Safari issues after updating to Mac OS X 10.8.5

I recently upgraded to the newest version of Mac OS X 10.8.5 in my Macbook Pro. I am limited on memory and did not upgrade to Mavericks OS X. Ever since this upgrade I have not been able to open Safari or my Canon Navigator (to scan documents into my computer for email purposes). Upon trying to open Safari, all I get is a spinning wheel. It never opens; I have to force quit the application (and it says not responding). The Canon Navigator opens and immediately closes and issues an error report. Please help. I have all of the websites that I use for business stored in my bookmarks bar, and I do not know how to access them otherwise. As far as my Canon printer, I have to scan signed documents and email the return documents, but am unable to utilize this either. I do not have fax capabilities, so at this moment I am at a standstill.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

After updating my mac book pro to the osx yosemite.am getting some issues after starting up.a soon as it gets on the destop the screen start blinkingand i cant do anything

After updating my mac book pro to the osx yosemite.am getting some issues after starting up.as soon as it gets on the destop the screen start blinking and i cant do anything.Please help me!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Safari, App Store Issues after updating to 10.7.2

I have been running my imac that came preinstalled with Lion
I am having this wierd issue after updating to 10.7.2 recently
When i run Safari, App Store, Itunes, i can see its loading..
but after 2 hours its still loading.
It just seems to be stuck and its not the Beach ball.. So i dont think it hanged
Its not a network issue as well, since i am typing this on Firefox, which is running perfectly
What could be the reason?

I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
Scott

Hello, my 1st time here..after updates my mac yosemite my illustrator can't open. It ask me to install "legacy Java SE 6 runtime" it also affecting my dreamweaver and flash rest are fine. Im bought adobe creative suite 6 DWP. thanks

hello, my 1st time here..after updates my mac yosemite my illustrator can't open. It ask me to install "legacy Java SE 6 runtime" it also affecting my dreamweaver and flash rest are fine. Im bought adobe creative suite 6 DWP. thanks

rezala,
You should be able to get round the issue altogether without the legacy version (and its security implications), by following this:
http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
It is even more thoroughly described in this thread, see post #3 on by gator soup:
https://forums.adobe.com/thread/1706469

After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore

After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
Anyone know what is wrong with it??
Is something wrong with mountain lion or the wifi itself????
HELP PLEASE!!
I need to use the internet desperately but i cant...
Thank you so much xxx

Hi galleryskins,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
OS X Mountain Lion: Zoom content on the screen
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
I hope this information helps ....
Have a great day!
- Judy

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

Syncing issues after updating to 10.3.1.55

After upgrading to itunes 10.3.1.55, today, it no longer recognizes my iPhone 4. I plug it in, the iPhone makes its normal syncing noice. I get a prompt, like always about it recognizing the camera and how i want to handle it. I cancel it, as usual, and then it never shows up in iTunes. I close itunes, connect my phone and it does not start itunes as it normally should. No error messages, just no response. Can anyone help with ideas?

I had the same issue, after updating to 10.3.1.55 it would error out saying something along the lines of not being able to read the catalog or something. I think the error even states do a restore to fix it. Last night that is what I did, clicked restore and then had it transfer all my items back. I'm glad I had just synced my phone prior to the update so the restore was really current.

Should I repair permissions before or after updating to Mac OS X 10.7.2?

Hi,
Should I repair permissions before or after updating to Mac OS X 10.7.2? or should I fix permissions before and after the update?

This is not a routine maintenance. Upgrades can be screwed up if the system that is upgraded is screwed up. I believe in a "better safe than sorry" approach. If you repair permissions and the hard drive prior to an upgrade then if there be a problem perhaps that problem will not propagate to the new upgraded system. If there are no problems doing the repairs is harmless.
When it comes to the topic of permissions repairs there are many opinions but not much fact. In other words there doesn't appear to be a formal analysis of whether repairing permissions is only useful when a permissions problem arises. But there is a lot of anecdotal evidence suggesting that a repair both before and after a major system upgrade can reduce the risk of problems.
This is my opinion on the matter. I do not generally disagree with Niel or MacJack, but as I said I prefer to be safe rather than sorry.
Here's my general approach:
How to Install Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade to Lion:
Purchase the Lion Installer from the Mac App Store. The download will start quickly. Lion is nearly 4 GBs so a fast internet connection is essential. Download time could run upwards of 4 hours depending upon network conditions and server demands at the time.
Boot From The Lion Installer which is located in your Applications folder.
Follow instructions for installation.

IWeb Problems after updating to Mac OS X 10.6.3

"iWeb quit unexpectedly while using the SFWordProcessing plugin"
- This message comes up every time I try to click on the homepage or "welcome" section. I had a similar problem with 10.6.2 but that was quickly solved by removing the Hoefler text. I have also tried removing the p.list and iweb domain file but nothing has been successful yet.
Any help would be appreciated.

Welcome to the Apple Discussions. Try the following fixes:
The million dollar trick or how to fix iWeb in 10.6.2
iWeb & iWork: Applications may suddenly quit after updating to Mac OS X v10.6.2
OT

Can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!

can't play mov files after update for MAC OS 10.6.8. Can't edit in Final cut anymore!. SHould i by a registration code for QT 7 Pro? I can't play mov files at all.. they were okay in my final cut time line. Now i can't see them!!! I can't import movies from my camera!!!
Help from Brazil!!!
Tks

David,
tks for your help !!!
Hi people, first, tks for Birdman308 for his link
https://www.hightail.com/dl?phi_action=app/orchestrateDownload&rurl=https%3A%2F% 2Fwww.hightail.com%2Ftransfer.php%3Faction%3Dbatch_download%26batch_id%3DOGhkZ28 xeWFiV3dYRHRVag
and makbookpro as well for his link
http://blog.lib.umn.edu/mcfa0086/discretecosine/164630.html
Now i can back to work!!!

Firewire epson R2400 issues after update to 10.8.4 will not print causes system shutdown

anyone had similar issue and or a fix?

issues after update
Download and install new drivers from the Epson site for your printer model.
Epson Stylus Photo R2400, Drivers & Downloads - Technical Support - Epson America, Inc.

We can't package links after updating to Mac 10.9.2

We can't package links after updating to Mac 10.9.2

From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

Issues after updating iPhone3GS to iOS5 on TIM cellular data network (Italy)

Hi everyone
I have issues after updating iPhone3GS to iOS5 on TIM cellular data network.
After installing iOS5 I had to switch from apn ibox.tim.it to wap.tim.it
Since then the phone is unusable for any internet activity that is barely "data demanding" (e.g facebook app take literaly hours to update), everyting requires way to much time... the iPhone is not an iPhone anymore... it's worse than my blackberry with just GPRS on it.
TIM technical support suggested me to switch back on apn ibox.tim.it, but then I would not be able to use internet tethering anymore (they say because of Apple iOS5) ... to bad I need internet tethering for work.
I am seriously thinking to switch ISP or phone.
Anyone did experience same problem / found a solution?

Hi Raia.D,
Welcome to the Support Communities!
The first thing I would suggest is to restart your iPhone. Then tap the Settings app, and you should see Cellular listed on the main settings screen. You should see Airplane Mode, Wi-Fi, Bluetooth, and then Cellular.
Here are some additional troubleshooting steps to try:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Judy

HT1338 After updating my mac to the new operating system I have had several problems. Now my printer program is not working.

After updating my mac to the new operating system I have had several problems. Now my printer program is not working.
Do you have any suggestions?

Start by telling us what printer you hope to use.
Look at the printer manufacturers site to see if they have a 10.9 print driver.
Assuming you have tried to delete & re-add the printer it's possible that the model is no longer supported.
You can also try the printing system reset…(I think 10.9 is the same as the Lion instructions).
http://support.apple.com/kb/HT1341
If the model is supported you should be able to add it & the driver will be downloaded.

Safari issues after updating to Mac OS X 10.8.5

Similar Messages

Maybe you are looking for