Safari it will not advance past the first page of a PDF Document

Running Safari 5.1 under Snow Leopard 10.6.8 on a d MacBook Pro when I try to read a PDF document in Safari it will not advance past the first page. I get the first page of the document in the browser window. No navigation in the toolbar, the up, down, right and left arrows do nothing nor does the return/enter key.

If you are using Adobe Acrobat >  Apple Safari 5.1 and Adobe Reader/Acrobat Advisory

Similar Messages

  • I attempted to download a song. It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

    It originally did not download correctly. I refreshed the download and it supposedly completed. Upon playing the song in both my library and on the Itunes store it will not play past the first 5 seconds. How can I fix this?

    Hello Whitney262,
    Thanks for using Apple Support Communities.
    I would go ahead and make sure you can first download the content, then remove the song from your iTunes Library, and download again from your iTunes past purchases.  The article below will walk you through the entire process:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Take care,
    Alex H.

  • My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. Help?

    My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. I have tried several times to get it past this point but tnothing helped.
    I have an appointment at the Apple store today, but was wondering : will all of the information and files on my desktop be lost? Or is this a logic board problem?
    Any help is much MUCH appricated.

    I'm not sure, if you're out of warrenty it'll cost quite a bit for the replacement of the logic board replacement...unless you have apple care. you could ask apple to try and recover your hard drive but i'm not sure.    

  • My iPhone will not advance past the wake-up page when the Apple is displayed.

    I charged my 100% dead iPhone today via a USB port and afterwards it would, when turned on, not advance past the wake-up Apple display page, then would go back to charging.  What can I do?

    You'll probably have to put it in recovery mode in iTunes and restore it.  Hold the home button down while you connect to iTunes via USB 2.0 or higher, iTunes should pop up and say "iTunes has detected an iPhone in recovery mode" then give you the option to restore it.  Hopefully you had everything backed up....  Before you try that, though, you could always try doing a hard reset.  (hold down home and sleep/wake at the same time for about 15-20 seconds and see if it will boot back up to your homescreen.)  Hopefully you can do that and not lose any data.  But putting it in recovery mode and restoring it will at least get it working again.

  • How do I print only the first page of multiple PDF documents?

    I have about 1,500 PDF files (scientific papers) that I need to print only the first page of... Any suggestions on how to do this as a single job or as a few jobs? The files are organized in a bunch of different folders, so if there was some way to do this folder by folder, that would be ok too. Thanks!

    Make sure that in System Preferences Printing & Fax pane you set the default printer to the one you want to use, then put all of these PDF files into their own folder, then open terminal and type the following (without hitting return afterward):
    lpr -o page-ranges="1-1"
    Then drag one of the PDF files into the terminal window (it will add it's path to the end of your command) and replace the file name with *.pdf, so it will look like this:
    lpr -o page-ranges="1-1" /Users/todd/Documents/My\ Folder/*.pdf
    Then hit return.

  • I cannot load the Zynga game Pioneer trail, the game shows the loading bar as full but will not progress past the load page, The game works in other browsers.

    Only goes as far as the load page, and loading bar shows 100%

    You can check for problems caused by recent Flash updates and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *downgrade the Flash player to version 10.3 or 11.2
    *http://kb.mozillazine.org/Flash#Troubleshooting
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/

  • TS1424 Songs availble with album purchase only show downloaded with album but play will not play past the first few seconds of the song.  Solution???

    Purchased entire album.  Songs available only with album purchase show completed download with album, but play only a short demo of song (both PC and iPod).  This is my first iTunes purchase so I likely missed a step.  Is this a user of iStore error?  Solution(s)?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Ipod will not got past the home screen

    Help please!!!! When I turn my ipod on, (with a full charge and fresh restore and update) it will not go past the home screen (music, setting, ect). The hold button is off. The click wheel will move the selector up and down, but I can't go any further than that.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose your "stuff" with Recovery Mode.

  • Satellite L500 will not load past the 'welcome' screen

    Hi,
    My Toshiba Satellite L500 laptop will not load past the 'welcome' screen. The cursor thing just keeps going around and around but won't go to my desktop.
    Last night it went into some temporary profile and it had a message saying 'your other profile cannot load at this time please try again later'
    Any help would be greatly appreciated.
    Thanks,
    Kara

    The error message is not known to me and also searching in google didnt get any hints.
    Possibly your Windows OS is muddled up.
    Did you try to boot Win 7 in safe mode?
    Try this. Restart your notebook, tap the F8 key.
    In advanced boot options choose the option called Safe Mode.
    If the notebook does not allow booting in Safe Mode, try the option Last Good Known Configuration.
    If this didnt help, try Repair my Computer. Here you can choose between different settings.
    The one which could solve this is HDD recovery which helps you to set the notebook to factory settings. But this means also that your HDD would be formatted!
    So be aware of this!

  • HT1414 My iPad will not progress past the home screen. My computer will not let me back it up. What can I do?

    My iPad will not progress past the home screen, and my computer doesn't allow me to download my data from it. What do I do? I wanted to try to restore it, but I don't want to lose my "stuff".

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose your "stuff" with Recovery Mode.

  • I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

    I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
    I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
    The only things I did last night:
    -cleaned the history of Firefox out, including cookies
    -let it unplugged all night
    -plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
    -shutdown the computer since I was going out and thought it would help the computer charge
    -came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
    -tried turning it off and on to no avail

    Before doing a reinstall, which may not be needed at this point,
    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
    Then Repair Permissions.
    No need to report any Permissions errors........we all get them.
       DALE

  • Pages 2.0 will not get past the "getting started" screen

    i just updated pages to 2.0 on ipad 2 retina (ios 7.0.2) and now i cannot open pages, it will not get past the "getting started" screen
    has anyone else experienced something similar?

    Had the same problem. This sovled it for me:
    Just let it load.
    In Keynote, I didn't have so many documents, so the freeze didn't take too long- that's how I noticed it's just a freeze while loading.
    For pages it took much longer. You can also turn off iCloud in settings for Pages, Keynote, etc. open it, re-enable iCloud in settings app again and quick switch back to pages (double-click home button). It will freeze up again, but after a while after all documents have been pulled from iCloud, it will be back to normal.

  • My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

    Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

  • My 4th Gen Ipod touch will not get past the apple logo

    My 4th Gen Ipod touch will not get past the apple logo (unless the battery is dead, Then it tell me to charge it).  Once it gave me the connect to itunes screen.  I clicked restore in itunes but the ipod went back to the apple logo before the update download finished. I tried calling apple but my over the phone technical support just expired. PLEASE HELP! 

    This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
    1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
    2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
    3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
    4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

  • My iMac will not boot past the logo and spinning gear

    My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anything) can I do please?

    If you installed Lion onto your machine, it should have created a Recovery HD (hidden from view, but visible in Disk Utility with its Debug menu enabled, under Show all Partitions).
    That article states:
    Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
    Would I see the recovery menu (by holding down option on power up)
    Yes.
    if there was no recovery disc connected do you think?
    Shouldn't matter, since your int HD is always connected.

Maybe you are looking for

  • Win XP will not install on K9N4 Ultra based system, please help!

    Hello, i was hoping some1 could help me with a problem ive been trying to sort out for the past week or so.  After buying and building a new system i havent been able to get Windows XP to install, the setup formats and copies the initial files correc

  • Changing the XML Structure in "Submit as XML"

    Dear all, We have two PDF Templates which are submitted via a WebService using Submit as XML. For both templates we need the same structured XML output. Form 1 has the hierarchy like this (all subforms): Company Subsdiary Responsibles Footer so the x

  • Applicatio​n builder e run time

    To distribute my software created by application builder , I use "set up generator" program because I can use special colors, pictures and so on. Instead to run lvruntimeeng.msi (30Mb)separately, can I use only specific files (dll or something like t

  • IPhoto 6.0.5 Crashes when opening after asking to import photos not in lib

    Hi, I wonder if any one can help me with this. Each time i open iPhoto (6.0.5) I get a message stating "67 photos have been found in the iPhoto Library folder that were not imported. Would you like to import them?" if I click yes the program starts t

  • How to edit data selection(Date) for an Init Delta Infopackage

    Hi Experts, We have a Process Chain which contains an Delta Infopackage. This Delta Infopackage has a Data Selection (Date) condition which is till 12/2008. As well the same date selection is present in the init method as 12/2008. Also we need to cha