Safari Is Not Responding When I View other Programs

When I have Safari open, and move the mouse to the upper left corner of the screen to view other programs - when I try to return to Safari it does not respond. Instead it sits in the background and will not come up or let me close it. It happened for the first time last night, and again this morning.
Any advice?
Thanks!

Shouldn't have! I'd be surprised if it did - but it wouldn't be the first time I'd been surprised by a computer!!!

Similar Messages

My mac book safari always not responding when i klic on sidebar

my safri always not responding when i klic on sidebar pleas help me to solve this problam

Jasmin325<
Also please include your model, year, which OSX you are using, this will help anyone reading this to offer advice.
https://discussions.apple.com/docs/DOC-5431
A couple of shots in the dark here.
Try this, start in safe mode and see if it will go. Power it off, power it on holding the shift key, continue to hold the key till you see a progress BAR, then release and see if it will finish booting. If it does login see if thigs work, then log out and try booting normally. (NOTE that this takes considerably longer,be patient)
Another thing you can try is powering it up holding the OPTION key and see if the start up manager brings your HD up on the screen, if it does click on that and see.

My iTunes keeps freezing/not responding when I open the program?

I am trying to restore my mum's iPod nano after it just died and won't work- but everytime I open iTunes it crashes! It works for about 1 minute of use before it stops responding and I have to end task, but then when I try and re-open the program it doesn't open unless I plug my own iPod in!
Someone help me try and fix this- mum wants her iPod back and I want my iTunes working again!
My computer operating system is Windows 7
iTunes is the latest update (I think). Any solutions?

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals

On my iPad Air Safari crashes and quits when I view a slideshow.

On my iPad Air , Safari crashes and quits when I view a slideshow on an internet site. Sometimes it doesn't crash but the slideshow is freezes. Any idea why?

Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My Elements 9 is not responding when started Windows

My Elements 9 is not responding when started Windows.

Without proper system information and otehr details such as the crash log from the Event Viewer nobody can say much.
Mylenium

I am on Software Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?

I am on Software Mac OS X Lion 10.7.5 (11G63)and keep getting Safari is not responding?
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
Graphics NVIDIA GeForce 8600M GT 256 MB

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

Itunes keeps not responding when i try to log out of my account

itunes keeps not responding when i try to log out of my account
I have tried uninstalling the itunes program and re Installing it but it has not worked,
Is there anyone that can help me?

Have you tried leaving it to hang for 5 minutes?

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

My ipod touch is not responding when i plugged it in even with a different cord and restarting my computer

my ipod touch is not responding when i plugged it in even with a different cord and restarting my computer and i am using my moms itunes that she has had for a long time and so i cant uninstall itunes.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation!

Lion Clients 10.7.4 show network accounts are unavailable and server is not responding when binding to Snow Leopard server 10.6.8

Hello,
I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4. While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD. I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager. Towards the end of the week though this stopped working. Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding". If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen. My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else.
I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly. I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD. I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
Is anyone else having this issue? Any help would help me keep my sanity.
Thanks,
Dane

Have you had any luck finding a solution to this? The only thing I have found was to unbind and then bind without authentication. Any help with progress on your end would be appreciated!
Nick.

Photoshop CS6 is not responding when leaving PS and coming back again

A weired problem: My new installation of Photoshop CS6 (OS X Mavericks on a new MBP) is not responding when leaving PS and coming back again.
Example: i open a new file in PS - then i click on the desktop - when i go back to PS again, it is not responding to any click on any window (except for the menu bar).
I can solve the problem when i try going back several times or when i go back to PS via the icon in the dock.
But it is still very annoying in a quick workflow.
I would appreciate any idea what i can check more, cause i tried everything and i can’t find this issue on the web…
Thanks…

Problem solved… The troublemaker was the Trackball Works Driver for Kensington trackballs / Expert Mouses…
I’m now using a generic driver for USB devices and everything is fine.

My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select. Now I cannot open a file in my finder window by double clicking on it. Any suggestions?

My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select. Now I cannot open a file in my finder window by double clicking on it. Any suggestions?

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

Safari Is Not Responding When I View other Programs

Similar Messages

Maybe you are looking for