Safari getting XML error with Widgets

hi all,
I am new to the MAC world and I am getting an
error when I try and open the "more widgets" icon in
my dashboard. When I click that it should open
Safari and take me to the widgets download page so I
can get more widgets. The problem is that instead it
brings up safari and most of the page but doesn't
finish it and instead gives me an error saying "There
was a problem retrieving XML data: undefined.
The page does open correctly in Firefox. Can anyone
tell me why and how i get it to work with Safari like
it is supposed to. Thanks
Hi Ray,
I had the same problem after upgrading to 10.4.3. I noticed that on my friend's laptop that has 10.3.9, the widgets page opens correctly and shows the XML data. I am viewing both computers and versions, Panther and Tiger, at the same time, so it appears to be a problem with the 10.4 (Tiger) version of Safari. I am VERY surprised that Apple does not have a post about this.
Unfotunately, I do not have a solution for you.
Bill

Similar Messages

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro X

Hello jst84,
The following article may be helpful in getting your purchase to complete.
Mac App Store: "An unknown error occurred (100)" when purchasing
http://support.apple.com/kb/TS3637
Cheers,
Allen

When installing Premiere Elements I get an error with Shared Technologies

When installing Premiere Elements onto a Windows XP Service Pak 3, I get an error with Shared Technologies.

Hi,
Thx for the reply.
I had Bridge open in background and once I closed that Elements installed correctly.
Thank you.

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?

HT3275 Can some HELP, I keep getting this error with my Time Machine Back up, "The backup disk image "/Volumes/JKPN Safe/JKPN IMAC.sparsebundle" is already in use.

Can some one HELP me , I keep getting this error with my Time Machine Back up, "The backup disk image “/Volumes/JKPN Safe/JKPN IMAC.sparsebundle” is already in use.

See > http://pondini.org/TM/C12.html

Error while getting xml document with default connection in 8iJServer

I had used GZIP utility to zip and store the document in
the CLOB. If i use thin drivers and GZIP to retieve this document it works fine.
instead of thin drivers if i use oracle8iJserver defalut
connection i get the follwing error
:Error while getting xml document Not in GZIP format.
your response is appreciated.
thanks
sanjay.

Hi Yepin Jin,
I am facing the same issue did you solved it?
Regards,
Orlando Covault

Safari (only?) errors with Apple Discussion Pages

I have been having connection problems with my ISP -- intermittent inability to load web pages or Widget updates, etc., or just very slow loading. It is extremely intermittent: over the space of an hour or two it can go from full speed cable to near zero to flat out dead.
Complicating things greatly is that sometimes, during the slow-but-not-dead periods, Safari refuses to load Apple Discussions pages at all, displaying error messages with or without an number number, but always saying the connection was lost. Sometimes this is after a minute or so of trying to load the page, which I attribute to the slowness of the connection, but other times it is immediate. When this happens, retry or going to another page with a link back to the first page & trying that continues to get the error immediately.
IOW, Safari won't even try to reload the page. I have tried emptying the cache, but it doesn't help. Other pages will load, but slowly.
At this point, I can get the page to load by copying the URL into Internet Explorer, so I know the page is available & the connection, although slow, is capable of sending the page to my computer.
Does anyone have an explanation for this behavior? Or better yet, a way to convince Safari to try to reload the page?

bump

Why do I get parsing errors with my WSDL URL for Web Services usage

Hi,
I am puzzled with the errors I get when I want to create a Web Service datastore.
Scenario: I have created a SAP Web Service from CRM using SOAMANAGER. The WSDL URL produced by SOAMANAGER is accessibile when pasting the URL directly in Internet Explorer. WSDL URL [http://UXCIQ0M.WDF.SAP.CORP:50076/sap/bc/srt/wsdl/srvc_CBDCB34C89C29304E10000000A4282C0/wsdl11/allinone/ws_policy/document?sap-client=504]
When using the WSDL URL in the Web Service datastore URL field, I get the error An error occurred while importing metadata: WSDLException; faultcode=PARSER_ERROR: Problem parsing: The element type "br" must be terminated by matching tag "/br". (BODI-1111469) (BODI-1112446)
When I save the WSDL defintion in a local file and use a local file path, I get the errors An error occurred while importing metadata: WSDLException (at /wsdl:definitions/wsdl:portype/wsp:Policy): faultcode=INVALID_WSDL: Encountered unexpected element 'Policy. (BODI-1111469) (BODI-1112446)
My questions:
- Why do I get different parsing errors despite the fact that the XML is the same?
- The WSDL is generated by SOAMANAGER. Shouldn't it work directly when integrating with Web Services generated from an SAP environment?
- Is this related to confiurgation issue? I have set the Job Manager to Support adapter, message broker and SNMP communication
- What is the difference between the datastore of type Adapter and the datastore Web Service? In the white paper [http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/20bd5e60-11f9-2b10-2bbb-b5109cceff08?quicklink=index&overridelayout=true] it is mentioned to use the Adapter type to consume a Web Service. It is not clear to me why we have those 2 types.
Thanks & Best Regards
Isabelle

Some updates on this issue, which might help others in the community.
- Data Service doesn't support ws_policy.
- SAP NetWeaver 7.0 SOAMANAGER generate WDSL with ws_policy. In future releases, it is possible to specify not to use ws_policy
- In most cases, replacing ws_policy with standard in the URL directly, works. It doesn't work with Data Services :(.
- Replacing ALL ws_policy in the XML directly is currently the only way to have the WSDL definition being parsed properly by Data Services.

Unable to get XML payload with new JDBC interface

Hello - I have hit a wall in trying to use the new JDBC dequeue interface. I can get an Oracle connection and get a message with the following code:
OracleConnection connection = (OracleConnection) getConnection();
AQDequeueOptions deqopt = new AQDequeueOptions();
AQMessage msg = null;
deqopt.setWait(queueWaitTime);
String queueName = "TEST_SCHEMA.TEST_QUEUE";
msg = connection.dequeue(queueName, deqopt, "SYS.XMLTYPE");
But I have found no way to turn this into an XMLType (or even an xml string). In looking at it in the debugger I have found that the only variable set internally on the payload is the byte [] returned by getPayload(). However, I cannot figure out how to turn this into an XMLType. I checked the Oracle documentation and they only discuss sending / receiving RAW message types.
Any help is greatly appreciated.

Hi,
Can you post your control file here...
I am working on similar thing but not getting it working..getting error like
[070110_022931827][][EXCEPTION] The URL ( xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true ) is invalid.
My translation file name is "XXXPOXPRPOL_fr_CA.xlf"
in my control file i have tried following codes but it didnt work
<xapi:template type="xsl-fo" location="xdo://XXX.XXXPOXPRPOL_fr_CA.fr.CA/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161]"></xapi:template>
<xapi:template type="xsl-fo" location="xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161]"></xapi:template>
<xapi:template type="xsl-fo" location="xdo://XXX.XXXPOXPRPOL_fr_CA.xlf.fr.CA/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161]"></xapi:template>
Please let me know where problem is.
Thks & Rgds
Rajesh

I get this error with iCal "generates a conflict" when synced with my Yahoo calendar. Help Please

I updated to Maverick "Mistake" and have been getting this error since "generates a conflict" with the new iCal and my Yahoo calanders. There werent any problems before the update. Any suggestions as to how to fix it ? Does anyone know how to go back to the last version of iCal ?
Thank you for ANY help

Given that the calendars are hosted by Yahoo, I would remove the accounts, then re-add them back.
That shouldn't lose anything, but I don't use Yahoo so I can't say for sure. They use a standard CalDAV server, so all should be ok.

I'm getting this error with bootcamp "The startup disk does not have enough space to be partitioned"

Here's the story...
I had a dual boot configuration on my mac with Mac OS X Lion and Windows XP (made with bootcamp).
I decided to reinstall windows.
I deleted the windows partition using BootCamp.
Tried to recreate the Windows partition with Boot Camp and got: "The startup disk does not have enough space to be partitioned You must have at least 10 GB of free space available"
After reading several posts on this forum I decided to defrag the hard drive and try again.
The defrag did not work and I'm still getting the error, I have 22 gb of free space on my drive.
Any suggestions?
Also, I tried repair disk and repair permissions
Hmm, my external harddrive says on the box "OS X 10.5.8 or higher (32-bit kernel only)" Could the 32-bit requirement be an issue? Is lion 64-bit?

Boot Camp must be able to allocate a contiguous block of space on the drive. If it cannot find 10 GBs of contiguous space, then you cannot create the Windows partition.
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
Get an empty external hard drive and clone your internal drive to the external one.
Boot from the external hard drive.
Erase the internal hard drive.
Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the downward pointing arrow button.
After startup do the following:
Erase internal hard drive
Open Disk Utility in your Utilities folder.
After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed. Do not quit Disk Utility.
Restore the clone to the internal hard drive
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.

I am getting and error with a panel in CS6 with configurator

I get the zxp file to load into CS6 but I keep getting this error when I try to use anything IOError, "File or folder does not exist"
I have built tons of panels in the other versions of configurator, but I am inporting one I did in version two and converting it. This is driving me nuts.
Can anyone tell me where I am going wrong with this.

You email is blocked. Just find it.
1. The gpc file in you zip archive is not valid. It is not a text file, but a binary file.
2. For the error "File or folder does not exist", I think it is because the jsx file cannot be found. There is a global variable "assetsPath", which points to the assets folder. You can evaluate a file by
$.evalFile(assetsPath + "/LTS_Select Folder Of Images.jsx");
If the panel is exported as "CS Extension" by "File->Export Panel As CS Extension", the jsx file does not locate at app.path.toString() + "/Plug-ins/Panels/Touch Flow/content/Touch Flow.assets/". Therefore, the jsx file cannot be found after click the Script button.
The variable "assetsPath" works when the panel is exported as panel or exported as CS extension.

Getting an error - with date prompt

Hi,
I really need a help to resolve this issue -
I have created a date prompt As of date with presentation variable name CPG_CASH_DATE.
I have use this variable in different number columns - Amount Due Original , Amount Applied , Amount Due Remaining.
Inside the amount due original the function is CASE WHEN "Fact - CPG AR Payment Schedules"."Due Date" <=CAST(CAST(substring(('@{CPG_CASH_DATE}'),1,4)||'/'||substring(('@{CPG_CASH_DATE}'),6,2)||'/'||substring(('@{CPG_CASH_DATE}'),9,2)||' 00:00:00' AS CHAR) AS DATE) THEN ifnull("Fact - CPG AR Payment Schedules"."Amount Due Original",0) ELSE 0 END
Inside the amount applied the function is CASE WHEN "Fact - CPG AR Payment Schedules"."Due Date" <=CAST(CAST(substring(('@{CPG_CASH_DATE}'),1,4)||'/'||substring(('@{CPG_CASH_DATE}'),6,2)||'/'||substring(('@{CPG_CASH_DATE}'),9,2)||' 00:00:00' AS CHAR) AS DATE) THEN ifnull("Fact - CPG AR Payment Schedules"."Amount Applied",0) ELSE 0 END
Sometimes it is working -but now I am getting below error.
Oracle Error code: 1861, message: ORA-01861: message: ORA-01861: literal does not match format string
at OCI call OCIStmtExecute:
Please help me to resolve this issue.
Poojak

Poojak,
This is a common error when attempting CAST to dates. I've resolved this in the past using Gerad's post here, http://gerardnico.com/wiki/dat/obiee/cast_as_date
I'm not sure why you are getting thie inconsistency when you say it was "sometimes" working and now it is not. Perhaps you've been in iterative develpment and changed a few things which broke something here.
Take a look at Gerad's notes that this will resolve your issue.
Please awards points if this helps or answers your question.
Cheers,
Christian
http://www.artofbi.com

How can I edit iCal server addresses in Mountain Lion? I keep getting an error with regards to my google calendar and I understand that the way to fix the problem is adjust the server address, but I cannot access it because the preferences are restrictive

How can I edit iCal server addresses in Mountain Lion?
I keep getting an error message with my google calendar, and I heard that if I delete the extra slash at the end of the address the problem will be fixed. But the iCal account preferences take me to system preferences > accounts every time I want to edit the account.
Does anyone know where I can edit the server address?

You should ask in the iCloud forum, this is for iMacs. https://discussions.apple.com/community/icloud/icloud_on_my_mac

Getting XML error ?

Am trying to create a XML file but are getting this error:
org.apache.crimson.tree.DomEx: HIERARCHY_REQUEST_ERR: This node isn't allowed there.
at org.apache.crimson.tree.XmlDocument.appendChild(XmlDocument.java:661)
at layout.funktion.GemXML.indlaesObj(GemXML.java:88)
at layout.funktion.GemXML.<init>(GemXML.java:44)
at layout.funktion.GemXML.main(GemXML.java:119)
My test code;
        try
            DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
            DocumentBuilder builder = factory.newDocumentBuilder();
            document = builder.newDocument();
            rootElement = document.createElement("XMLTest");
        catch(javax.xml.parsers.ParserConfigurationException e)
            e.printStackTrace();
        for(int i=0;i<feltListe.size();i++)
            childElement = document.createElement("felt");
            rootElement.appendChild(childElement);
            for(int j=0;j<antal;j++)
                grandChildElement = document.createElement("tag");
                grandChildElement.appendChild(document.createTextNode("tagValue"));
                childElement.appendChild(grandChildElement);
            document.appendChild(rootElement); //THIS IS WHERE I GET ERROR
        }Can someone plz tell me what am doing wrong?

You append the root element more than one time!...
        try        {
            DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
            DocumentBuilder builder = factory.newDocumentBuilder();
            document = builder.newDocument();
            rootElement = document.createElement("XMLTest");
        catch(javax.xml.parsers.ParserConfigurationException e)        {
            e.printStackTrace();
        for(int i=0;i<feltListe.size();i++)        {
            childElement = document.createElement("felt");
            rootElement.appendChild(childElement);
            for(int j=0;j<antal;j++)            {
                grandChildElement = document.createElement("tag");
                grandChildElement.appendChild(document.createTextNode("tagValue"));
                childElement.appendChild(grandChildElement);
// Just remove this line!
//          document.appendChild(rootElement); //THIS IS WHERE I GET ERROR
        }

Safari getting XML error with Widgets

Similar Messages

Maybe you are looking for