Safari - Flash and Silverlight Plug-ins NOT working

Safari does not seem to recognize my Flash and Silverlight Plug-ins so that I can watch and stream videos. I might have messed it up, but I can not fix it. Any help is appreciated. Thanks!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

Similar Messages

Garage Band and other Plug-Ins not Working

My Garage band isn't working. When I click on it the icon just bounces continually and never does anything. It was working fine yesterday. I also have a couple plug-ins, KORG M1 and Wavestation, that I use with Garage band and they are doing the exact same thing. Why am I having these issues??

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

GPO and RA plug-ins not working in Logic Pro 8.0.2

I have installed RA and GPO on my Mac Book Pro. When I open Logic Pro they are not appearing in the Plug-in list. Kontakt 2 is but won't let me load individual instruments for GPO. The strange thing is I also have a copy of Logic Express and both RA and GPO work fine here (even though they don't pass the AU validation). They also work as stand alones fine. In Logic Pro, RA and GPO do not appear in the AU validation list. Can anyone help? I have all the latest updates as far as I am aware. It's very annoying!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

Nik Software Plug-ins not working with LR3

Hello,
I have both LR 2.7 and LR3 running on my computer. When I installed LR 3, it load the Nik software plug-ins into the external editor section like LR 2.7. However, when I try to use a Nik plug-in in LR 3 I get an error message that the " File xxxxx.tif can not be opened because it does not exist or access is denied." The Nik interface opens, then I get this error message, but then it places the xxxxx.tif file in the film strip. The plug-ins work just fine with LR 2.7. I've uninstalled and re-installed the plug-ins, but the same error message pops up in LR 3. I have contacted Nik Software, but have not gotten an answer that works. Has anyone else had this problem? If so, what was your solution. I've tried everything I know of except uninstalling LR 3 and re-installing. I'm using Windows 7 64bit. I have CS4 (32 and 64bit) and CS5 (32 and 63bit) running and the plug-ins work just fine with them.
Thanks for your help in advance!
Dennis

Hi Martin,
You might try going in the pref and under external editing and try to manually set up each one. Go down to additonal external editing. Click on Choose and then go to the folder where you have your Nik software installed and choose the program file. There will be dialog box telling you to name the file, call it anything you want and the click ok. Go to the drop down bar and select Save as new preset. Close LR3 and then reopen and check to see if your program is there under the new name. If not, you probably will have un-install all the plug-ins and re-install. Hope this helps!
Dennis

My flash and back camera is not working it just out of the blue stopped working I reset everything and it still does not work what should I do it's an iPhone 5c

MY back camera and flash stopped working it just stopped out of nowhere I reset everything and it still does not work what do I do it's an iphone 5c

Backup and then restore as new and see if it works or not.

The newest version of Flash Player won't install on my Mac! Plug ins not working now!

Anyone else having this problem???? I downloaded the "latest version" yesteday. Now I can't run Iheart radio/pandora/Jigidi puzzles without it saying it can't because of "plug ins".

I’m seeing a lot of these complaints with this latest update… and Snow Leopard
I made a PDF with illustrated, detailed instructions to resolve this: Snow Leopard Clean Install.pdf
Use THIS file with those instructions: Flash Player 12.0.0.44 (Mac OS X)

Safari Flash and Silverlight problem.

I have two large problems on safari.
1. Flash: Whenever I play flash, the CPU jumps up to 100+, and then it doesn't come down until I close down the video.
I have everything updated, and this didn't occur when I first got my macbook. Does anyone have a fix for this?
2. Silverlight: I installed silverlight, but silverlight videos don't recognize them on any of my browsers. However, on "Help ----> Installed Plugins", it does show the silverlight plugin installed, but the videos just don't load. I've already uninstalled and then reinstalled, and tried Silverlight 2 Beta 2, and Silverlight 1, but neither of them work. Please help!

These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, 3.1, 3.1.2, QT 7.3, 7.4.x and 7.5 and OS 10.4.11, and should also work with 10.5.4.
Download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 11 (which is no longer in beta) for Mac from:
http://www.versiontracker.com/dyn/moreinfo/macosx/15540
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
Note that Adobe requires you to uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first.
Some users have mentioned that the latest Flash Player versions (v.9.0.115.0 and 9.0.124.0) in some cases conflict with Leopard 10.5.4, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1
You should also ensure that you have downloaded and installed all the correct versions for your Mac of Security Updates up to and including 2008-005. (N.B. Security Updates require both a restart and a permission repair.)
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
And now there is an additional kid on the block: SilverLight. Microsoft has created their own version of what a replacement for Flash should be. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards):
http://silverlight.net/GetStarted/
Recommendation: Close all applications before installing any of the above, repair permissions, reboot, and repair permissions again.

AU Manager Crashes, Standard 3rd party plug-ins not working

I recently had a huge crash, down to the point where I eventually replaced my system drive with a brand new one, and started fresh.
After rebuilding my entire world, plug-ins that used to work, don't anymore - and they're standards that everyone uses (Kontakt 2.1, etc). I can't even get the AU Manager to load.....Logic just sits there forever with "the beach ball of death" untill I force quit.
Nothing "new" has been introduced. I've simply replicated the system I had before down to the T.
Any thougts?
I'm on 7.1.1 in 10.4.4
G5 2x2, LAP 7.1.1, 10.4.2, 4.5 gigs

Try removing all 3rd party plugins and see if Logic works by itself.
Add the plugins back to the components folder one by one, testing to see if they behave.
Sorry to hear about your crash, I have had this happen to me and it was a week of pain.
It really made me wish all plug ins were authorized on dongles, so that something like carbon copy cloner would have saved the day.

File format plug-ins not working

I cannot get any of my file format plug-ins working with 5.1. They were working fine with 5.0. I am using some of the plug-ins here but none are working since I upgraded.
http://www.telegraphics.com.au/sw/
Is there anyway to check whether Photoshop has even recgonized these plug-ins? There doesn't seem to be anyway to scroll in the about screen in photoshop to check there.

Thanks! Ok, I'm getting "NO VERSION - 32-bit plug-in not supported in 64-bit" for those plug-ins.
Is there any workaround?

Topaz Plug-ins not working in LR 4

Spent over two hours on the technical support chat line this morning trying to resolve this issue. In the end, the support specialist had to punt and escalated the case to a higher level. Not sure what that means, I haven't been notified by anyone at Adobe. I also notified Topaz Labs and they said some people are having the problem and some are not but they're looking for solutions. Adobe's opinion was that it was Topaz's issue to deal with but after reading the plethora of posts I'm not so sure. I'm running Mac OS 10.7.3 and that seems to be a common thread through a lot of what I read. I don't get the impression that Adobe is listening to their customer on this one. Otherwise their support specialists would have been all over this. Sigh....guess I'm waiting for a patch from someone...maybe.

I had the same problem with LR4 and plugins from Topaz. I have PS3 and am not interested in downloading PS5. Here is what I sent to Topaz and their response:
I followed instructions for removing old versions of Fusion Express and reinstalled. I purchased two plugins as well today,Topaz Adjust and Star Effects. When I attempt to edit photo in Lightroom 4 by selecting a photo, then choosing Photo, edit in, Fusion Express2 64bit, I receive the message Unexpected error performing command: bad argument #1 to \'lower\'(string expected, got nil). I have 6GB of RAM on a Dell N5010 laptop with an Intel i5 2.53Ghz processor, using Windows 7 64bit.
Response from Topaz help:
Hello,
It seems that the issue with Plug-ins and there compatibility is on Adobe's end, and supposedly they are going to be releasing a new version on LR4 that is compatible (a 4.1 version) asap.
Please see here for more info: http://feedback.photoshop.com/photosh...
Let me know if you have any other questions.

Plug ins not working after upgrade

After upgrading to Mtn Lion, addicitive drums plug ins are not recognized in Logic. They are working fine in garage band.

Sorry I'm unsure! Have you had any progress with it?

Chrome and Firefox plug-ins not installed with latest version of Reader

I'm running OS X 10.7.2 and just installed the latest version of Acrobat Reader and would like to use the plug-ins it is supposed to come with to view PDFs in Chrome and Firefox. However, the version of Reader that I downloaded (10.1.1) doesn't seem to include the plug-ins. A few additional pieces of information:
1) Acrobat Reader > Contents > Plug-ins contains NO files.
2) In Reader, the Preferences > Internet > "Display PDF in browser" box is checked.
3) In Chrome, Acrobat Reader is not listed on chrome://plugins
4) In Firefox, Acrobat Reader is not include in the list of Plug-Ins
I already rebooted my computer, and also deleted and re-installed Adobe Reader. Now at a loss for what to do next. Any assistance would be greatly appreciated!!
Best,
Chelsea

Acrobat Help | Display PDF in browser | Acrobat, Reader XI

3rd party plug-ins not working in logic

I can't get my zero G & Hardcore bass plug-ins to show up in an instrument channal.

Hi,
you need to make sure your plugins are:
UNIVERSAL BINARY
Cheers
Egyptian Merchet and Groma Mac OS X (10.4.9) Black Coffee and a Black Staffordshire Terrier

I have a 16GB iPhone 3G and my screen will not work. When I have my sim card inserted into the phone calls go through, but I take it out and they don't go through. It was fine one minute and then the screen flashed and now it will not work. any answers?

I own a 16GB iPhone 3G. My father passed it down to me a year ago after he got the iPhone 4. I pressed the sleep/wake button on the top of the iPhone to check the time, and as I did so, the screen flashed on and off and now the screen won't work. Whenever I put my simcard in there calls will go through but I am unable to hear them, but if I take it out calls don't go through. I've tried charging it for a while, connecting to my laptop, holding the sleep/wake button and the home button for 10seconds to restore it, but nothing works. I've looked around and no-one'ed seemed to have this problem. I'd like to know what is wrong with my iPhone ASAP. thanks.

First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.

Flash and Vista Home Premium Not working!

so i recently upgrade to windows vista. and after installing
flash(succesfully, no errors) I click on the icon and i get the
busy mouse icon.. then nothing.
I then check the TaskManager and there it is.. Flash.exe
running.. but the actual IDE (Interface) of Flash never shows up.
can someone please help me asap as I need to get this working
and dont really want to downgrade cause i purchased Vista..

Yeah - using Flash 24/7 and the fact that it always has run
10x better on PC is the main reason why
I buy PCs. Thanks for telling me about Vista.
dzedward wrote:
> Security wise--- Yes.. however, it does prompt you
before things install, and
> opening system folder and such, just to make sure that
is what you are trying
> to do... some feel like it's annoying, but after so many
people asked for a
> safer OS, that is what they came up with, and that is
what you get.. I don't
> find it annoying.. The interface is very visually
appealing as well.. After
> being with Vista for a couple days, if you look back at
XP, you will think,
> "wow, that is very bare, and ugly".. I do agree about
the Mac and security,
> that is wonderful, but so far, I haven't been on a Mac
that performs at the
> same level as a PC when running any Adobe products.. but
I might get the iMac
> when panther is released! However, I will still have the
PC, as always.. Here
> at work I'm on an iMac, and I hate the fact that I can't
use the scroll wheel
> to scroll my layers on the timeline... I never knew how
important that was to
> me, until I didn't have it! You can buy/build a PC for
half the money of a
> Mac, and outperform it by double.. that's my 2 cents.
>

Safari - Flash and Silverlight Plug-ins NOT working

Similar Messages

Maybe you are looking for