Safari Issues with 10.5.3 update

Most of the topics dealing with Safari's issues with the update have to do with it connecting to the internet. I don't have that problem.
Ever since I downloaded 10.5.3 Safari slows down all of my computer's processes. For example, if I open Safari, wait for the homepage (gmail) to load, then try to open any other program, I get the little color wheel for about 5 minutes. Then it loads - try and click anywhere on my computer - little color wheel for another 5 minutes. None of this happens when Safari isn't open.
I've run disk utility about 10 times, but I'm no apple expert so I have no idea what I can possible do after that. Has anyone experienced this problem or have know of any fixes?

No Safari enhancers installed
The CPU is running consistently at around 16-18.
Yeah - I figured most people don't see this problem. I don't think I mentioned it was an all encompassing error, I just used the 10.5.3 update as a time line to point when the problem started.
The issue seems to decrease when I am connected to my school's network rather than my home network, which has me worried that it has to deal with my network at home. I didn't notice this distinction before. Now that I have though - I'm going to read through the topic dealing with networking to see if their is a solution there, but from what I have glanced over thus far, my issue is different.

Similar Messages

Any issues with latest 2014 ios update & Straight Talk

Hi, I've been with straight talk for about 2 weeks without any problem - switching --porting--pics.....all went well . Now my phone ( iPhone 3c) shows iOS update waiting..
Due to all I have read here & there,I'm a bit uneasy to do the update. Has anyone had any issues with lates t2014 ios update using ST? Will it affect the working of the phone if I don't do update? Thanks for any input.

Hi, Glad that worked for you. I don't know why this is happening other than to offer an opinion. This hardware acceleration was causing an issue with the previous version of FP also. I think that this technology is ready but the websites are not, youtube included.
The same thing happened with Flash Player for the mobile phones, Android in particular. Adobe was ready but had to wait on Google to catch up. So the users thot Adobe was at fault, but that wasn't the case. Google had to update and that was done with their 2.2 update. This is not an opinion however. I followed this because users were coming here asking why Flash Player wasn't available for their Android:-)
Adobe/Microsoft/Mac/Linux are all involved and if one advances a particular technology that effects the others, then each one must make a change for that technology to work. At least that's how I see it.
Thanks for marking your thread as answered
Regards,
eidnolb

Issues with ios 8.3 update on iPhone 5

After updating my iPhone 5 to ios 8.3, I am unable to stream purchased music and videos from iTunes or any podcasts. I also can not stream videos on YouTube, Netflix, or Safari. Nothing works on both Wi-Fi and my normal data. If I could I would try to turn off the phone and restart but unfortunately my iPhone 5 is one of the ones that has the faulty lock button that needs to be repaired. But besides that, has anybody else been having issues with streaming music and videos?

i'm looking for people with problems on iphone 5 with 8.3 because i'm still on ios7 and considering to upgrade
but if you have problem with turning off the phone,
you can set up "assistive touch" from setting > general > accessibility > assistive touch (down the bottom)
you can also set this on the accessibility shortcut for the triple click on the home button to show/hide the assitive touch
you'll see a black circle floating on the screen somewhere. you can move this thing around if it blocks what you want to see/tap
now to turn off your phone you can tap the assistive touch button > device > tap and hold the 'lock screen' icon until the power off slider comes up.
so you don't really have to fix the lock button

Safari issues with Tabs, Video, and Java

Hi. I updated to Lion and Safari 5.1 and did all the software updates. I have a MacBook from 2008. For some reason, I am having a lot of issues with Safari. I hope someone knows what I am doing wrong.
1. Every time I open Safari after I turn on my computer or it wakes up from sleep, I have to do an internet test to get the computer to realize I am still connected to my house WiFi.
2. The computer goes to sleep after 30 secs. Can I change this somehow?
3. I cannot open any videos from YouTube or vidoes my friends have posted on Facebook.
4. I used to be able to drag a link over an existing tab and it would automatically go there. Now I have to drag it to the + sign to get it to open. (command click still works)
5. I tried to check my plug-ins to see if that was the problem. I put all of my internet plug-ins in the trash and added them one by one. Safari seemed to work a lot faster, but then as soon as it went to sleep, I had the same issues. Also, I can't find Java anymore (not in my trash, didn't delete anything from the trash) and I did the java test on a website and it's not showing what it's supposed to. All the software updates say it is fine, but obviously it isn't.
I know this is a lot of stuff, and most of it is probably due to me not really understanding how my mac works. I've been looking through the forums to see if anyone else has all of these issues; after an hour and a half of reading discussions, I gave up. Any advice would be really appreciated. Thank you.

So, while waiting for some help, I've been continuing my own research.
3. It turned out that it wasn't Java messing with my videos. I just needed version 10,3,181,34 of Adobe Flash and now all videos are working. Hope that helps if anyone else was having similar issues. Here's the link if you need to find out which version you have: http://www.adobe.com/software/flash/about/
4. It turns out that there are several other discussions regarding people who can't drag and drop links into Tabs on Safari. My solution was to write to Apple to ask if they can put that feature back in.
5. I'm not sure if I am still having Java issues, but so far everything I am needing to upload and watch is fine.
One and two are still annoying, so I'll continue to look for solutions. If anyone has any suggestions, I'd appreciate them. Hope this helps someone as much as it helped me. I don't want to throw my computer against a wall every 5 seconds now.

Acrobat 9 Pro issues with printing and now updating !!! :(

hello
I had an issues with printing from my gmail account or from windows live mail
so I made a complete re-installation
now I am stuck with version 9.3.0 and when I check for updates I get a message
UPDATER IS ALREADY RUNNING
only... it's not running and nothing is updating !
I made a restart... just in case... it did not change anything
as to the printing issue, in case some of you have met it and cleared it...(hope)
this was with version 9.5.0
I get no error message but no pdf is created, only a text document with this :
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
72gmvi not found, using Courier.
44dcmta not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
[96 96 97 72 96 42 64 0]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
not a good start for my week... I hope yours is nicer
I'm running Win7 Ultimate x64

thanks Mylenium
the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
does my question make sense ????

Possible Issue with Latest Office 2001 Update

In the last few days my MB Air mid-2013 with Mavericks did an Office 2011 update to Version 14.3.9. Today I used it for the first time and Excel crashed each time I tried to use it. To get the job done I had to revert to the earlier build (version 14.3.8) from a backup and that appears to work normally.
I don't know if this is an issue with Mavericks or if the update to 14.3.9 would have crashed with ML, too. Nor do I know if Word would have crashed since I had to get the task in Excel done before an appointment.
Phil

Apparently cannot edit the above. Title should have Office 2011, not Office 2001
Phil

If you are having WIRELESS issues with SNOW LEOPARD.. update your software

the latest osX update seems to have fixed the wireless issue with snow leopard

I never had an issues with wireless before. Still don't. What was the problem?

Issues with latest Illustrator CC update

Issue with the latest update of illustrator CC on windows 7
When copping large elements in illustrator its crashing and its crashing when dragging them across to Photoshop. I didn't have this problem until I updated yesterday afternoon.
Its also not opening PDF files if illustrator is already open. If illustrator is closed then I choose to open a PDF in illustrator it will work, but not if a document is already open in illustrator. Will not open from bridge either, but drag and drop does still work.
I'm having to revert back to CS5 until the problem is resolved as its destroying my work flow

_Phi_
Thanks for reporting the issue to AI team. Will it be possible for you to share the AI file with me at [email protected] ?
I want to try the workflow at my end.
With Best Regards,
Raghuveer

Safari issues with online banking

my bank tells me that the issues with online banking are a Safari issue.

Feel free to read my thread here: https://discussions.apple.com/message/18057998#18057998

For those with Issues with the Recent GB update... what you can do to help fix this...

I had my phone replaced by Verizon because the volume was ringing too low with disregard to the level it was set on... this happened immediately after the update and continued even with factory reset. Verizon sent me another one which is doing the same thing but with more issues which include the picture sending and now my mute button is missing when I receive calls. I am a business and cannot afford to miss a single call... especially as this is our slow time of year. To do your part to help push Samsung to send out a corrective update you need to contact them... I did this and a verizon rep told me to encourage this on these forums... here is the link http://www.samsung.com/us/support/contact# it will get you to their contact page and from there you select email under product support. The more of you that do this, the more they will realize there are several... some serious... issues with this update. Thank you and good luck... to all of us!!

I noticed with my Charge phone that when I get a call the FIRST ring is highly muted (quite soft) and then all rings after that are full volume.
I wish that even the first ring was load (full volume) but I accept the fact that that is how GB 2.3.6 works. Anyone know how to change this?
Ya can't win 'em all.
JerryF

Some issue with appstore and software update

Hi all,
I have some issues with app store and software update.
Sometime App Store report that it was available software update for Mac OS X ML. When I enter in App Store to upgrade something goes wrong and I cannot do anything.
If I close and open again App Store, it start to look for update and aftware 5-10 seconds App Store reports that there aren't update available.
I take a look in /var/log/install.log and I found this:
Jun 4 01:40:54 XXX.local Software Update[6741]: Can't load distribution from https://swdist.apple.com/content/downloads/03/60/041-5259/K4G5rj8jSCBBxxxLM2XHpjPJdGspgBHzFX/041-5259.English.dist.gz: Host cert invalid or otherwise insecure download
Jun 4 01:40:54 XXX.local Software Update[6741]: Failed Software Update - trust evaluation failed in SecTrustEvaluate with result: 5
Jun 4 01:40:54 XXX.local Software Update[6741]: Can't load distribution from https://swdist.apple.com/content/downloads/32/52/041-5688/9zts9cfPJssQJdHBjQ2TFM5yxSgqwrT6rM/041-5688.English.dist.gz: Host cert invalid or otherwise insecure downlo
Jun 4 01:40:54 XXX.local Software Update[6741]: Failed Software Update - trust evaluation failed in SecTrustEvaluate with result: 5
Jun 4 01:40:54 XXX.local Software Update[6741]: Can't load distribution from https://swdist.apple.com/content/downloads/21/24/041-5260/876hzpgDST2NBNK2LKmjpPBhDwrL94sJ9x/041-5260.English.dist.gz: Host cert invalid or otherwise insecure download
Jun 4 01:40:54 XXX.local Software Update[6741]: Removing package source SUContentLocatorPackageSource from manager
Any ideas?
Thanks
Regards

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be an item named System. If not, select
File ▹ Add Keychain
from the menu bar and add the following item:
/Library/Keychains/System.keychain
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu at the top, select
When using this certificate: Use System Defaults
Close the inspection window. You'll be prompted for your administrator password to update the settings. Revert all the certificates with non-default trust settings.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Log out, log back in, and test.

Clientless SSL RDP Plugin Issues with Java 1.7 update 45

Hi All,
It appears the latest Java update (1.7 Update 45) has caused some issues with the Cisco RDP plugin for Clientless SSL VPN.
When attempting to run the plugin to connect to a host, the following error message is receieved:
I believe this may be because the plugin is unsigned which on the previous version of Java seemed to cause pop-ups prior to running. This error seems to occur in both IE and Firefox. The OS is Windows 7.
I can confirm that the previous version of Java (1.7 Update 25) worked OK with this plugin apart from the warning mentioned above.
Does anybody know of a work around or a fix for this? Does Cisco have to update their plugin for this to work on the latest Java version?
Regards
David

Hi Jouni,
Thanks for the reply. From the thread you linked:
The workaround posted in the Cisco Bug is to uncheck the setting "Keep temporary files on my computer" which is found in the Java Control Panel under the General Tab / Temporary Internet Files / Settings ...
This workaround has worked for me with Jave 7 Update 45 on both PC and Mac.
I've just tested this and it has resolved the issue for me.
Thanks!
David

Issues with cloud since maverick update

Ever since i installed the new maerick update, my Cloud is not working properly. My passwords with my i-products all seemed "off" and the google password I had I've had to redo several times depending on which i-unit I'm on....I'm not a techie, and when I can't access my Contacts from my phone its too much to handle. (& maybe that is another problem, not sure). I'm very frustrated.

This is a known issue with Mavericks. Hopefully, the next update will address this.
You might want to post over in the Mavericks community support area to keep up to date on this.
OS X Mavericks

Mail formatting issues with 1.1.1 update

With the 1.0.2 firmware HTML-formatted e-mail displayed correctly, if a bit too small to read, just like web pages do. Just like web pages, I could double-tap on - say - a table or a bit of text to zoom in and/or use pinch gestures to zoom in and out.
Now when I look at the same e-mails that looked so good in 1.0.2, my iPhone re-formats and re-flows the e-mails into gibberish, kinda like PocketIE does on Windows Mobile. One e-mail (a hotel registration confirmation) had the header re-flowed into 60 or 70 lines of one character each. The daily status messages I get from my SBS2003 server - which were completly unreadable on my old XV6700 with WM5 - looked great on 1.0.2. With 1.1.1, the tables are scrunched up, many text fields have a second or third line with one or two characters on them, ect.
Anyone else notice this? It's annoying enough that I'm almost willing to give up the other 1.1.1 features to get my mail working right again.

Solved the problem with bit locker (and refresh and reset and a couple of other things that rely on the windows boot manager by reinstalling windows (went to Windows 10). That also solved my issues with high Cpu when playing YouTube videos and photoshop crashes due to the fact that Windows 10 loads the latest Intel drivers.
Unfortunately the issue of Bluetooth mouses freezing still happens, though only twice yesterday, so that's an improvement.

Issue with Anonymous Authentication and updating or starting new projects

So 2 weeks ago I had a post about Anonymous Authentication found here:
https://social.technet.microsoft.com/Forums/office/en-US/9b0e6eec-190a-4b48-a280-6adef441659a/issue-with-anonymous-authentication-and-people-picker-and-reports?forum=sharepointgeneral&prof=required
That issue has been resolved but has created a new issue. We have Anonymous Authentication disabled but when one of our users tries to make a new project she gets the following:
Unexpected response from server. The status code of response is '0'. The status text of response is ''.
When she tries to edit an existing project, she gets the following:
The server was unable to save the form at this time. Please try again.
If I re-enable the Anonymous Auth. everything works for her again, but then we face the issue from the original post with reports not publishing.
Any ideas on how to make everything get along?

#apDiv2 {
    position: absolute;
    width: 698px;
    height: 299px;
    z-index: 1;
    left:50px;
    top: 117px;
    overflow: scroll;
Don't forget to fix your code errors. You're still missing a <body> tag in your markup.
Nancy O.

Safari Issues with 10.5.3 update

Similar Messages

Maybe you are looking for