Safari is slow to open and close. It also slows down other apps while running. Should I reload safari and if so, how do I do so?

Safari is slow to open and close. It also slows down other apps while it is running. How can I resolve this issue?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If there's no improvement, continue as follows.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Similar Messages

I want to buy MBA 11'' which model is good. i.e. i need speed. I am using Lenovo netbook s-10. Is very slow in opening web pages an also in operating other apps.

I want to buy MBA 11'' which model is good. i.e. i need speed. I am using Lenovo netbook s-10. Is very slow in opening web pages an also in operating other apps.

Put your first emphasis on memory. Don't even consider 2 GB.
Second, maximize your SSD size according to the ability of your wallet. Lastly is your processor.
For what you describe the MBA is plenty fast.

My iTunes app on my iPhone 5 keeps opening and then crashing, how do I fix this?

My iTunes app on my iPhone 5 keeps opening and then crashing, how do I fix this?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

The utiliy installer / uninstaller for elements opens and crashes. how do I replace it?

he utiliy installer / uninstaller for elements opens and crashes. how do I replace it?

Attached files don't come through to the web forum.
Below is a working example of Spry Menu 2.0. View source in browser to see the code.
http://alt-web.com/DEMOS/Spry-test.html
You'll see references to a whole bunch of supporting CSS and JavaScript files. These must also be uploaded to your server for Spry widgets to work properly.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Photo Booth will not open. My camera works well with other apps.

Photo Booth will not open. My camera works well with other apps.

try running it in either 32 or 64bit mode and see if this changes the experience. Locate the icon in Finder, right click "get-info" on it and see the checkmarks "run in 32bit mode" ..
on Lion some users had trouble opeining pb when "iglasses" was installed, also a thing to check.
Else repair permissions of the disk, using Apples disk utility app.

My iPhoto window is open and frozen. How do I close it?

The window is open and will not close, move, or do anything.

I hae the same problem, but find that if I Force Quit, the next time I open iPhoto it needs to repair the library.
This makes me a little nervous, and I'd prefer to know why it hangs, and how to prevent the problem in the first place.

HTMLEditorKit triggers lookupAllHostAddr and slow down the app

Hi,
When I want to dynamically insert HTML code in my HTML Editor kit :
HTMLEditorKit kit = new HTMLEditorKit();
kit.insertHTML(doc, doc.getLength(), chatContent , 0, 0, null);
It always trigger a :
java.net.Inet6AddressImpl.lookupAllHostAddr(String) : java.net.InetAddress 2.114023 2568 ms (2.1%) 2568 ms 1
and it slows down my application a lot.
Would you have any idea to avoid that ?
Thank you very much.
Regards.

COuld you post what's the chatContent ?
Would be great if you can post SSCCE to illustrate the problem.

Imovie slows down then freezes while importing from camera

I am trying to import a movie from my canon hv10. I've never had problem the last 2 movies I did. but this time around it starts importing, and a few clips later, slows down to 1/8th time. then freezes. The camera is still playing but it has stopped importing. I have tried to pause it to let it catch up. Restarting it numerous times. It is being imported into my 500 GB hard drive. I have 400 GB available. It's worked before in HD. Any ideas? anything would be helpful, I've searched every single message board so far. thanks.

I had a smilar problem. it came up when I changed OS to Leopard OS X 10.5.
My Imovie HD 5 had been working fine until then under earlier OS versions, both in LP as well as in normal mode. Then all of a sudden importing stopped eery few seconds.
I checked many discussions in this forum and tried a lot of suggested solutions, to no avail. I have now come to realise that Leopard is the problem, not the camera, the cable, or preferences or good old iMovie HD.
I simply went back to an older laptop (iBook) running OS 10.3.9 and iMovie 3 . No problem whatsoever importing clips (just had to start a new project about every 20 minutes of clip import). Then attached my external harddrive via firewire, copied the projects to the Hard Disk and then opened them with iMovie HD 5 and bingo: the project was OK and could be further worked on.
So that does not solve the basic problem, but is not too complicated as workaround.

Internet connection slows down after a while

I have a wrt160n connected to an arris cable modem. When I set it up it works fine - after a period of hours the internet connection slows down a lot. If I then connect my computer directly to the modem it is is fast again. But to get the signal to the router working fast again I have to reset the modem and power cycle the router. Is there a conflict - is my router rationing access or what?

You should download and upgrade/flash your router's firmware...
Download the Firmware from here
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1350 and click Save Settings...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

PC (Windows) slows down by 90% while bonjour is installed

For about two weeks, after i installed Apple Quicktime (don't need iTunes, do not want iTunes) My computer slowed down, by about 90% (it took 30+ min to open Mozilla Firefox, i timed it) and CPU usage would NOT go above 15%
AS SOON AS I UNINSTALED BONJOUR THE COMPUTER WENT BACK UP TO A NORMAL LEVEL OF SPEED
I changed nothing else but bonjour and worked in correcting the problem
Any thoughts as to why this occurred?

http://www.google.com/search?num=100&hl=en&client=firefox-a&rls=org.mozilla%3Aen -US%3Aofficial&hs=NS9&q=Bonjourspywareslow&btnG=Search
*Google search for "Bonjour spyware slow" (68,100 hits)*
http://blogs.adobe.com/jnack/2007/01/cs3doesntinst.html
*READ THE COMMENTS*
Google search for "Bonjour spyware" returned 371,000 hits

Why does my data logging program slow down after a while?

A data logging program created with Labview 5.1. Slows down after a few weeks and creates files in the Temp. directory.Computer is Siemens Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also using Solartron Dig. probes and Fieldpoint units.

Any chance that you are using Win 95/88/ME? Those OS's have well documented
memory leaks which will consume all your available memory if an application
is run long enough. Also there are some issues of memory management within
LabView in the allocation of memory.
The solution to the first is to switch to WinNT/2K. The second will be much
more difficult.
On Thu, 22 Feb 2001 03:19:12 -0800 (PST), Freek wrote:
>A data logging program created with Labview 5.1. Slows down after a
>few weeks and creates files in the Temp. directory.Computer is Siemens
>Scenic pro 124 MB ram and AT-MIO-16XE50 Data acquisition board. Also
>using Solartron Dig. probes and Fieldpoint units.
===========================================================================
SolidW
orks Research Partner National Instruments Alliance Member
Christopher Dubea Phone: (504) 847-2280
Vice President of Engineering Fax: (504) 847-2282
Moving Parts L.L.C. email: [email protected]
P. O. Box 6117 URL: http://www.movingpart.com
Slidell, LA 70469-6117

Tempo of music slows down after a while when using IPod Shuffle

I started running with my IPod shuffle,
and I noticed this glitch, that everytime that I go running,
after a couple of minutes (5-10 minutes), the music starts slowing down,
and let me say that the battery was full when this happened.
help please?

I think so, This IPOD is not exercise friendly, I had exchanged my earphones twice, and used a set of earphones without the controls, after 20 min in a run the thing just stopped, I charged it before I left, I think this is a moisture problem.

Computer slows down after a while of usage

I just purchased a new Mac Mini (the one with no optical drive) & I noitce after a while of usage it starts slowing down. The most mundane tasks can take minutes (like closing a window) when it goes into its "slow down" mode. It's like it's moving through molassis. Before this, I had a Macbook laptop & I never had slow downs like this. I would have thought "newer technology" would translate into better but not worse functioning. I have 4 gig of ram. I do use Photoshop, which is a ram hog. But like I said, I had this same configuration with the Macbook & no problems. What has changed other than the computer to the Mac Mini. Any thoughts on how I might remedy this? Thanks.

I too am having that same issue and I have had mine only a week. Mine is the bare minimum ordered for the new release.

PC slows down after a while when running labview application

I have a labview 6 application which is monitoring some data on a feildpoint module, after a while this application slows down and there is a lot of activity on the hard disk drive, also the cpu monitor says 100% activity.
Is it something to do with the PC or is it some other reason?
Thanks
Allan

Allan,
My first guess is "Who know's" without seing your VI and probing around; but, to get you started, run your VI and use Labview's tool "Profile VIs..." [Tools... Advanced...] and monitor memory and timing statistics. You may find a constantly increasing use of memory or a VI that consumes an unusual amound of processor time. Then you can troubleshoot from there.
Good luck with it, Doug

Server slows down after a while

Hi all,
I've a problem with a linux machine which slows down after running for
some days. It usually handles about 100 request per second and after a
while it goes down to about 5 requests per second. I'm running WL6.1Sp1
on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering if
this is related to some problem in my code or maybe rather is a database
issue. I took a thread dump, and the server looks idle. Does anyone see
something unusual in this dump? Does it indicate anything else than a
nearly totally idle server?
Thanks for your input!
Daniel
Full thread dump:
"process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
monitor [0xb75ff000..0xb75ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.UNIXProcessForker.run(Native Method)
     at java.lang.Thread.run(Thread.java:484)
"process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
[0xb77ff000..0xb77ff8c0]
     at java.lang.UNIXProcessReaper.run(Native Method)
     at java.lang.Thread.run(Thread.java:484)
"HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
waiting on monitor [0xb79ff000..0xb79ff8c0]
     at java.lang.Object.wait(Native Method)
     at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
     at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
     at java.lang.Thread.run(Thread.java:484)
"ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
[0xb7bff000..0xb7bff8c0]
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
     at java.net.ServerSocket.implAccept(ServerSocket.java:243)
     at java.net.ServerSocket.accept(ServerSocket.java:222)
     at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
"Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
[0xb7dff000..0xb7dff8c0]
     at java.lang.Object.wait(Native Method)
     at java.util.TimerThread.mainLoop(Timer.java:432)
     at java.util.TimerThread.run(Timer.java:385)
"ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
[0xba7ff000..0xba7ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
[0xba9ff000..0xba9ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
[0xbabff000..0xbabff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
[0xbadff000..0xbadff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
[0xbafff000..0xbafff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
[0xbb1ff000..0xbb1ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
[0xbb3ff000..0xbb3ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
[0xbb5ff000..0xbb5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
[0xbb7ff000..0xbb7ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
[0xbb9ff000..0xbb9ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
[0xbbbff000..0xbbbff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
[0xbbdff000..0xbbdff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
[0xbbfff000..0xbbfff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
[0xbc1ff000..0xbc1ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
[0xbc3ff000..0xbc3ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting on
monitor [0xbc5ff000..0xbc5ff8c0]
     at java.lang.Object.wait(Native Method)
     at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
     at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
     at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting on
monitor [0xbc7ff000..0xbc7ff8c0]
     at java.lang.Object.wait(Native Method)
     at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
     at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
     at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting on
monitor [0xbc9ff000..0xbc9ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
va:57)
     at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
     at java.net.SocketInputStream.socketRead(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:86)
     at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
     at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
     at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
     at java.net.SocketInputStream.socketRead(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:86)
     at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
     at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
     at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
     at java.net.SocketInputStream.socketRead(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:86)
     at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
     at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
     at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
     at java.net.SocketInputStream.socketRead(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:86)
     at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
     at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
     at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
[0xbe9ff000..0xbe9ff8c0]
     at java.lang.Thread.sleep(Native Method)
     at
weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
nagerImpl.java:1546)
     at java.lang.Thread.run(Thread.java:484)
"Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
monitor [0..0]
"Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
[0xbf3ff000..0xbf3ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
     at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
monitor [0xbf5ff000..0xbf5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
[0xbfffd000..0xbfffd220]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
     at weblogic.Server.main(Server.java:35)
"VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
"VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
monitor
"Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnable

There are several threads like the one below. I would think that they are the
problem. But I don't know what they are doing - doesn't look like any application
code.
Mike
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38 nid=0x5a9f
runnable [0xbe3ff000..0xbe3ff8c0] at java.net.SocketInputStream.socketRead(Native
Method) at java.net.SocketInputStream.read(SocketInputStream.java:86) at weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
) at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24) at
weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
============================================================
Daniel Hoppe <[email protected]> wrote:
Hi all,
I've a problem with a linux machine which slows down after running for
some days. It usually handles about 100 request per second and after
a
while it goes down to about 5 requests per second. I'm running WL6.1Sp1
on Linux with JDK1.3.1 and "-hotspot -ms512m -mx512m". I'm wondering
if
this is related to some problem in my code or maybe rather is a database
issue. I took a thread dump, and the server looks idle. Does anyone see
something unusual in this dump? Does it indicate anything else than a
nearly totally idle server?
Thanks for your input!
Daniel
Full thread dump:
"process forker" daemon prio=1 tid=0x82fe460 nid=0x5bf6 waiting on
monitor [0xb75ff000..0xb75ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.UNIXProcessForker.run(Native Method)
     at java.lang.Thread.run(Thread.java:484)
"process reaper" daemon prio=1 tid=0x82fdde0 nid=0x5bf5 runnable
[0xb77ff000..0xb77ff8c0]
     at java.lang.UNIXProcessReaper.run(Native Method)
     at java.lang.Thread.run(Thread.java:484)
"HighPriority TimeEventGenerator" daemon prio=1 tid=0x8148b98 nid=0x5ad6
waiting on monitor [0xb79ff000..0xb79ff8c0]
     at java.lang.Object.wait(Native Method)
     at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
     at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
     at java.lang.Thread.run(Thread.java:484)
"ListenThread" prio=1 tid=0x679c3c10 nid=0x5ad5 runnable
[0xb7bff000..0xb7bff8c0]
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:421)
     at java.net.ServerSocket.implAccept(ServerSocket.java:243)
     at java.net.ServerSocket.accept(ServerSocket.java:222)
     at weblogic.t3.srvr.ListenThread.run(ListenThread.java:255)
"Thread-2" prio=1 tid=0x83a3b68 nid=0x5ad3 waiting on monitor
[0xb7dff000..0xb7dff8c0]
     at java.lang.Object.wait(Native Method)
     at java.util.TimerThread.mainLoop(Timer.java:432)
     at java.util.TimerThread.run(Timer.java:385)
"ExecuteThread: '0' for queue: 'JMS.TimerTreePool'" daemon prio=1
tid=0x67680b10 nid=0x5ad2 waiting on monitor [0xb7fff000..0xb7fff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x676809e8 nid=0x5ad1 waiting on monitor [0xb81ff000..0xb81ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a8b358 nid=0x5ad0 waiting on monitor [0xb83ff000..0xb83ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65a873b0 nid=0x5acf waiting on monitor [0xb85ff000..0xb85ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JMS.TimerClientPool'" daemon prio=1
tid=0x65af9d88 nid=0x5ace waiting on monitor [0xb87ff000..0xb87ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6764bfb8 nid=0x5acc waiting on monitor [0xb89ff000..0xb89ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67951208 nid=0x5acb waiting on monitor [0xb8bff000..0xb8bff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67667450 nid=0x5aca waiting on monitor [0xb8dff000..0xb8dff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x679819b0 nid=0x5ac9 waiting on monitor [0xb8fff000..0xb8fff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6799ade8 nid=0x5ac8 waiting on monitor [0xb91ff000..0xb91ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6765d0b8 nid=0x5ac7 waiting on monitor [0xb93ff000..0xb93ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67903838 nid=0x5ac6 waiting on monitor [0xb95ff000..0xb95ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676688a8 nid=0x5ac5 waiting on monitor [0xb97ff000..0xb97ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676976e8 nid=0x5ac4 waiting on monitor [0xb99ff000..0xb99ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada048 nid=0x5ac3 waiting on monitor [0xb9bff000..0xb9bff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x6766e550 nid=0x5ac2 waiting on monitor [0xb9dff000..0xb9dff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x67630ea8 nid=0x5ac1 waiting on monitor [0xb9fff000..0xb9fff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65acf508 nid=0x5ac0 waiting on monitor [0xba1ff000..0xba1ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x65ada1e8 nid=0x5abf waiting on monitor [0xba3ff000..0xba3ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=1
tid=0x676ed050 nid=0x5abe waiting on monitor [0xba5ff000..0xba5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6762af98 nid=0x5abd waiting on monitor
[0xba7ff000..0xba7ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x676a0838 nid=0x5abc waiting on monitor
[0xba9ff000..0xba9ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon
prio=1 tid=0x6765c0d8 nid=0x5abb waiting on monitor
[0xbabff000..0xbabff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab6bf8 nid=0x5aba waiting on monitor
[0xbadff000..0xbadff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676865f0 nid=0x5ab9 waiting on monitor
[0xbafff000..0xbafff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676dfcb0 nid=0x5ab8 waiting on monitor
[0xbb1ff000..0xbb1ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676120f0 nid=0x5ab7 waiting on monitor
[0xbb3ff000..0xbb3ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67611fb0 nid=0x5ab6 waiting on monitor
[0xbb5ff000..0xbb5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67699720 nid=0x5ab5 waiting on monitor
[0xbb7ff000..0xbb7ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x67926328 nid=0x5ab4 waiting on monitor
[0xbb9ff000..0xbb9ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x6767e820 nid=0x5ab3 waiting on monitor
[0xbbbff000..0xbbbff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x65ab61a0 nid=0x5ab2 waiting on monitor
[0xbbdff000..0xbbdff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon
prio=1 tid=0x676cff58 nid=0x5ab1 waiting on monitor
[0xbbfff000..0xbbfff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765ff60 nid=0x5ab0 waiting on monitor
[0xbc1ff000..0xbc1ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon
prio=1 tid=0x6765f958 nid=0x5aaf waiting on monitor
[0xbc3ff000..0xbc3ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=1 tid=0x676f3818 nid=0x5aae waiting
on
monitor [0xbc5ff000..0xbc5ff8c0]
     at java.lang.Object.wait(Native Method)
     at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
     at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
     at java.lang.Thread.run(Thread.java:484)
"TimeEventGenerator" daemon prio=1 tid=0x676ffae8 nid=0x5aad waiting
on
monitor [0xbc7ff000..0xbc7ff8c0]
     at java.lang.Object.wait(Native Method)
     at
weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
     at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.
java:138)
     at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=1 tid=0x67646dd8 nid=0x5aac waiting
on
monitor [0xbc9ff000..0xbc9ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.ja
va:57)
     at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '14' for queue: 'default'" daemon prio=1 tid=0x6767ff00
nid=0x5aab runnable [0xbcbff000..0xbcbff8c0]
     at java.net.SocketInputStream.socketRead(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:86)
     at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
     at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
     at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '13' for queue: 'default'" daemon prio=1 tid=0x67929c90
nid=0x5aaa waiting on monitor [0xbcdff000..0xbcdff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'default'" daemon prio=1 tid=0x65aa0b58
nid=0x5aa9 waiting on monitor [0xbcfff000..0xbcfff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'default'" daemon prio=1 tid=0x65a9ed80
nid=0x5aa8 waiting on monitor [0xbd1ff000..0xbd1ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'default'" daemon prio=1 tid=0x679036d0
nid=0x5aa7 runnable [0xbd3ff000..0xbd3ff8c0]
     at java.net.SocketInputStream.socketRead(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:86)
     at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
     at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
     at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '9' for queue: 'default'" daemon prio=1 tid=0x6767fdc0
nid=0x5aa6 waiting on monitor [0xbd5ff000..0xbd5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'default'" daemon prio=1 tid=0x676680f8
nid=0x5aa5 waiting on monitor [0xbd7ff000..0xbd7ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'default'" daemon prio=1 tid=0x676123e0
nid=0x5aa4 waiting on monitor [0xbd9ff000..0xbd9ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'default'" daemon prio=1 tid=0x6766f658
nid=0x5aa3 waiting on monitor [0xbdbff000..0xbdbff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'default'" daemon prio=1 tid=0x67647858
nid=0x5aa2 waiting on monitor [0xbddff000..0xbddff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'default'" daemon prio=1 tid=0x67665970
nid=0x5aa1 waiting on monitor [0xbdfff000..0xbdfff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'default'" daemon prio=1 tid=0x676426d8
nid=0x5aa0 runnable [0xbe1ff000..0xbe1ff8c0]
     at java.net.SocketInputStream.socketRead(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:86)
     at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
     at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
     at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '2' for queue: 'default'" daemon prio=1 tid=0x65afac38
nid=0x5a9f runnable [0xbe3ff000..0xbe3ff8c0]
     at java.net.SocketInputStream.socketRead(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:86)
     at
weblogic.socket.JavaSocketMuxer.processSockets2(JavaSocketMuxer.java:273
     at
weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:225)
     at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '1' for queue: 'default'" daemon prio=1 tid=0x65aa1088
nid=0x5a9e waiting on monitor [0xbe5ff000..0xbe5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'default'" daemon prio=1 tid=0x6765ef78
nid=0x5a9d waiting on monitor [0xbe7ff000..0xbe7ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"Thread-0" daemon prio=1 tid=0x6764ced0 nid=0x5a9c waiting on monitor
[0xbe9ff000..0xbe9ff8c0]
     at java.lang.Thread.sleep(Native Method)
     at
weblogic.transaction.internal.TransactionManagerImpl$1.run(TransactionMa
nagerImpl.java:1546)
     at java.lang.Thread.run(Thread.java:484)
"Signal Dispatcher" daemon prio=1 tid=0x808d4b0 nid=0x5a9a waiting on
monitor [0..0]
"Finalizer" daemon prio=1 tid=0x8086ca0 nid=0x5a97 waiting on monitor
[0xbf3ff000..0xbf3ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:108)
     at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:123)
     at
java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:162)
"Reference Handler" daemon prio=1 tid=0x80851f8 nid=0x5a96 waiting on
monitor [0xbf5ff000..0xbf5ff8c0]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at
java.lang.ref.Reference$ReferenceHandler.run(Reference.java:110)
"main" prio=1 tid=0x804e750 nid=0x5a7c waiting on monitor
[0xbfffd000..0xbfffd220]
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:596)
     at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
     at weblogic.Server.main(Server.java:35)
"VM Thread" prio=1 tid=0x80821a8 nid=0x5a95 runnable
"VM Periodic Task Thread" prio=1 tid=0x808c220 nid=0x5a98 waiting on
monitor
"Suspend Checker Thread" prio=1 tid=0x808cb68 nid=0x5a99 runnable

Safari is slow to open and close. It also slows down other apps while running. Should I reload safari and if so, how do I do so?

Similar Messages

Maybe you are looking for