Safari loads encrypted text instead of video
My iPhone was loading mp4 (i believe) video just perfectly fine for 2 months. You click on the link, and the video would open up just like youtube. However, Safari, about a week ago, started to just load pages and pages of encrypted text. Note: This is only for internet video.
Any ideas?
Settings>Safari>Plug-ins enabled
Similar Messages
-
Since installing Safari 7.1, all the text in YouTube videos (title, resolution, etc.) is all little font error boxes and therefore completely unreadable. Nothing else is having this problem, just the text that is in the embedded videos themselves.
Any suggestions?What I did (in this order) was, set YouTube to HTML 5, bring Flash up to date, fontrestore, clean font cache with Fusion, reboot.
So far it has now remained fixed for me. I have Mavericks and it is up to date.
by ‘fontrestore’ I mean
sudo fontrestore default
in terminal as described on http://apple.stackexchange.com/questions/113107/how-to-restore-default-fonts-on- mavericks
fontrestore removed some of my fonts from my System and Library, but I moved them all back in on the theory that I might want to add fonts, but was not looking to remove them.
I don’t know which of these steps solved the problem. All I know is what I did and what the result was for me. As always, use ‘sudo’ at your own risk. -
Safari 8 does not properly load and play any mp4 video
My Safari 8.0.3 on my OS X 10.10.2 does not actually load and play any MP4 video in-browser. All I see is the black loading bar.
I have not installed any video codecs on my OS X, nor have I tinkered with any QuickTime settings.Perhaps a third parrty Safari add on that was compatible with the prior version of Safari but not 5.1 that's preventing pages to render as they should.
Read here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues -
Snow Leopard brand new iMac, several user accounts: some Safari pages show AAAAAAAAAA instead of tex, but for only one of the users
Check out this thread. https://discussions.apple.com/message/11938010#11938010
-
Safari Mountain Lion text editing glitch
Has anyone else seen problems with the latest Safari on the latest Mountain Lion where text that is being edited causes flashing? I found a YouTube video that demonstrates the problem:
http://www.youtube.com/watch?v=aYkqXkJXod4
This is very similar to what I'm seeing on my early-2011 MBP running Mountain Lion. It's especially bad in Google Docs, but it seems to happen when editing text in lots of web apps. The creator of the video suggested turning off the Energy Saver setting "Automatic graphics switching." He said that fixes the problem but also drains the battery a lot faster. And I can attest to that. Just during the time I've been typing this message, my battery has gone from 58% to 54%. But I haven't seen any of the text editing glitch.
I never saw this in Lion, so I'm guessing it's a new bug introduced in Mountain Lion, or Safari, or in one of the video drivers used by the early-2011 MBP. So I'm wondering if anyone else has seen this, and if Apple is already aware of it, and if anyone has a better workaround.
Thanks,
Todd.
ps. Battery is now at 51%.This thread seems to be dealing in the area where I am having a problem. I can easily from Safari email the link to a page but if I choose in the mail side to have it as pdf it simply goes into mail and just sits there and keeps displaying the message loading in the mail message it opens.
If I do it from safari by going to the print menu and selecting from the PDF area of the print dialogue mail pdf it will open a mail message with the pdf showing as an attachment. Similar happens if I choose to send it as a web page. Does not seem to matter on either if I have it set to rich text or text in the mail same behaviour.
Any idea with what might be going on. thanks
Am using lated Mountain Lion 10.8.2 -
Just bought brand new new iMac. When browsing in Safari, sometimes the text suddenly gets super large. I'm doing nothing except reading the screen, tho I usually have my hand resting lightly on the mouse. I can get back to normal size by clicking "actual size" in View. But then it does it again a minute or two later. What gives? Something seems defective--but what?
From System Preferences, Mouse, Point & Click, Secondary click. Go to it hover over Secondary click and watch the short video sequence change it left right, left right, you will see exactly what is does. No I do not think your Mouse is defective, you simply need to take control of your Mouse finger.
-
Getting unformatted text after decryption of formatted encrypted text
The problem getting unformatted text after decryption of a formatted encrypted text.
Im using Bouncy Caslte for encrypting the mail message.its a well formatted text but
after decryption its unformmated?
What will be the problem? why im getting the decrypted text as unformatted?sorry im using Bouncy Castle for encryption
This is my code
try {
Security
.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
KeyStore ks = KeyStore.getInstance("PKCS12", "BC");
ks.load(new FileInputStream("C:/rajesh/raj_gmail.cer"), "tomcat".toCharArray());
Enumeration e = ks.aliases();
String keyAlias = null;
String alias = null;
while (e.hasMoreElements()) {
alias = (String) e.nextElement();
if (ks.isKeyEntry(alias)) {
keyAlias = alias;
Certificate[] chain = ks.getCertificateChain(keyAlias);
// create the generator for creating an smime/encrypted message
SMIMEEnvelopedGenerator gen = new SMIMEEnvelopedGenerator();
gen.addKeyTransRecipient((X509Certificate) chain[0]);
Properties props = System.getProperties();
try {
InputStream path = getServlet()
.getServletContext()
.getResourceAsStream(
"/WEB-INF/classes/com/ips/ApplicationResources.properties");
props.load(path);
} catch (Exception e1) {
System.out.println("Not able to load the properties file");
props.put("mail.smtp.host", props.getProperty("mail.smtp.host"));
Session session = Session.getDefaultInstance(props, null);
MimeMessage msg = new MimeMessage(session);
String body_heading = props
.getProperty("mail.request.message.body");
body_heading = body_heading.replaceAll("[{]{1}[0]{1}[}]{1}",
Integer.toString(forms));
msg.addRecipient(Message.RecipientType.TO, new InternetAddress(
props.getProperty("mail.to.address")));
msg.setSubject(props.getProperty("mail.request.message.subject"));
StringBuffer body = new StringBuffer();
body.append(body_heading);
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.line1"));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.contact"));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.line2"));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.message.title")
+ props.getProperty("mail.colon")
+ String.format("%15s", title));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.message.fname")
+ props.getProperty("mail.colon")
+ String.format("%17s", firstname));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.message.lname")
+ props.getProperty("mail.colon")
+ String.format("%17s", lastname));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.message.address1")
+ props.getProperty("mail.colon")
+ String.format("%19s", address1));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.tab")
+ props.getProperty("mail.colon")
+ String.format("%20s", address2));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.tab")
+ props.getProperty("mail.colon")
+ String.format("%20s", town));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.tab")
+ props.getProperty("mail.colon")
+ String.format("%20s", county));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.message.pcode")
+ props.getProperty("mail.colon")
+ String.format("%11s", postcode));
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.message.email")
+ props.getProperty("mail.colon")/*
* +String.format("%33s",email
body.append(props.getProperty("mail.linebreak")
+ props.getProperty("mail.message.thanks"));
MimeBodyPart bp1 = new MimeBodyPart();
bp1.setText(body.toString());
bp1 = gen.generate(bp1, SMIMEEnvelopedGenerator.RC2_CBC, "BC");
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(bp1);
msg.setContent(multipart);
msg.saveChanges();
Transport.send(msg);
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
}if i print the original text im getting the content in my mail as
Please send me 1 application form pack(s)
Contact Details
Title: Mr
First name: rchanged
Last name: rchanged
Address: rchanged
: rchanged
: r
: r
Postcode: r4 4rr
Email:
Thank You
if encrypted is send
Please send me 1 application form pack(s) ------------------------------------------------------ Contact Details ------------------------------------------------------ Title: Mr First name: rchanged Last name: rchanged Address: rchanged : rchanged : r : r Postcode: r4 4rr Email: Thank You -
i m having a problem in safari loading problem,i.e it is not loading properly for the last 5 days .only text is shown but no images. i.e. websites are not displaying in proper order.i have checked the display images option in safari preferences and also change the user agent via Develop option but all in vain.
help me guys thanksHi,
Empty your Safari cache either from the Safari menu bar or Command + Option E
See if that helps.
Carolyn
Message was edited by: Carolyn Samit -
HELP - grayed text in tab "Videos" on 5g's "Ipod Option"
O.K.: so I'm on Windows. I plug in my iPod and it loads in iTunes. Whenever I try to drag and drop a video into my iPod on the left-side icon, it says (basically) "some of the videos cannot be transferred because this iPod cannot play videos". and when I right-click on the iPod and press "iPod Options" and click on the tab "Videos", all of the text is grayed out. And yes, this is a 5th generation, and when I'm using my iPod, there's a "videos" menu. What should I do?
I have (at least I think I have) converted the videos to workable iPod formats.
The problem is that iTunes isn't recognizing that this is a video iPod. The text in the "Video" tab under "iPod Options..." should NOT be grayed out (I should be able to choose between "automatically update your videos" and "manually update your videos"). -
Safari locks up on Yahoo news videos
Safari locks up on Yahoo news videos. They work fine on Firefox. Safari doesn't actually crash. It simply becomes unresponsive and I have to force quit it. When I launch Safari again, no sites will load. If I quit Safari and start it again, this time it works. Any suggestions?
Quit Safari. If it won't quit in the usual way, select
▹ Force Quit...
from the menu bar, then select Safari from the list and press return.
Relaunch Safari by holding down the shift key and clicking its icon in the Dock. That will stop the bad page from reloading automatically. From the menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
to get rid of any cookies or other data left by the server. -
Safari loading problem pages ?
I have Safari loading and opening new pages in an additional tab, typically this is Mackeeper or some other advert..
All software updates are current on this IMac
Any help with solutions ??There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
com.something.daemon.plist
and
com.something.helper.plist
Here something is a variable word, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes the word is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
com.something.agent.plist
where the word something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
something
where something is the same word you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
Hi,
I use a MacBook (mid 2010) with 10.9.2 and Safari 7.0.3.
Safari load some pages very often very slow. Almost ever soundcloud.com will load very slow, sometimes also youtube.
Now I've Chrome installed and in chrome it works without problems.
I've already tryed to reset Safari, clean the cache, delete browserdata and -settings from flash and delete the Safari.plst. Also I've tryed the solution paths from apple (DNS). Nothing works.
No I've no idea anymore.
Do you have solution suggestions?1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; BI () { $PB\ :CFBundleIdentifier "$1"; }; LC () { $2 launchctl list | awk 'NR>1 && !/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}' | grep -Fv "$1"; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"and $((l-25)) more line(s)"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^EO]|x([^8]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/s/^.*://p' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=On; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; bi=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$' <<< "$sys" | while read i; do [[ -f "$i" ]] && BI "$i"; done`; o=`kextstat -kl | grep -Fv "$bi" | cut -c53- | cut -d\< -f1`; Pm "Kernel extensions"; li=`egrep 'Launch[AD].+\.plist$' <<< "$sys"`; jl=`while read f; do [[ -f $f ]] && $PB\ :Label $f; done <<< "$li"`$'\n'"$bi"; R && o=`LC "$jl" sudo`; Pm Daemons; o=`LC "$jl"`; Pm Agents; o=`for d in {/,}L*/Lau*; do M; done | grep -Fv "$li" | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; p=`lsbom -pfc /var/db/*/*.BSD.bom | sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`; [[ "$b" && "$l" && "$p" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do i="$d"/Info.plist; [[ -f "$i" ]] || continue; ID=$(BI "$i") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \; | awk '{print $3"\t"$1}' | grep -Fv "$p" | awk '{print $1}'`; Pm "Periodic scripts"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=On; Ps Firewall; o=`scutil --proxy | egrep 'Prox.+: [^0]'`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; [[ "$I" =~ [AW]i ]] && { o=`/S*/*/P*/*/*/*/*/airport -I | awk '/lR/{print $2}'`; o=$((o<=-87?o:0)); Ps RSSI; }; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Instead of video i get a picture of a gift box O_o'''
hi,everyone)
i have a problem with watching a video from different websites..instead of video window on the page, i get a small picture of a gift box..and that's it..u can't do anything with it.
can u do anything with it?????
please help T___THello and Welcome to Apple Discussions.
Many websites use Windows Media or Flash-based video on the web-sites. There are currently no plug-ins for Flash or WMV for Safari on the iPhone or iPod touch. This may change following the release of the Software Development Kit in February 2008.
Merry Christmas
mrtotes -
I Downloaded something onto my computer and now when I click onto safari yahoo pops up instead of top sites I know certain changes come along with downloading but if there is a way back to top sites and google as my search engine I need it!! I'm not one for change and I love the whole original display that the macs have to offer when you first get your mac so thats why I really want top sites back also it was great when your in and rush and so much easier!! Please HELP immediately this is urgent!!
Identify and remove adware
http://www.thesafemac.com/arg/
or use Adware Removal Tool.
http://www.thesafemac.com/art/ -
Cannot decrypt RSA encrypted text : due to : input too large for RSA cipher
Hi,
I am in a fix trying to decrypt this RSA encrypted String ... plzz help
I have the encrypted text as a String.
This is what I do to decrypt it using the Private key
- Determine the block size of the Cipher object
- Get the array of bytes from the String
- Find out how many block sized partitions I have in the array
- Encrypt the exact block sized partitions using update() method
- Ok, now its easy to find out how many bytes remain (using % operator)
- If the remaining bytes is 0 then simply call the 'doFinal()'
i.e. the one which returns an array of bytes and takes no args
- If the remaining bytes is not zero then call the
'doFinal(byte [] input, int offset, in inputLen)' method for the
bytes which actually remained
However, this doesnt work. This is making me go really crazy.
Can anyone point out whats wrong ? Plzz
Here is the (childish) code
Cipher rsaDecipher = null;
//The initialization stuff for rsaDecipher
//The rsaDecipher Cipher is using 256 bit keys
//I havent specified anything regarding padding
//And, I am using BouncyCastle
String encryptedString;
// read in the string from the network
// this string is encrypted using an RSA public key generated earlier
// I have to decrypt this string using the corresponding Private key
byte [] input = encryptedString.getBytes();
int blockSize = rsaDecipher.getBlockSize();
int outputSize = rsaDecipher.getOutputSize(blockSize);
byte [] output = new byte[outputSize];
int numBlockSizedPartitions = input.length / blockSize;
int numRemainingBytes = input.length % blockSize;
boolean hasRemainingBytes = false;
if (numRemainingBytes > 0)
hasRemainingBytes = true;
int offset = 0;
int inputLen = blockSize;
StringBuffer buf = new StringBuffer();
for (int i = 0; i < numBlockSizedPartitions; i++) {
output = rsaDecipher.update(input, offset, blockSize);
offset += blockSize;
buf.append(new String(output));
if (hasRemainingBytes) {
//This is excatly where I get the "input too large for RSA cipher"
//Which is suffixed with ArrayIndexOutofBounds
output = rsaDecipher.doFinal(input,offset,numRemainingBytes);
} else {
output = rsaDecipher.doFinal();
buf.append(new String(output));
//After having reached till here, will it be wrong if I assumed that I
//have the properly decrypted string ???Hi,
I am in a fix trying to decrypt this RSA encrypted
String ... plzz helpYou're already broken at this point.
Repeat after me: ciphertext CANNOT be safely represented as a String. Strings have internal structure - if you hand ciphertext to the new String(byte[]) constructor, it will eat your ciphertext and leave you with garbage. Said garbage will fail to decrypt in a variety of puzzling fashions.
If you want to transmit ciphertext as a String, you need to use something like Base64 to encode the raw bytes. Then, on the receiving side, you must Base64-DEcode back into bytes, and then decrypt the resulting byte[].
Second - using RSA as a general-purpose cipher is a bad idea. Don't do that. It's slow (on the order of 100x slower than the slowest symmetric cipher). It has a HUGE block size (governed by the keysize). And it's subject to attack if used as a stream-cipher (IIRC - I can no longer find the reference for that, so take it with a grain of salt...) Standard practice is to use RSA only to encrypt a generated key for some symmetric algorithm (like, say, AES), and use that key as a session-key.
At any rate - the code you posted is broken before you get to this line:byte [] input = encryptedString.getBytes();Go back to the encrypting and and make it stop treating your ciphertext as a String.
Grant
Maybe you are looking for
-
How do I select a song from my ITunes Library and apply to a picture folder for a slide show?
How do I selcet a song from my ITunes library and apply it to a picture folder for a slide show. I have a PC, not a Mac.
-
Problem with text positioning on webpages
Hello, I have difficulties tu put text exactly the same place on the different pages of my website. Could someone have a look and help me? www.transgenic-rabbit-models.com It concerns the "address" text box (botom left of each page). Once on IE or fi
-
I love my IPad.. I would like to know what I need to be able to watch videos or watch my favorite TV series!!! CHeers LInda
-
I have 3.8.0.1280 version of Adobe air installed and need to update.. When I update it gives me this error: an error occurred while installing Adobe Air... If I try to run it as an administrator ... nothing happens.. I am running Win 7 Pro... 16.0 GB
-
TS1424 I have purchased a iBook that has chapters missing. How do I get the whole book downloaded?
I paid for an iTunes book and several chapters are missing from the download. Is there a way to get the missing chapters?