brushing it out my sounds are working again; specifically my music is now able to play directly off the speakers and my Iphone apps all play their sounds agian.
Hope this helps you as well!

Function Keys and Power Commands Don't Respond

I've encountered an odd intermittent problem with my iBook G3 900. On certain boots the following issues crop up:
- Function keys are non-responsive. Expose, Volume, Brightness, and Eject all stop working.
- Power button doesn't respond. Also, software power commands don't respond. The only way to shut down the system is to do a force shutdown by holding down the power button for four seconds (or other unpleasant things like unplugging the power and the battery, which I refuse to do except under the most dire circumstances).
- "About This Mac" refuses to load. Sometimes I see the window appear, but it parks itself at the top left of the screen where I can't get to the window bar, and Expose obviously doesn't help.
Now as I said, this problem is intermittent. It only seems to occur on certain boots, but it's incomprehensibly annoying when it does appear. The iBook is a secondary system, so I have barely anything on it and I don't do anything crazy with as far as software goes. All I know is that the problem appeared after I rebooted after installing SideTrack, but try as I can I can't seem to link my problem with aforementioned app. If the problem does assert itself, I force a shutdown, and it goes away on the next boot.
Any thoughts?
iBook G3 900 Dual USB Mac OS X (10.4.7)

Hi, and welcome to Apple Discussions.
One of the first troubleshooting procedures to try when you are seeing operational anomalies is to reset the PMU.
What is the hard drive capacity and how much space remains available on it? Sometimes strange things start to happen when you get down to less than 5 GB of free hard drive space.

My tackpad don't respond to click after reinstall OS 10.5.7

Hello :)
I just finish your answers about tackpad problem and I tried all your suggestion.
The problem is
I had a mid 2009 macbook pro 13 inch with Leopard 10.5.8 OS
Yesterday I mad a decision to erase my HD and reinstall the OS again ( for no purpose ... Only I didn't do this before so I needed to re frish my Mac and would think for system upgrade )
I had the OS installing DVD with version 10.5.7 ( older than the original version on my Mac )
During the installation ; I noticed that the tackpad don't respond to any click .. Only move around normally with my moving finger but no response for clicking .. I assumed that this is normal during the installation process and will be OK after the finish .. So I used keyboard to complete the process
I realized after finishing that the problem still present ... I assumed that that is a software problem due to the older version I have or something ... So I reinstall the OS again but with the same problem
I searched the web for a solution and I noticed that a lot of people had the same problem when the upgrade the system ( that is similar to what I have )
I am afraid that it would be a hardware problem especially I live in a place with nearly no Mac expert or stores
What should I do ?!!!!!!!
Take in consideration that : the click was normally functioning before I reinstalled the OS .... Also I tried every solution from restart and SMS reset but with no response ... I didn't use a USB mouse yet and don't prefers to remove the battaries ...

hey BDAqua
please another request
every time i try the application installing dvd it gave me a message ( failed ) ... i tried it after update the OS
1 ... is the upgrade maybe the cause of this message ( from 10.5.7 to 10.5.8 ) ???
2 ... is there is a way to reinstall this application bundle online from apple servers ?!!!
3 ... what are these applications ? are they very important to the OS ??
thank you in advance

Built-in audio inputs and output don't respond to anything.

Hi there,
Maybe somebody can help me, I have a macbook pro os x 10.8, and i'm having a bit of problem.
I connected a cable to the line input, and before i had a chance to balance the high volume the whole software in the system preference froze, and now the built-in audio inputs and output don't respond to anything, also in the audio MIDI setup menu. The volume button moves extremely slow, and there is no sound at all. Anybody has any idea?
Thanks in advance

Apple store genius bar seems like you best bet.
Ciao.

Safari don't respond...

Similar Messages

Maybe you are looking for