Safari freezes when I try to print from the webpate

Has anyone else experienced the freeze when you go to the Command P screen?
The only thing I'm able to do is Force Quit as Safari doesn't even show up as "not responding." I've had this problem only since I've been running 10.4.8
Any suggestions for a fix?
Thanks,
Larry

Hi JP,
I think that this thread was the one that 'tipped you over the edge' as it were
I noticed a few days ago, see my post therein…
Well done, not that us 3 bars get much besides the extra 'bar'.
Adrian

Similar Messages

  • When I try to print from the web firefox crashes

    when i try to print from the web firefox crashes

    https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_get-help-fixing-this-crash
    Type '''about:crashes''' in the URL bar and hit Enter. <br />
    # Middle-Click the hyperlinks to bring up each Crash Report page in a new Tab; each page may take a few minutes to load.
    # '''Then copy'n'paste the URL of each of those reports into the message box here.'''
    # We'll see if we can help you figure out what is causing those crashes to happen.

  • "An error occured during operation" this message comes up when I try to print from the internet

    This message comes up when I try to print from the internet...."An error occured during operation" I have to screen print if I want to print anything from internet. Can anyone help with this.
    Bob

    Hello, 
    I see that you're having an issue with the printer. 
    Are you having an issue printing from any other program besides the internet? 

  • My iTunes keeps freezing when I try to switch from the Summary page to the Podcasts page to try and manage which podcasts I sync to my iPod. It doesn't freeze when I manage anything else, only podcasts.

    My iTunes keeps freezing when I try to switch from the Summary page to the Podcasts page to try and manage which podcasts I sync to my iPod. It doesn't freeze when I manage anything else, only podcasts. I have the latest version if iTunes. I can't figure out why this is happening.

    Hello aczett,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • When I try to print from the browser, it only prints about 1/3 of the page, it doesn't shrink the contents, just truncates the print area.

    Currently running FF 3.6.8, with W 7 home professional. Every time I try to print from the FF browser, it truncates the print area to about 1/3 of it's normal size. It doesn't shrink to fit the content, just the print area. I've checked all the settings and they look normal. This only happens in FF, I can go to the same url in ie and it will work just fine.
    == Every time I try to print directly from the browser.

    See this:
    [http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

  • When I try tp print from the internet on this browser the page comes out in small blocks over several pages. It only does this in Firefox, not other browsers.

    At one time it was printing really small, that was fixed and all was well for awhile, now it has started this.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page

  • My mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

    my mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Iphoto freezes when I try to print a picture

    Why does iPhoto freeze when I try to print a photo?  I have to force the program closed.

    That was a test to determine if the original library was damaged and it was.  You did follow the next step but there's one more fix you can try on your damaged library:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
    2 -  select the library you want to add from those in the selection window.
    3 - make sure that in the rebuild window the checkbox  "Scavange orphaned photos" is checked.
    4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    5 - in the next  window name the new library and select the location you want it to be placed. Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.

  • When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

    When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

    What does that error message say?
    See this: http://kb.mozillazine.org/Problems_printing_web_pages

  • When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks

    sandrafromsilver spring wrote:
    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks
    Go to the following link:
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

  • HT4356 My new HP printer is listed above as an AirPrinter ... But when I try to print from my iPad I get a message saying that there are  No airprinters!  Do I need to format/setup something first?!

    My new  Hewlett Packard printer is listed as an AirPrinter on the Apple website,  but when I try to print from my iPad  it says that there are  No airprinters.  The printer is connected to the same WiFi network, is turned on &amp; I'm close to the printer.  Do I need to forma/set up the iPad or Printer to enable this feature?! 

    It would help to post this in a more proper form. This is for the iTunes family of stores.

  • I have a Macbook pro thats prints fine to my HP printer, but when I try and print from my iMac it doesnt see the pages and just prints two blank pages. Even thou the document is a number of pages

    I have a HP Officejet Pro 8500A and I had no problems printing to it from my Mac or Macbook pro. The macbook is wifi and the Mac is cable, I have recently had the printer replaced with an exact model. Since doing that I can only print from the macbook pro, when I try and print from teh mac it doesnt see the pages. It could be a 10 page document and it will just show two blank pages. I have googled the question and have tried deleating the printer and reinstalling without any luck. When I got the new printer I insalled all the latest drivers thats the only thing different.
    Could you please help
    Michelle

    Right click the printer in System Prefences -  Print & Scan and use Reset Printing System... and then reinstall the printer, should take less than 5 minutes. Here is a photo showing how to Reset Printing System....

  • Photoshop CS3 crashes when I try to print from Epson R2400

    Hi,
    For no reason that I can see, when I try to print from my Epson R2400, Photoshop CS3 crashes.
    It was working fine up to yesterday with no issues.
    I have re installed the drivers etc but no use.
    I also cannot choose Printer Manages Colors, as it is now greyed out.
    When the the Printer dialogue opens and I click on the Page Set up I get the Error that "Photoshop CS3 has encountered a problem and needs to close"
    Any ideas please?

    Thanks for the replies.
    I understand now that the procedure is probably the reason.
    I was just experimenting as LAB colours are colours we see through our eyes, while RGB, CMYK etc are "computer" colours and so I use LAB colours a lot, before switching back to RGB.
    I normally switch to LAB mode and click on the Lightness channel, then play with adjustments of that channel. This time I decided to mess around and see what would happen if I removed all channels except the Lightness one....
    Converting to greyscale for me is not enough unfortunately and LAB B+W provides much better contrast and tone than hitting CTRL+Shift+U to greyscale.
    Again, I understand what you say, my point being though that Photoshop should not crash because I incorrectly remove the channels, perhaps a warning to tell me I can't do it would be better.
    I'll pass this onto Adobe anyway.
    cheers

  • When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

    When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

    FingerPrint is not listed as supported on this page: AirPrint Basics
    You might check with the makers of FingerPrint.

  • Lightroom 4 launches to Photoshop CS5 when I try to print from Lightroom. How do I change it

    Lightroom 4 launches to Photoshop CS5 when I try to print from Lightroom. How do I change it, so the printing goes directly from Lightroom to the printer.

    MartyOretsky wrote:
    Let me try again. I am in Lightroom and click print. Then I am launched to PS.
    This is not possible.
    What you are seeing is not PS, it's your printer dialog. PS does not have an ICM button.
    And you say: " Lightroom doesn't stop working; rather CS5 stops working"
    And what does the error message say that you posted in the screen shot?  Does it not say "Adobe Photoshop Lightroom has stopped working" ?
    Do not be confused. Adobe Photoshop Lightroom is the official name of Lightroom. This is not CS5 that has stopped working. CS5 does not come on when you hit the print button in Lr.
    It is Lr that has stopped working.
    And you say: "My next step is to click on ICM so the color controls are done by the software."
    This is wrong. When you want Lr to do the color management, you select a profile in the Print Module, in the <Print Job> panel under Color Management / Profile.
    In the screen shot below I have selected a profile for my HP printer and paper. And that's where you select a profile for your printer and paper.
    You do not click on ICM in your printer dialog. You click there only when you want your printer to manage colors.
    So try to print by selecting the profile in the print Module as indicated and do not click on ICM.
    By the way: Which OS? Are you on a Mac?

Maybe you are looking for

  • How to run the plug in sample

    Do I need to install anything other than Acrobat? I have Adobe Acrobat X Pro installed but when I try to run the sample (ClientApp from plug in), DdeConnect fails with DMLERR_NO_CONV_ESTABLISHED. Is there any documentation on this?

  • Non blocking socket method?

    Is there a method like: Socket s = serversocket.accept();that does not block a program? Or a method for checking if there are any connections waiting to be accepted like: if(serversocket.connectionsWaiting()) { socket = serversocket.accept(); }Thanks

  • Add to the last row, even if I add a row?

    I have a spreadsheet for my business with 3 rows: Credit, Debit, and Total.  I want the Total column of each row to take the total from the row above, subtract the debit and add the credit and give me the new number.  I currently do this with J7−H8+I

  • Laggy MacBook Pro

    I am using a MacBook Pro bought in August 2011 and for quite some time now, my book has been laggy when playing songs from iTunes, movies on QuickTime, and even halfway recording songs on GarageBand, the application will stop the recording and show a

  • Photos go to "last import" and "events" but not photo library?

    Just recently, when I import photos they enter into "events" and "last import" but not into the general photo library....this is with two different computers, one with hardly any photos and one with a ton. It's IPhoto 9. Any thoughts?