Safari Hangs after deleting :Awesome" but works for few when restrating

Safari Hangs after deleting"Awesome" but works for few minutes once shutdown and restart

I tried to look at other similar problems and tried to play around with it.
What I noticed was that I deleted the application but did not uninstall the extension.
Now I have now uninstalled the extension and Safari is back to normal.
Thanks Andy for your response

Similar Messages

Hello . I hope to get a solution to my problem: ( I bought a laptop Mac Pro, a user But the seller was not the Secretary Laptop after arriving I've worked for almost an hour When connected to electricity Nour appears very faint, I do not see it quickly ht

Hello
. I hope to get a solution to my problem: (
I bought a laptop Mac Pro, a user
But the seller was not the Secretary :" ( !!
Laptop after arriving I've worked for almost an hour
* When connected to electricity
Nour appears very faint, I do not see it quickly
http://www.3rabart.com/up/download.php?img=38472
When separated from the energy, light shows intermittently and then disappears fast
http://www.3rabart.com/up/download.php?img=38473
I need urgent help please.
Thank you

Please ، How Email for a company ? I want to communicate with them about my problem "(

SM36/37: Specification "After Job" does not work for Daily "periodcity"

I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
Lara

Please close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

Ichat works for me when I'm in the US but not in the UK. In the UK it is like watching a tape played at about 1/10th speed.

iChat works for me when I'm in the US but not in the UK. In the UK it is like watching a tape played at about 1/10th speed. I have O2 broadband (who decline to help as they "do not support third party software").

Hi
In iChats prefs click on video and change bandwidth limit to 500.
Restart iChat.
Tony

Have white screen on iPhone 5 after it started and worked for over 10 hours

Have white screen on iPhone 5 after it started and worked for over 10 hours

So now that I have joined the community, I can see this question was asked before.... so I think I have my answer
It just takes a loooooong time

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.

reinstall by clicking setup on your disk or downloading and installing,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Adobe Reader hangs after opening a PDF file for a minuet

Adobe Reader hangs after opening a PDF file for a minuet

Pat. Thanks for your promote reply. I have resolved the issue.
Closing the tools pane at the right side:
open Adobe Reader without opening a PDF file
collapse 'Tools' pane
then open some PDF
It shouldn't hang anymore

Motion tracking is not working for videos but works for images?

Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

ivanhoeeurope
Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
13 to 12.
What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Apparently this web site does not sell the tryout. It just makes it available for use.
Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Multiple Safari hangs after installing Snow Leopard

I had 5 Safari hangs today within hours...never had one since I bought the machine in June 2009 with Leopard installed...Since the SL upgrade CD, I have had 2 system freezes that result in a complete shutdown to clear and multiple Safari hangs that I able to recover with a force quit..My daughter in college with the same machine reported that she had 3 system freezes in one day since SL...My wife who did NOT yet install the SL upgrade and is now blissfully having no problems at all and does not want to install the new OS (again same machine type, We bought 3of them in June after the announcement). I hope that this gets debugged and fixes provided...

Hi,
Mac OS X 10.5: What you can do if Safari quits unexpectedly
That links is for 10.5 but the trouble shooting will work in 10.6 also.
For system freezes try maintenance.
Maintaining Mac OS X
On the Macs you upgraded to SL, did you check to see if you had 3rd party software installed that might not be compatible? http://support.apple.com/kb/HT3258
Did you repair permissions after the upgrade?
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Safari hangs after 10.4.7 update

When I was running 10.4.6, Firefox and Safari were comparible in speed.
After I upgraded to 10.4.7, I'll enter a URL or click a link to another page, and Safari will just kinda hang after loading about half of the items on a page (according to the progress bar at the bottom). Usually if I re-request a page (clicking a link a second time, or re-entering the URL) the page will load completely. Firefox loads all pages as it did before.
I've done all the permissions repair thingys.
I've tried upgrading my flash player to flash 9 (just came out today, I think) but it didn't help, though flash 9 seems to now allow me to view spiketv.com videos that I wasn't able to see before.
I also did a "Reset Safari", and I think it helped a little, but the hanging problem persists.
Has anyone else experienced this since upgrading to 10.4.7?

I'm suffering from the same problem but it started a few days ago without me installing 10.4.7. It just hangs while downloading web pages. I don't mean the browser app hangs - I can still access menus. It just fails to download web pages. This will typically happen after, say, 30 minutes of use. I have reset Safari, switched of Java and Javascript, and it all has no effect. If I quit Safari and restart it cures the problem for a short while. If I disconnect from my wireless network and reconnect it has no effect. Meanwhile Firefox works fine so that's the browser I'll use until Apple fix Safari. The hang can happen mid-page, and then from that point no pages in any tabs will download.

Problem with validateRegExp (problem with IE and chrome but works for firefox)

Hi everyone,
I have a simple af:inputText with an af:validateRegExp in it with pattern "([^$%# ]+([ ]*[^$%# ]+)*)$".
Now when I enter a very big value in this inputText and finally add a space to it, it gives a proper validation exception in Mozilla FireFox.
But when I run the same thing in IE/ Chrome the screen hangs and after some time page not responding exception comes. What it is observed in chrome is that after a very long time it gives the proper validation exception even if page not responding error has come earlier. Has anyone faced such kind of problem earlier? Is there any solution for this?
{code}
<af:inputText label="Label 1"
                      binding="#{backingBeanScope.backing_datePOC.it1}"
                      id="it1" maximumLength="120">
          <af:validateRegExp pattern="([^$%# ]+([ ]*[^$%# ]+)*)$"/>
        </af:inputText>
{code}

Hi Frank,
Thanks for your reply. I tried checking this pattern in java as well using an validator, in that case the thread got sucked for a bigger length string. So I guess the problem is with expression only. But I dont get one thing, if the problem would have been with expression it shouldnt have worked for smaller length string. But in this case it is working fine with a smaller length string.
Regards,
Vipin V B

How come my safari wont open Facebook? but works with other sites?

My safari will connect to internet and work with all webpages but says it can not connect a secure connection to Facebook? it is the only site it has done it with and its been doing it for 3-4 days now

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Safari hangs after Updating to Mavericks.

Whenever I try to SWIPE(back and forward) between pages in safari, all the trackpad gestures stop working. I cannot even scroll up and down using trackpad. Tried the same in Chrome as well. Witnessed the same issue. But, in Chrome, I can go back to the previous page by clicking on the BACK button. While in Safari, clicking on the back button does not help. I can open and close tabs. but cannot use the trackpad gestures for anything in safari. Kindly help. I have noticed this only after updating to Mavericks. Beforre mavericks, everything was fine.
Details:
OS X 10.9
Safari 7.0 (9537.71)
Chrome Version 30.0.1599.101

Sachin --
This is a common situation. Many third-party internet apps/plugins/extensions claim to be compatible with Macs.
And many are not. It's important to remember to check for any updates to this kinds or things prior to upgrade.
At any rate, very happy you've got your problem resolved.

Creating AWT child dialog within a parent hangs in 1.7 but works with 1.6

Hi,
We are making use of Java AWT packages. In which we are creating an child dialog within a parent window and it hangs, meaning none of the buttons on the child window works, even the close is not happening (parent, child and console all hangs, need to kill the applet from the task manager). No error/exception is seen in the Console. No deadlocks noticed in the thread dumps.
This is seen only with JRE1.7 (update 10,11,13,15) version. But the same code is working fine with JRE 1.6 version.
We also have same codebase of next release, where the code is changed to Swings and that seems to work with JRE1.7.
Can somebody suggest me what might be causing it to fail with JRE_1.7 at the earliest as this a critical issue.
Thanks in advance!

We have a tuxedo service which needs to communicate with a POS device by socket. The parent process provides the tuxedo service. The child process provides the connection management for the device. Unnamed pipe is used for communication between the parent and the child. In the child process, there is no code related to tuxedo. The benefit of that design is the tuxedo server does not need to wait for connection from the device when boots up, and the tuxedo service does not need to wait for connection from the device when the service is called.
The tuxedo server was developed 10 years ago, and worked fine till we upgraded tuxedo from 10 to 12 recently. That means it worked for 10 years, and it worked in tuxedo 6.5, tuxedo 10. But in tuxedo 12, tmboot does not return for this tuxedo server. We have to press CTRL-C and yes to cancel. After cancel, the tuxedo service seems working fine.

Safari hangs After upgrade to 10.5.6

After I upgraded to 10.5.6 last night I have been unable to use Safari. Safari just hangs after imediately opening. Firefox works just fine. Anybody having this issue after the OS upgrade? I am at a loss of what to do.
Thanks,
Matthew

I had the same issue after instilling a security update. (Running 10.5.6 already)
Safari would simply hang when trying to load websites with external resources such as CSS and SWF files - Google lagging such resources, worked perfectly - But navigating to other websites would lock up the browser. To solve the issues I tried the following;
- Running software update again, installing everything missing.
- Downloading and reinstalling Safari manually
- Downloading and reinstalling newest version of flash.
- Downloading newest build of webkit - which also locked up.
- Rebooting (Doh)
Nothing of the above worked; then I found this thread and noticed one thing I had not tried - Resetting safari!
Started safari and hit ESC immediately to stop safari loading anything.
Safari -> Reset Safari -> Check all checkboxes -> Reset.
Success; this message is written using my new working Safari!
In hindsight I should have reset each of the options separately to narrow down the bug. But I was not in a debugging mood at the time.
Chris
Message was edited by: Benjaminsen

Safari Hangs after deleting :Awesome" but works for few when restrating

Similar Messages

Maybe you are looking for