Safari issue: Multiple browser pages from the past are resident!

Having an issue with safari. When i open up the app, there are 7 previous pages that were accessed in the past that are open. I have tried to delete cookies, history, hard reset, etc. I can close out all of the previous open pages but the next time that a reset or power cycle is performed, they reappear! Has anyone experienced this same issue?
Scott

In Safari, press the little number icon in the lower right (I think the number tells how many windows are open). Then you can browse those windows (use your finger to move back and forth). Press the red X on any that you want to close.
That's what I do.

Similar Messages

TS1398 my problem is my iphone 4s is connected to the internet(wi-fi) with full signal strength but freezes when browsing and says "Cannot Open Page, Safari could not open page because the server stopped responding".

my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.

Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network

Issue in Dreamweaver PHP pages from the PHP template

I am learning to develop and publish a web catalog with a shopping cart feature attached. I am using PHP and MySQL as the tools to build this data driven website. However after creating the catalog list within the PHP template and needing the list as the menu within the sidebar of the webpages, the catalog list shows in the PHP template in Dreamweaver. But once I try to create a sub page from the PHP template, the list and all the contents does not show in the preview. After much checks, there is a issue with the sidebar class of the div, the issue is that a message shows that "Any content that does not fit in a fixed-width or -height box causes the box to expand to fit the content rather than letting the content overflow." I have tried to put the overflow:auto or overflow:hidden but to no success. How can get the catalog list to show without manually entering the over 50 categories that is already entered in the MySQL database? The template uses the 2 column fixed, sidebar, header and footer layout.

It's a little hard to understand your question and its context. Can you please upload this page and give us a link so we can see what you are describing?

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?

I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!

My apologies for the lack of photos, here is my post again with photos.
I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!
iPhone 6, iOS 8.3, Also an issue on my iPad mini iOS 8

Can't create multiple dependent LOVs from the same bind variable

Hi all,
I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
<iterator id="SelectStaticQueryViewObjIterator"
              Binds="SelectStaticQueryViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery1BindParameter"
              Binds="ExecuteWithParams1" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery1ViewObjIterator"
              Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery2BindParameter"
              Binds="ExecuteWithParams2" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery2ViewObjIterator"
              Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
Thanks
George

Hi all,
Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
Cheers
George

Could not browse pages from IIS after re-installation of Oracle client

Hi all,
Unfortunately, I hit a issue today in the morning. I could not browse pages from IIS after I re-installed my oracle client on my machine. Below is the error massage from browser.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 174: <healthMonitoring>
Line 175: <providers>
Line 176: <add name="OracleWebEventProvider" type="Oracle.Web.Management.OracleWebEventProvider, Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" buffer="true" bufferMode="OracleNotification" />
Line 177: </providers>
Line 178: </healthMonitoring>
Source File: c:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\Config\machine.config Line: 176
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
When I comment a line for OracleWebEventProvider in health monitoring providers in machine.config, it works fine for me. But, Im wondering what went wrong during re-installation and how do I rectify this issue with out a temporary workaround.
Please let me know your suggestions in this regards and thanks for the help in advance.
Regards,
Kumar

After I ran the "uninstaller" on the Oracle CD .. there were services still in existance, however, once I deleted the c:/Oracle folder, they were gone. I also re-booted the pc and double-checked, before I tried re-installing.
Thanks !
Tammy
Hi,
look into services, is there any services is still exist or running with the same name.
or give any other SID which you have given previously.
Yogi
[email protected]

InDesign CC fails to remove the pages from the catalog that I have prepared! [was: HELP!!!!]

InDesign CC fails to remove the pages from the catalog that I have prepared!
It stops the program suits the times and I have to make a forced exit!
This puts a very important issue!
We seek the solution in the short term.

Just done: the application crashes trying to export IDML!!!
This is not a good sign. Try moving the pages to another document using the Pages panel menu.
But you should also try copying all the items on one page and pasting them into another document.
Then when you've got a few pages in the new document, try moving or deleting them. Or try exporting as IDML.
Also, build a completely new sample document (doesn't have to be all the information) from scratch and try deleting/moving those pages.
This will help us see if it's just one document or all.

Open HTML page from the stage

How can I open a HTML page by pressing a button on the stage?
I've created a rollover button and I'm trying to make it open
an existing html page from the local disk (not an internet URL).
But I can't make it open with Lingo or behaviour.
Please help.
Thanks a lot.
Gideon.

goToNetPage "
http://somewhere.html" is the
typical form for a page on
the web, director must use the address format the system's
browser uses
for local files, this is somewhat platform dependant, a
practical
aproach is to open the file in question from within your
browser then
copy and paste the displayed address into your lingo code.
Some report the goToNetPage counterpart provided by the
buddyAPI xtra
works more reliably, the xtra can be used for free if limited
to a
couple of functions.
An alternate approach buddyAPI can use is to have the browser
directly
access the html file as if it were double clicked in the file
manager
using the same form commonly used to open PDF files with
acrobat.
(sorry I don't have example code handy)

I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?

I cannot open Pages from the app or from a saved document on the desk top. I get an error: "The application Pages cannot be opened -1712" Any suggestions?

The following previous discussion has a solution that worked for a variety of people with the -1712 error on a variety of applications and may help: The application Safari can't be opened -1712

Multiple CSV exports from the one button or pl/sql procedure?

I need to have multiple csv exports from the one press of a button. The easiest way I found to do this is it to use javascript to popup three windows, each as a CSV link. This is a bit ugly though, and leaves the browser popup windows open when the file has been downloaded.
I guess I could also make a solution based on branching, but I think that would be difficult to maintain and reeks of bad design (im not a fan of this spagetti GOTO style code!).
I implemented Scott's custom CSV as found here: http://spendolini.blogspot.com/2006/04/custom-export-to-csv.html
However I would like to know if its possible to download more than one file using this method. I could not work out how to do this .
Has anyone got any ideas? Simply repeating the code puts the second table into the original csv file. Is there a way to 'reset' the htp writer or smoething?
Any help greatly appreciated,
Alex

Sorry for the confusion - I guess I mean its easy in .NET because you can simply compress files together and then send 1 zip file down as the response. See http://www.developer.com/net/net/article.php/11087_3510026_2 for details.
I guess I could ask how to do this in APEX - but it seems to me that my original wording addresses the concept at a much more abstract level. I may not find the best solution for my problem if I just asked 'how can I dynamically zip together three tables as seperate files and send them to the client?'. I also suspect that this method is not possible in APEX without custom packages. Please prove me wrong!
I guess even if I could find some kind of javascript that didnt open a new window, but was a direct download to the CSV, that would be a good compromise. At the moment when you click on the link, three windows come up and stay blank until the files are ready for downloading. Then after the files have been downloaded the windows must be shut manually. Yes, I could use javascript to make the windows 1x1 pixel perhaps, and then shut them after a predetermined timeframe - but this is hardly an elegant solution!
Thanks for your responses.

Safari could not open page because the server stopped responding

"Could Not Open Page.... Safari could not open page because the server stopped responding"
....but it could worked just fine for the first 2 weeks of iPhone4 ownership.
WiFi network at home, working fine with MacBook, visiting friends' phones, my new iPhone4 - no problems. Had to power down the modem & router very briefly last night. Rebooted, MacBook connected fine, iPhone doesn't - it goes through the motions - shows all signs of full connection, full signal, password accepted etc etc - but web pages will not open, displaying after 30 secs the warning message above.
Tried at work on another wireless network - same response.
Have gone through all the FAQs, reset network settings, forgotten network etc - still nothing.
Anyone experienced the same and fixed it?
cheers

I'm having a very similar problem, but it's with my 3G connection, not with wifi. The display tells me there is 3G connectivity, and I get the loading symbol, but pages stop loading a few seconds after I try to open them, and some time later I get the "server stopped responding" message. That happens with addresses I know are working, such as Google. Some times, restarting the iPhone or the internet connection (by switching plane mode on and off) solves the issue, but it has been happening often these days.

How to exclude last page from the total number of pages counter

Hi,
I am customizing the payables remittance RTF template, our requirement is to reset page number to 1 for each payment, i am able to achieve this using "@section"
also we have a requirement to have a summary page at the end, i am able to get this using "start@last-page:body".
issue is last page is also considered in the page counter of the last payment.
i.e. suppose if i am generating remittance for 2 payments which are printing details in two pages and one page respectively, my output will have total 4 pages and it's showing
Payment1 page-1 footer -> 1 of 2
Payment1 page-2 footer -> 2 of 3
Payment2 page-3 footer -> 1 of 2
Summary page-4 footer -> 2 of 2
but i wanted to see
Payment1 page-1 footer -> 1 of 2
Payment1 page-2 footer -> 2 of 3
Payment2 page-3 footer -> 1 of 1
Summary page-4 footer -> 1 of 1
Any idea how to remove the summary page from the page counter.
Rgds,
-Kamal

I'm not sure how it was in Acrobat 9, but in XI you add a Header/Footer and
one of the options it "Page Number and Date Format", where you can select
the format of the page number to add, some of them contain the total number
of pages (such as "1 of n").

Cap5: User must get a certain page after closing the browser page in the middle of a quiz

Captivate 5, Output Flash10, LMS Cornerstone, majority of the users use IE7.
The 10 quiz pages (always followed by 2 text pages ---> 30 pages) do not have TOC activated. So there is no bookmarking.
Sequence:
40 text pages --- 30 quiz pages --- 10 additional pages linked from buttons of the first 40 text pages.
If the user closes the browser page in the middle of the quiz, no bookmark was set.
When he starts the module again, he would just see the message "Loading".
I'd like to open the module and lead the user to the beginning of the quiz.
Any ideas?
freddy209

Hi Freedy!!
I think I have seen this before. Please try the following solution :
http://helpx.adobe.com/captivate/kb/projects-published-captivate-5-lms.html
You need to replace your CPSWF9Template.dll from the installed location. Be careful to choose the one meant for your Captivate version.
Thanks,
Anjaneai

Can I reload a totally "clean" version with nothing brought forward from the past. I was hacked and don't want to get Vorstan automatically on my system? Thanks

I got infected with Vorstran (or Vorstan?) many months ago. I'd love to reload Firefox now that I have everything straightened out on my computer, but in the past when I had to reload Firefox, all my old book marks, came back. (They must be saved to load for me the next time I heed to reload??) Not wanting to get Vorstran back on a reload, I have hesitated to try to reload as when it comes in, it infects all browsers, overwrites my backups and generally locks itself in the system Can I get a totally clean version of Firefox to load to completely start over?? I don't want to bring anything forward from the past at all. No book marks, favorites, folders, nothing. Can that be done somehow so I can finally again use my favorite browser? My old email that is now closed, was "[email protected]". I had to change it to the current one "[email protected]" How would I go about getting a totally clean version of firefox? Thanks
Dennis Bloomquist
<sub>edit: removed personal information for your protection. (philipp)</sub>

Hi
if you are absolutely, 100%, completely certain that you want to start from scratch (after having made sure that your system is clean of the malware);
To completely remove your old profile, you must manually delete the Firefox folder;
# Click the Windows Start button, and select Run….
# Type in %APPDATA% in the Run prompt then click OK.
# Open the Mozilla folder.
# Delete the Firefox folder.
Next, install a clean copy of Firefox from ([https://www.mozilla.org/en-GB/firefox/new/ link]).
Welcome back, we've missed you.

From the past 3days,i can't install apps from the appstore,it says "this items can't be purchased right now,try again later", please help me,thank you

From the past 3days,i can't install apps from the appstore,it says "this items can't be purchased right now,try again later", please help me,thank you

Hey Kay97,
These are some troubleshooting steps that might be relevant to your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Safari issue: Multiple browser pages from the past are resident!

Similar Messages

Maybe you are looking for