Safari - how to change auto entry status

I deleted the password for a site in the prefence area. Now the site doesn't remember current name/password and doesn't ask to remember. How do I reset?

From your Safari menu bar click Safari > Reset Safari
Select: Clear History (that also empties the Safari cache)
Deselect the other boxes then click Reset.
Quit and relaunch Safari. Try logging into that site again.
If that didn't help, go to Safari > Preferences > Privacy
Click: Remoe All Website Data (deletes cookies)
Quit and relaunch Safari. Try again.
edited by: cs

Similar Messages

How to change a prospect status to customer in BP,when the prospect turns out to be a potential customer?Please help me with the details.

How to change a prospect status to customer in BP,when the prospect turns out to be a potential customer?Please help me with the details.
Moderation: Kindly search before you post

Dear Ramesh,
Using Account life cycle we can record the different stages of a BP.
But at any point of time we can hold one Stage at Business partner.and once we change status Prospect ro Customer. We can't able to see Prospect Status in that BP.
Ex -
Stage A- Potentail
Stage B- Prospect
Stage C- Customer
with the help of UI configuration we can define.
Need your comment,
Thx
Karthik

How to change the field status of "plant" of standard activity ?

hi,dear all:
I want to know how to specify the field status of "plant" of standard activity from "ready for input" to "required entry".
Can the field of the stand network be changed?
Thanks.

Hi,
Try in T-code OPN6
Regards,

How to change the IO status to CLOSE after it has been settled through ko8g

hi ,
I have the following scenario : An internal order is assigned to a PO and after setllement of such an order i need to CLOSE the order .
The PO has a GR done (no IR) . Currently Internal Order is in the status : TECO [technically complete] and setlement has ben doneusing Actual Settlemnet Run using KO8G.
Now i need to change the IO status to [ CLOSE ] : it is gving an error in KO02 : Balance is not zero .
How to change the Internal Order status to CLOSE or rather how to make teh balance in that Order toZero?
Is it reqd to process some GR's for teh same PO ?
Thansk
Trina

Hi,
Check the order balance in Ko02
Menu --> Extras --> Order Balance if balance exist it means that the order has not completely settled.
Regards,
Raj

How to change Auto-reaction method automatically?

Hi all,
I want change the Auto-reaction method for few systems in the landscape,How to change the method automatically for all the system with out doing Manually in eash of the system.
Regards,
Neni

Hello
The below URL might be useful to you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/201c3148-faef-2d10-ac80-e0a8bc7503a1?quicklink=index&overridelayout=true
Thanks & regards
bala

R12-Please let me know how to change the product status

Hi,
We are looking to change the "INV" product status from "shared" to "Fully installed".Please let me know,how to change the same.

Hi,
Did you verify the current status of the product?
Note: 443699.1 - How to check if certain Oracle Applications product/module is implemented?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443699.1
You can change the status of the product from shared to installed from OAM > License Manager. Once the product is installed, run the following via adadmin for this product (optional but recommended).
- Generate message files
- Generate forms files
- Generate report files
Regards,
Hussein

How to change the IDOC Status from 30 to 03

Hi Friends,
In the Partner Profiles Collect IDOCS option is Selected and the Output mode is 4.
In my Custom Program i am Using the Function Module MASTER_IDOC_DISTRIBUTE to generate the IDOCs
I am getting the IDOCs of Status 30.
then in my Custom Program, I am Submitting the IDOCs to RSEOUT00 program.
to change the IDOC status from 30 to 03.
SUBMIT rseout00 USING SELECTION-SCREEN '1000'
               WITH docnum IN gt_range_idocs
               WITH p_compl EQ 'Y'
               AND RETURN.
but still i am not getting the IDOCs of changed status.
I need to get the Changed IDOC status and if the IDOC status is not changed then I need to generate an Error file for the IDOCs data and send that data to customers as a mail.
so my requirment is to call the RSEOUT00 in the Custom Program and Change the IDOCs Status to 03.
When i am Executing the RSEOUT00 Indidually by giving the IDOCs numbers, then the IDOCs Status is going to change to 03 from 30.
Kindly Guide me how to proceed furthur
Thanks in Advance,
Ganesh

Thanks Shrishit,
RC1_IDOC_SET_STATUS changing the Status from 30 to 03.
Its fine, But my Question is will IDOC Data will be reached to XI Server or not.??
means is the functionality of this Program is same as the RSEOUT00.
MY job is to change Status from 30 to 03 only
and then Check the Status of those IDOCs, and if the IDOC is not sended to XI i.e.;03 status, then I need to send the Details of IDOC (i.e.; data in filed IDOC) to Customer Mail ID through an Attachement.
I hope you Understood my AIM, why I need to change the Status in my Custom Program only, by submitting IDOCs to this report .
Kindly waiting for your reply,
Thanks in Advance,
Ganesh

How to change DTP Overall Status from Yellow to Red

Dear all,
if I choose "set overall status automatically", how can I change DTP overall status when I want to stop the DTP running? Thanks.

Folks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks

How to Change Document Default Status

Hi Everyone, How can i change Document default status for Goods Receipt PO. I want like this
When user create new GR PO the default status for the document should be "Draft"
but now it shows status as "Open"
Thanx & Regards,
Amar

Hi
For this simple create one user for Qualtiy department and when ever u r receving the GRPO make a approval for this document. so the appoaval has to go to qualtiy dep. user, after he auhtorises then Add the doc.
Make Row level UDFin the name of "Qualtity Passed" and Make Drop down as "Passed & Failled or as ur wish" ..
so the quality dep user has to check the qualtiy of each row item d he has to make passed or Failled and tell him to add, for passed qty make invoice, for failled failled make return .
Giri

How to change designer workflow status manually?

Hi All,
I need to change designer workflow status manually. I tried to edit with datasheet view but couldn't. How to do this? thanks in advance!

Hi Sam,
According to your post, my understanding is that you wanted to change the workflow status manully in SharePoint Designer.
There is no out of the box way to accomplish this with SharePoint, and we also can not achieve it with SharePoint Designer.
We can use the Visual Studio to custom the status.
In SharePoint object model the status of the workflow is modeled through the SPWorkflowStatus enumeration. Each status value is an integer that represents its place in a zero-based ordered list.
The status values can be extended through the StatusColumn element in the ExtendedStatusColumnValues section of the Workflow.xml file.
More information: http://blog.naikoo.com/?p=25
http://sharepoint.ginni.me/2010/01/setting-workflow-status-to-custom.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to change Work order status ?

Hi,
I am using an ABAP program to change the user status of a work order to "CLOP" , This is like IW32 , Here Which function module I can use to do this ?
Thank you for your help.
Thanks

Hi,
You can use the FM 'STATUS_CHANGE_EXTERN' for updating the user status. and 'STATUS_CHANGE_INTERN for updating the system status.
Hope this solves your problem.
Regards,
Hari

How to change the application status back to build and run

hi ,
i changed my applications status to run only .. and now system is not allowing me to change the status of my application back to "build and run"
any help is appriciated..
Thanks

I found the solution for my problem as go on below track and change the setting.
Home-->Application Builder-->Cross Application Reports-->Build Status and Application Status

How to change customer specific status of employee?

Hi All,
I would like to change the Customer Specific Status of employee.
In PA30/PA40, the customer specific status is in display mode.
How to do it.. Any transaction code?
Regards
Pavan

Hi Pavan,
All three status indicators (customer defined, employment, special payment) can only be assigned at the time the action is created (cannot be changed thereafter).
Do the creation through :
SPRO : Personnel Management -> Personnel Administration -> Customizing Procedures -> Actions -> Create Customer-specific status.
Regards,
Dilek

Yahoo Default location in Safari: how to change it permanently?

In Safari I have added (but don't recall how) to the toolbar an icon (with a "cloud") which takes me to the Yahoo! weather page:
http://weather.yahoo.com/france/ile-de-france/paris-615702/?unit=c
Once there I can enter another location (e.g. my hometown) and also specify this to be the "default location". But this default location apparently is not being stored, since when clicking on the cloud icon
I still get back to the original "Paris" weather.
Any idea how I could make my hometown permanent?
Cheers
Veit

Are there perhaps settings in Safari that I need to change, i.e that prevent the Yahoo page from accepting the changes to the default location which I made there?
Unfortunately, the settings are controlled by Yahoo, not your browser.
Perhaps I need to address this question to the developer of the "Cloudy" extension of Safari.
I wasn't aware this was a Safari Extension. Definitely try contacting the developer. That information should be in Safari / Preferences - Extensions.
I realize that I was not precise in my question.
Don't worry about that. Sometimes it takes going back and forth on a thread to figure it out.
Thank you for the star.

How to change Auto-generated web service's URL

Hi,
is it possible to change/edit the auto-generated url of a web services created with the wizard in SE80 transaction?
Example:
Now the wizard generates a URL as following:
http://<host name>:8080/sap/bc/srt/wsdl/bndg_4BC67655E5155680E10000000A7B0410/wsdl11/allinone/standard/document?sap-client=001
where the alfa-numeric code 4BC67655E5155680E10000000A7B0410 changes every time I create the service. at the same time and for the reason above, I have to change the LOGICAL DESTINATION with "visual administrator" application to consume the service in SAP Netweaver environment.
Thanks in advance.
Luca

Hi Luca,
Please refer the below link . it is described that URLs and its Namespaces . Please check whether its useful.
[http://help.sap.com/saphelp_nw70/helpdata/EN/8c/780741375cf16fe10000000a1550b0/frameset.htm] .

Safari - how to change auto entry status

Similar Messages

Maybe you are looking for