Safari loading issue

Recently, when i type in a web address in safari, or choose one of my bookmarks, the blue strip shows the page loading, but then stops half way, with no page loaded - it's as if Safari has frozen. If I hit the X in the browser address window bar and hit enter again, the page loads fine. Any help appreciated.

Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Similar Messages

Suddenly my firefox loads SO slowly. I launch firefox first and then Safari and Safari loads pages before firefox enen begins too. Also a LOT more adds show pages I looked at previously.

Several weeks ago Firefox suddenly was / is very slow to load all pages. I launch Firefox. Wait. Launch Safari. Safari loads page while I am still waiting for Firefox.
Why?

Do you use NoScript? There's possibly an issue with NoScript where certain settings cause Firefox to load HTTPS pages on startup very slowly.

Safari loads 100% CPU while opening a webpage when working in cooperation with DeviceLock

I have Safari 5.0.5 and DeviceLock 7.1 installed on same computer running Windows XP x86.
When I confugure any network protocol settings in Devicelock (to make its network module active), Safari loads 100% CPU while opening any webpage, for example http://www.apple.com/startpage/
This issue doesn't occurs on other browsers - Internet Explorer, Firefox, so I assume the issue belongs to Safari, not to DeviceLock.

It may not be DeviceLock, or Windows. I see (via Activity Monitor) Safari use 100% CPU while loading a new page on my G5 iMac. Then it drops back again. It may be something to do with Safari 5.0.5

Safari loading very slowly - Firefox loads immediately

I have seen a few postings about Safari loading slowly since the upgrade to Yosemite but this is really starting to aggravate me now. I am having no problem whatsoever when loading the same pages in Firefox - which in fact is how I am having to write this posting.
Is ti just me?
Any ideas greatly appreciated.

Linc
While I was aware of this posting I have my concerns about whether it is applicable in this case. It relates to Safari 5.0.1 or later - the latest version of Safari in Yosemite is 8.0 and I have not experienced any noticeable problems until the last few days - although the posting states that last amendments were made only 3 weeks ago its level of detail re Windows and referring to such an old version of Safari lead me to think it is quite a few years since it was written. Why has it suddenly happened? Why does Safari carry out DNS pre-fetching in the first place? What functionality am I losing by disabling it? If Apple are aware of this issue (and if they are not then how is it going to be fixed?) and they fix it in an update then how will I know it has been fixed? Will it be incumbent upon me to re-enable DNS pre-fetching to regain whatever functionality I lost when turning it off?
Sorry to ask all these questions but I hope you can see where I am coming from.
David

Safari loads slowly

Hi,
I use a MacBook (mid 2010) with 10.9.2 and Safari 7.0.3.
Safari load some pages very often very slow. Almost ever soundcloud.com will load very slow, sometimes also youtube.
Now I've Chrome installed and in chrome it works without problems.
I've already tryed to reset Safari, clean the cache, delete browserdata and -settings from flash and delete the Safari.plst. Also I've tryed the solution paths from apple (DNS). Nothing works.
No I've no idea anymore.
Do you have solution suggestions?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"and $((l-25)) more line(s)"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; p=`lsbom -pfc /var/db/*/*.BSD.bom | sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`; [[ "$b" && "$l" && "$p" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \; | awk '{print $3"\t"$1}' | grep -Fv "$p" | awk '{print $1}'`; Pm "Periodic scripts"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

SAP Mobile Sales 2.0 delta load issue for Sales Orders

Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad.

Report loading Issue

Hello all,
I am using Oracle 6i for report and oracle10g for the database.I have created a matrix report in oracle Report but which report taking so much time to show the output it almost taking more than 10 minutes,at the same time that query executed within 1 minute in toad which used in matrix report.
kindly guide me how to solve the loading issue.

I did not used any formula column in my report,all the values are taking from query.
But I used different types of format trigger in my report for the coloring purpose.Does it make any problem?

Data Load Issue "Request is in obsolete version of DataSource"

Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
Samit

Hi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu.

Problems with Safari Loading Sites and Photos

For the past week (Feb. 2015) I've experience problems with Safari loading websites on my 2009 20" iMac desktop. Running version OSX Lion 10.7.3 4 GB. Intel Duo Core 2.66 GHz
Mac also will frequently not upload photos at websites like Yahoo News or Facebook. It does this throughout the day.
So, I downloaded Chrome, thinking it would be a better browser if Safari is not functioning. Chrome is just slightly better, and when it won't load a website I get the following error message from Chrome: DNS_PROBE_FINISHED_NO_INTERNET.
I'm debating taking the Mac to the Apple store for diagnosis or repair today, but if anyone else is experiencing similar problems, could you please offer some solutions as to what is going on.
Thank you.
AngieRK

Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load - Apple Support
Unless you have a good reason not to, you should update the OS to version 10.7.5.

Index.php loading issue

I finished and uploaded a new site in .php.
I have a graphics loading issue only with IE.
The js accordion with images will not reload after returning to the home page.
Anyone out thier that can shed some light on this?
http://carpetcleaningsantabarbarapro.com/index.php
Thank you in advance
Crissymarie

Ken might be on to something. The current release of jQuery is 1.7.2 which is compatible with jQuery Cycle.
For the latest core library, you can link to jQuery's CDN like so:
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js"></script>
You have some improperly nested <h3> tags around your lists on lines 170 and 191. To keep your code error free, simply delete the heading tags.
Finally, as a courtesy to your site visitors, consider adding a cookie so people don't have to watch the Flash Spokesperson every time they go to your home page. The link below shows how:
http://alt-web.com/DEMOS/cookie-test-show-hide-flash-intro.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

TileList data load issue

I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?

Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

BI Load issue in the transformation/DTP after SP 17

Hello,
After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP.
See below the errors:
u2022 Messages for 101 data records saved; request is red acc. to
configuration
u2022 Thee is no active nametab in the system, although an active ABAP/4
Dictionary object was expected. Reactivate the ABAP/4 Dictionary object.
Also I have activated the DSO, transformation and DTP. Also I went to SE14 and try to adjust my DSO, SE11 and activate the table but still having the issue.
Can someone advise me on how to resolve this issue?
Thanks a lot.
Cesar

Hi,
Do the following: In BI, run transaction SE38 >> RSDG_CUBE_ACTIVATE to recreate the Metadata information
for the Info-provider.
Then execute another program via SE38: RSDD_RSTMPLWIDTP_GEN_ALL
See Note 1161940 and 1152453 for more details.
Regards,

BW sales load issue

I have a problem with this. The jobs in the screen snapshot below are running too long - 2LIS_11_VAITM, 2LIS_11_V_ITM, and 2LIS_13_VDITM. They use to run for just a couple of minutes. The job configuration is; when the first job finishes a delay of 10 minutes will be incurred then the second job will run, then another 10 minute delay before the third job runs. After these 3 jobs are complete an activation job needs to run. This activation job began to fail because the first 3 jobs were not finished. For now, the activation job has been moved but we need to understand why these are running longer and fix it. We may be experiencing a problem with database performance in PDF but I would not think it would take that much longer.
This is the BW sales load issue
The info-package group is schedule @ 00:05 am and it contains 3 info-packages: VAITM, V_ITM and VDITM with 10 minutes execution gap.
The first VAITM started 00:05:46 and ended it up in BW at 00:09:02.
Then we have 10 minutes delayed between jobs.
V_ITM started 00:20:12 and for some reason it finished at 01:00:51. We can see communication between PDF and BWP took much longer than normal.
Then we have 10 minutes delayed between jobs
At 01:00:25 the activation job started and failed. It requires the info-packages to be in GREEN status but V_ITM finished @ 01:00:51.
It probably failed because V_ITM still had YELLOW status at the moment.
VDITM started 01:12:02 and finally finished it load at 02:09:16. A big communication delayed between system.
See below an example of the load on the 01/14/2007. It looks normal communication between systems
Could you please give solution for this.
Thanks
Vasu.

Hi,
For every job you define and at the same time, you can also define the priority
levels to each job, since, during your job execution might be your job queue is
full with some other background processings, so try setting up the priority levels
of the job.
cheers,
Pattan.

HT1338 Why is safarai loading certain web pages so slowly?

Why is safari loading certain web pages so slowly?

Emptied the Safari cache lately?
Press Command + Option + E then quit and relaunch Safari to test.
If that doesn't help, try this DNS.
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch Safari to test.

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

Safari loading issue

Similar Messages

Maybe you are looking for