Safari for Windows will not log into IIS sites with Windows Authentication

Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
It does this on all machines that I have tried.
Any ideas or is this a bug?

I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

Similar Messages

  • My new macbook pro (Mountain Lion) will not log into my 1and1 server to connect to my e mail. My snow leopard macbook does not have this problem - Apple support say it is a 1and1 problem! do I have to wait for an update of Mountain Lion?

    My new macbook pro (Mountain Lion 10.8.1) will not log into my 1and1 outgoing mail server. ( It will receive mail - but does not send)My old Snow Leopard macbook does not have the same problem ( server settings etc. are identical) . Apple Support say its a 1and1 problem , 1and1 say it is an operating System prob - I have tried changing port numbers.

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • I have changed my email address and apple ID online, but the iPad keeps bringing up the old address and will not log into my apple ID

    I have changed my email address, and apple ID online, but my iPad keeps bring up the old address and will not log into my Apple ID

    If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

  • Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

    I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
    You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
    I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
    Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
    ACL found but not expected on Users
    Repaired "Users"
    ACL found but not expected on Users/.localized
    Repaired "Users/.localized"
    ACL found but not expected on Users/Shared
    Repaired "Users/shared"
    ACL found but not expected on Users/Shared/.localized
    Repaired "Users/Shared/.localized"
    Permissions repair complete.
    But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

    Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
    I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

  • ITUNES SCAM DO NOT LOG INTO THE SITE LISTED HERE

    http://3qn5f.9hz.com/
    DO NOT LOG INTO THIS SITE THIS IS A BOGUS APPLE FAKE PAGE TO STEAL PEOPLES ITUNES CARDS BE FORWARNED SEVERAL USERS ARE CURRENTLY REPORTING AND WARNING ALL MAC USERS TO STAY AWAY UNLESS YOU WANT YOUR ACCOUNT JACKED.

    The site listed is still online..
    What ever you do..
    Do not go to this site and log in.
    You can tell this is a fake because the site still has quicktime for panther as a download choice and you cannot download quicktime for panther directly from the quicktime link

  • Safari will not open certain web sites with https or http

    safari will not open certain web sites with https or http,any help will be welcome,it must be a security setting,but i have not changed any settings.

    From your Safari menu bar click Safari > Preferences then select the Exensions tab.
    If there are any installed, switch the button to off, quit and relaunch Safari to test.
    If there is more than one extension insalled, uninstall one a time, quit and relaunch Safari and test.

  • HP Photosmart D5145 will not print on DVD/CD with Windows 8.1

    I am unable to print on a DVD following all instructions several times over. The DVD will not pull into the print position, it does not even try, but after a time it will eject the DVD to the eject position .  Can anybody help Please

    Hi bobbiedean,
    Please let me take a moment to say "Welcome Back" to the HP Forums.
    I see that you are having an issue printing on CD's/ DVD's. 
    This can be sometimes be related to a power issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Are you getting any error messages when attempting to print on the disk?
    Please feel free to write me back at any time.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • The addons window will not close, and comes up with firefox

    I recently re-installed java, and when i opened firefox the add-ons window opened with it. the Add-ons window will not close without closing firefox, and turning the pc off, using ctr+alt+del wont work. any assistant will be greatly appreciated

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also "Corrupt extension files":
    * http://kb.mozillazine.org/Unable_to_install_themes_or_extensions

  • Sennheiser earphone jack will not fit into iPad Air with protective case on

    i have sennheiser earphones and the jack will not fit into my iPad Air with the protective leather case on. The earphone jack is too large. Does anyone know if there is some kind of adaptor I can attach to the jack so it will fit?  Or perhaps know of another solution?

    See here
    http://www.ebay.com/sch/items/?_nkw=large+to+small+headphone+adaptor&_sacat=&_ex _kw=&_mPrRngCbx=1&_udlo=&_udhi=&_sop=12&_fpos=&_fspt=1&_sadis=&LH_CAds=

  • Safari for Tiger will not open

    I downloaded the latest Safari for Tiger 3.1 package for Mac OSX 10.4.11. After instlling the first time, it was not sucessful, and now my old 3.0 will not open, nor will the package for the new 3.1.
    I have rebooted, used my disk utility to check for any problems, and tried many times. I cannot use any Safari at this time.
    Please help.

    If your Safari keeps crashing, or if you are updating Safari (or just have):
    Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta, and now Safari 3.1. If Safari 3.1 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    (Trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 and 3.1 use a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely.)
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-on that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.1.
    You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed the correct version for your Mac of Security Update 2008-002. Like all security updates, this requires a restart and a permission repair.
    As Leopard also uses Safari 3.0.4, much of the above may well also apply to Leopard, but is not guaranteed. Moreover:
    Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Safari in Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • I was able to create a guest network, However Devices will not log into it. Does this have anything to do with my uverse wireless modem

    Help, I have created the guest network. However, no devices can log into it. Can someone help me with my Guest network issues?

    Unfortunately, Apple assumes that you will be using a simple modem with their routers.  Something like this, for example, which will allow the Guest Network feature to work correctly, since the AirPort will be the main router on the network.
    The Uverse is a modem/router, also known as a gateway......a device that combines the functions of a separate modem and separate router in one package. An example of a modem/router would look like this:
    Because the Uverse is already operating as the main router for the network, the AirPort cannot take that role. So,  the Guest Network will not function correctly with the type of device that you have.....even if you try to enable it in AirPort Utility.
    Suggest that you use the AirPort router as your main network, and use the Uverse wireless for "guests".
    Sometimes, it is possible to reconfigure a modem/router to act as if it were a simple modem. I do not think that this is possible with a Uverse product, but you could check with ATT on that possibility if you wanted to do so.

  • HP LaserJet M1120 MFP will not print on wireless network with Windows 8.1 operating system

    The printer worked on the wireless network with Windows 8.
    I have been advised that it does not work with windows 8.1 because a driver is required. However this is not available to download.
    It is ridiculous that by having the latest operating system I am unable to use the HP printer on the wireless network
    When will HP have the driver to download?

    Check the support site here.
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-M1120-MFP-will-not-prin...
    Make sure you have the firmware update also.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Deskjet 3050A all-in-one J611 series will not allow printing from desktop with windows 8

    Hello, I am trying to set up my fiances desktop to my HP DESKJET 3050A ALL-IN-ONE J611 series. It says it only supports other windows, windows 8 not being one of them. Both are wireless and I figured there has to be a way to download some software that I could install in order to hookup this computer. Please any help I could get would be appreciated.
    This question was solved.
    View Solution.

    Thank you very much, I really appreciate it. I will definitely do that. Thank you again for taking the time to help me. Take care and have a great day.
    Sincerely, Tabatha

  • Safari no longer able to log into secured sites??

    " because it couldn’t establish a secure connection to
    the server".
    This is the error message I've been getting when either logging in
    or visiting secured sites.
    I recently defragmented my powerbook, and don't know if this
    would have caused a security issue or not.
    I'm able to view other sites with no problem. just the secured sites
    I'm blocked from visiting.
    Checked my preferences..cleared cache.. don't know what happened.
    I was able to visit secured sites beforehand.
    any thoughts?? ~A~

    tried it and spent the last 30 min. trying to log in
    as adminstrator..
    still no luck with getting through on secured sites..
    any other thoughts? did the disk utility,etc..
    He is something to try:
    Go into the Control Panel open Accounts, create a new
    user. Log into the new user account, open Safari and
    try connecting to a well know site that uses SSL...
    If it works, it means something is wrong with your
    Safari settings in your account, bad preferences,
    etc...
    If it doesn't work, you have to delete system-wide
    Safari preferences, and perhaps start with Disk
    Utilities, Verify Permissions, etc...
    Hagrid...

  • New window will not open even when "open new window in tab" is checked

    I cannot open a new window even when i have the option "Open new window in tab" checked.
    Firefox will NOT open a new window under any circumstances.
    Also, when I quit Firefox, the system thinks that multiple instances of FF is running but they are invisible to me.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

Maybe you are looking for