Safari downgrade from 3 to 2 problems?

I recently upgraded to the Safari version 3 beta and found it to be too buggy - especially as regards its inability to handle PDFs and the fact that it is incompatible with eBay UK - and I finally had to give up on it, uninstall and go back to version 2.
Now I find that pages on my own website, which redirect to a login page, which worked flawlessly before, now do not work at all and I get this error: "The error was: “lost network connection” (NSURLErrorDomain:-1005)"
Does anyone know if downgrading back to version two causes problems, because now my beloved Safari seems to be broken!?
Cheers,
PeteBell UK

Hi
The "error" message for Apple Discussions is a problem that has been going on for the past month. After logging-in, the Error page appears. Go back to the original URL and select it again. The correct page will now load.
Specific to your other problem, back to the Finder, drag to the desktop the com.apple.safari.plist folder found in your User Account>Library>Preferences folder.
Restart Safari. Select your URL. If this works you'll need to reset your Safari preferences to your liking, plus any custom settings found in the Edit Menu (spelling) or View Menu (status bar, bookmarks bar, custom icons in the "Customize Address Bar" ).
Otherwise, move the original file on your desktop back to its original location.
Post back

Similar Messages

Upgrade Safari 1.2 to 1.3.1 after downgrade from Tiger to Panther

I wished to restore performance to my G3 iBook by downgrading from Tiger to Panther, and have been successful with that and have restored all apps to Panther versions except for Safari. The downgrade (archive and install) left Safari 2.0 on my HD for some reason, which of course wouldn't launch under 10.3.9. I dragged Safari 2 to the trash, downloaded Safari 1.2 which installed fine. However when I try to upgrade now to 1.3.1, I am told by the installer that the software cannot be used with the disc volume (the system volume) I choose to install to.
(BTW, invoking Software Update says my software is all up to date, even though I'm only on Safari 1.2.)
I've seen the other threads which have suggested removing Safari pkg receipts from /library/receipts, but this hasn't helped me in this case; I can't find any thread that had a successful resolution yet. Anything else anyone can suggest? Many thanks.
iBook 12" G3 800 Mhz Mac OS X (10.3.9) downgraded from Tiger
iBook 12" G3 800 Mhz Mac OS X (10.3.9) downgraded from Tiger

Mark:
Welcome to Apple Discussions.
You can try using Pacifist to extract Safari from your install disk and install it. You may then be able to upgrade it more easily, although I can't promise that for sure.
Unless you are absolutely wedded to Safari, I find Camino to be at least as good (I think better) as Safari, and looks almost identical, so that there should not be much of a learning curve. I also use Firefox and especially like it for the measure of security it provides.
Please do not hesitate to post back with further questions or comments.
Good luck.
cornelius

I want to downgrade from ios7 on my ipad mini-it seems to have affected certain websites which I now can't access due to 'redirect' problem

I want to downgrade from ios7 on my ipad mini-it seems to have affected certain websites which I now can't access due to 'redirect' problem....

Google is your friend. You have to move very quickly on this. It can't be discussed how to do it on this site and is not supported.

Iphoto problems after downgrade from Yosemite to OSX 10.8.5

After a successfull downgrade from Yosemite to 10.8.5 Mountain Lion my ( 'old Yosemite' ) iPhoto backup is not compatible with iPhoto reinstall.
Is there a way to repair or fix this problem?
My patience involving the dramatic Yosemite 'upgrade' is tested to the max I need to say.

Welcome to Apple Support Communities
OS X Yosemite uses a newer iPhoto version than OS X Mountain Lion, so it is normal that you cannot use your iPhoto library in Mountain Lion again.
Maybe you will not like what I am going to tell you, but have you tried a Yosemite clean install instead of an upgrade? A lot of users have reported problems with the upgrade to Yosemite, and a clean installation fixes all these problems, because you are going to format the hard drive and install OS X Yosemite as new. I recommend you to try this.

Our iPad have problem ,ios7.1 is not proper function, our iPad is iPad 3 wifi 3G ,so I want to downgrade from ios7.1 to ios 7.06.

I want to downgrade from ios7.1 to ios 7.06.my iPad is ipad3 ,now present ios is update ios7.1 ,it is a little delay.so I want to back ios 7.06.

Not possible.

Downgrade from Mavericks to Mountain Lion

I am considering to downgrade from Mavericks to Mountain Lion, and understand I would loose the maps app and some features... but is it worth it it so I dont have to continuously reboot my mac, so I can use a program every time ?
The problems I am having with mavericks, even when I have done a few tweaks , is that after running a few programs such as mail, safari, garageband first and then loading photobooth... photobooth or any video app tends to lag , and the video is recorded lagging. A reboot fixes this if i start the program after reboot and not run any programs before.
Another issue is when I am doing my artwork, drawing in photoshop or manga studio... the pen tablet begins to lag as well, so I would have to save my work, reboot and then continue working until Mavericks starts misbehaving again.
This mac had its drive wipped clean before It became my personal mac, and I requested Mountain Lion, since I prefered it, but Mavericks was installed.
I dont mind Mavericks... its just this rebooting to fix or refresh system... is getting annoying when I need to get some artwork done.

Hi qldfirey,
I'm sorry to hear that you have had issues trying to work with your Officejet 8600 since upgrading to Mac OS X 10.9.
I have included a link to the full feature software for your Officejet 8600 printer in Mac OS X 10.9. If you still have the driver from your previous operating system loaded on your Mac please uninstall the printer before installing with the updated driver. I have included a link with the steps to uninstall.
Officejet 8600 Mac OS X 10.9 Full Feature Software Driver Download
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-125213- 1&cc=us&dlc=en&lc=en&os=4159&product=4323659&sw_lang=
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02440673
Happytohelp01
I work on behalf of HP

Downgrade from Yosemite using Time Machine

Hi,
I am planning on downgrading from Yosemite back to Mavericks because of the fonts/resolution debacle, I am partially sighted and use the Accessibility function Zoom and the thin, grey blurry fonts are made worse by the magnification process which means I am having great difficulty just doing simple things like reading emails and using Finder windows, I have tried checking the 'Increase contrast' option in Accessibility>Display and the 'Use LCD font smoothing...' option all to no avail, if only Zoom worked like 'pinch to zoom' in Safari (I use a trackpad).
Anyway my question concerns using a Time Machine backup to downgrade, I have two external HDDs one for TM backups the other containing my iTunes media folder which is also backed up by TM, can I disconnect the iTunes media folder HDD before I restore from TM or will there be an issue if TM has to also restore the iTunes media folder ?
I hope this makes sense.
Thanks in advance
Pete
2012 iMac 27"

If you upgraded to iTunes 12, there may be a problem with iTunes media if you didn't have iTunes 12 in Mavericks.
Revert to a Previous OS X

Windows XP Pro SP2 cd-rom after downgrading from Vista

Hi everybody.
I successfully downgraded my T61p from Vista to XP Pro SP2 using the downgrade cd-roms send by Lenovo.
Everything seems to work well. I downloaded all drivers. No problem.
But I recently installed a rather old software that I frequently used on my old A31p. This software (a Microsoft program !) has automatically modified some files from XP Pro without any autorization.
Once it was done, I was asked by the system to insert the original Windows XP Pro SP2 cd-rom to repair this modification.
Of course, the (Vista to XP) downgrade cd-rom set was not recognized by the Thinkpad as the original XP set.
An original cd-rom which I finally don't have !
I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful.
Where could I find the XP Pro SP2 cd-rom corresponding to the downgraded system ?
Thanks for your help and suggestions.
Regards.
J.L.
Jean-Louis L.
Thinkpad A31p - T42p - T61p - TP Tablet

James,
thanks for your answer.
But I wrote on my first post "I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful."
Thus, I don't see any difference between an original Microsoft Windows XP2 Pro SP2 version cd-rom and one created by burning a downloaded version of the OS. An original was not recognized, what would a copy do ?
If possible, it might be probably better to create an XP Pro SP2 cd-rom from the "Rescue and Recovery" files which were reinstalled when downgrading from Vista to XP. (I hate the word "downgrade" : while I was doing it, I had the feeling I was upgrading my Thinkpad !)
I have been using for several years (and still use) an A31p (Since 2002, 8 to 10 hours a day) and a T42p. IMHO, the T61p is the same category of "great" notebooks. Thinkpads are really the best notebooks I have ever used. I noted no significant difference between IBM and Lenovo Thinkpads.
Jean-Louis L.
Thinkpad A31p - T42p - T61p - TP Tablet

How Do I Downgrade From Windows Vista To XP On A 3000 N100 Series Notebook?

Hello. Here is the problem. I have Windows Vista Pre-loaded on my 3000 N100 Notebook, absolutely dislike this operating system and want to erase and load Windows XP. From reading other forum messages I have learned several things.
1) The install disk On Windows XP Home & Professional will not recognize Sata Hard Drives, when it reaches the point of loading where it looks for the hard drive it "BOMBS OUT" with error messages.
Several options are open .............
1) Log into the BIOS, locate the SATA option, and change to compatibility mode.
2) Have a USB external floppy connected with a Sata Driver on it and when installing Windows XP press the "F6" button when Windows asks for any external drivers you want to load.
Here is the problem with the 3000 N100 Notebook series..........
1)There is "NO SATA OPTION" in the BIOS of the 3000 N100 series notebooks to choose. In this model Lenovo stripped the BIOS down to the bare essentials.......and I Do Mean.... "BARE". The latest BIOS upgrade also has no Sata option. Why they did not offer at least this choice of downgrading to XP is beyond me. LENOVO..... I'm not impressed with your notebook. As usual.... Microsoft has all vendors jumping to their tune..... Nothing but "VISTA" at this point in time. What if you hate it??????
2) I have hunted all over the Lenovo Web Site for a "SATA DRIVER" that would work with a 3000 N100 Notebook, no such critter exists. LENOVO..... Couldn't you have at least offered this???? I'M NOT IMPRESSED.
Has anyone been able to downgrade to Windows XP successfully on a 3000 N100 Series Notebook??? How Did You Do It?? Has Anyone Located A "SATA DRIVER" That Works??? IF So, Please Explain To Me Step-By-Step How I Can Get Rid of Vista and Load XP.
Help........Help.......Help........Help......Help!!!!!!!!!!!
Regards

Hello Himleung. Thank you for answering this message. Where did you find a "Sata Hard Drive Driver" that works?? Perhaps you could pass that along to this message forum in case someone else that has a 3000 N100 (may also work with the N200 series) Notebook wants to downgrade from Vista to Windows XP.
This is what baffles me to no end. The Lenovo web site has every driver you need to load Windows XP on the notebook.....**EXCEPT**..... the Sata HD Driver......**OR**...... the ability in BIOS to change to "compatability mode". Duh!!!..... whats wrong with this story. I have never seen such a weak BIOS as the one in the 3000 N100. If I had known this I probably would have gone to another brand. They should have advertised this notebook as...... "Non-Geek Compatible".
Not knowing exactly how you could forward the driver to me I did the following....... I created a new Web email location that you could use to send the driver as an email attachment. The address is....... [email protected] This address will exist just long enough to obtain the driver..... and then......"Hasta-La-Vista" baby......end of story......as I do not want to be bombarded with ads, trash, or perhaps a virus of some sort..... although.....I'm SURE we have GREAT PEOPLE on this message center.
I'm not familiar with the "NLITE" program you mentioned. Again....perhaps you could mention where I can get it and what I need to do to set the program up to run the driver.
Thanks again, Himleung.
Regards,
Train500

15-f019dx downgraded from windows 8.1 to windows 7 home premium 64 bit: need drivers

Hp Pavilion 15-f019dx downgraded from windows 8.1 to windows 7 home premium 64 bit.
Stopped:
Internet driver
Wireless
USB controller
Network Controller
PCI Device
PCI simple communications controller
SM bus controller
maybe other stuff I haven't noticed?
I see others on this forum have had similar problems going back to windows 7. I tried some of their driver solutions that were posted, but to no avail. Can I get some help? Maybe some links to where I can find drivers to help me? Windows update cannot find and automatically install replacement drivers.

Hi:
Looking at the hardware specs for your model you should be able to use all of the W7 x64 drivers and software from the HP Probook 450 G2 on your model except the BIOS and firmware files.
Your model uses the Intel HD graphics driver and the Realtek RTL8188EE wireless card driver.
http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4058

How to downgrade from ios 8.0.2

how come there is no way to downgrade from ios 8.0.2 to ios 7 !!! i don't think its legal from apple to close the way back
but let me ask may be there is something i don't know
is there any way back to ios 7.1.2 ????
thanks
kh

There is no way to downgrade. Apple probably doesn't allow it because then people would downgrade a lot. People rarely like the new update when they download it. Also, Apple doesn't support past iOS things…So if someone is on iOS 3, Apple wouldn't support fixing problems or whatever (if I remember right).
So, sadly there is no way to downgrade. Sorry!

How to downgrade from iOS 8.1.1 to ios 7.1.2

How to downgrade from iOS 8.1.1 to ios 7.1.2

I think the best iOS version for iPad mini 1st gen was 7.1.2.
I use my iPad with music production software and still it was on 7.1.2 I got no problems, but now I'm in trouble using AudioBus for memory problems when I record to a DAW. Synth softwares are laggy, many crack here and there, like it has no more power to reproduce all the voices I need.
Really the only way is the jailbreak? 8.1.1 is not optimized for older devices: the update had to be not released through iTunes.
Bye.

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHz

Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

My ipod will not downgrade from 5.0 or 4.3.5 to a 4.3 4.2.1

my ipod will not downgrade from 5.0 or 4.3.5 to a 4.3 4.2.1 it is a 4G ipod touch im trying to downgrade to a 4.3 or 4.3.3 this ipod model is MC540LL right now i have 5.0 but there was the same problem with downgrade when i had a 4.3.5 firmware

Apple won't offically let you know downgrade.

Downgrading from JDK 1.5.x to JDK 1.4.x

Hi there,
I hope someone helps me with an issue:
I developed a web app using JDev 10.1.3.3 using the JDK 1.5 included with JDev.
As we are now faced with the fact that this app has to run on an OAS 10.1.2, which to my knowledge uses JDK 1.4.x I have to downgrade from JDK1.5.x->1.4.x.
The technologies that I used are Toplink, EJB 3.0 Session Bean and ADF Faces for the UI layer.
I already downloaded and installed JDK 1.4.2_15 from Sun and changed the default JDK from 1.5.x in JDeveloper to use 1.4.2_15. When I recompiled my Model Project, as excected, I got the following compilation errors on my Bean Class java source file:
Error(29,1): errorIllegalCharacter
Error(29,2): 'class', 'interface', or 'enum' expected
on the same line where I had the EJB 3.0 annotation as follows:
@Stateless(name = "NordPublicFacade")
and also on my Local Interface source:
Error(22,1): errorIllegalCharacter
Error(22,2): 'class', 'interface', or 'enum' expected
for the line:
@Local
OK, I know that these annotations/injections(or whatever they're called) are new features of EJB 3.0 and can only be used with JDK 1.5.
I also have red underlines in some facade methods where generics are used for Toplink Named Queries (please remember this is generated code) so for example:
List<CompanyStructure> findAllCompanyStructure();
On my ViewController project (the UI project) I get the following errors:
refresh = false;
Error(37,17): operator = not applicable to class java.lang.Boolean and boolean
JSFUtils.setManagedBeanValue(ctx,"userState.refresh",true);
Error(92,7): method setManagedBeanValue(javax.faces.context.FacesContext, java.lang.String, boolean) not found in class NordMaintApp.view.util.JSFUtils
My questions
1) What's the best way to go about downgrading?
a) Should I create a new EJB 2.x Session Bean or should I use the Java Service Facade (which I hope creates a POJO and therefore is EJB version independant or not?)
b) Is it necessary to do anything special to the Toplink classes?
2) What are the errors that I get in my ViewController project ?
Thanks In Advance
G.P.

Hi again Shay and THANK YOU!
We simply downloaded OC4J 10.1.3 & installed it (all we had to do is simply unzip it) in a separate directory on its own, on the SAME Server as OAS (10.1.2.02 EE, which includes Discoverer and Portal) AND IT WORKED !
We're now back on using JD 10.1.3 with all its new features etc etc. We even downloaded JDK1.5 and got OC4J working with this JDK WITHOUT, of course, affecting our OAS 10.1.2 installation which works with JDK1.4.2. That woudn't have been possible without your feedback.
It's just that looking at that reference you gave me, I thought that I would have to create a separate instance on the OAS 10.1.2 installation and install 10.1.3 on that one. But eventually it was so much simpler than that. And the memory overhead of OC4J is not that much.
I could create a simple ADF JSF page which just displays data from a table and it's OK!
I could deploy it just fine, though I found out that I have to deploy the ADF Runtimes first; OC4J doesn't come with them. Other than that, it was just fine!
As I said, I'm now using ADF JSF pages for my front-end and ADF BC for my back end; it's so much easier than using Toplink directly.
Only one problem left though (sorry to bother you like that):
In one of the previous emails you mentioned it might be better to use Webcenter for ADF Faces. Unfortunately we cannot go with this option I'm afraid, because we already have an existing portal running on the Oracle Portal that's already included with our OAS 10.1.2.02. I assume that the Oracle Portal's version is also 10.1.2.02. Can I deploy ADF JSF faces as a portlet on this one ? I realise that JDev 10.1.3 comes with some wizards to do this and it seems that I have 2 options: Oracle PDK-Java Portlets or JSR-168 based portlets. I just want whichever one will allow me to have my ADF JSF pages deployed as Portlets on OP 10.1.2.02, so that it can be integrated into any one of the exisiting Portal pages that a colleague of mine already developed (and are waiting for my pages to finish, which currently, when called from a link inside a Portal page displays it in a new page and the user can get back to the Portal page by clicking on the browser's back button). I realise that If I have the JSF page as a portlet, it will then be possible to be integrated into an existing page, that is, have my page to occupy it's own region in a Portal's page.
Once again, Thanks for your help and Thanks In Advance.
R,
G.P.

Safari downgrade from 3 to 2 problems?

Similar Messages

Maybe you are looking for