Safari loads link on new page as well as the original page

I have noticed this since iOS6.01 came out.
Ok so,
Page 1:
I hold a link and click open in new page, It opens.
Page 2:
This is the new page, I close it. And safari automatically puts me back to page 1.
Page 1:
Move back to page one but opens link again on this page.
So every time I open a link, it opens on both the new page and the original page
Help! It's so annoying!!!

The self-refreshing of Safari web pages has been discussed her before and nobody know of any resolution except maybe switching browsers.
See:
http://discussions.apple.com/thread.jspa?messageID=11635287&#11635287

Similar Messages

Safari open link in new page

I like to open pages in a new page so I use this a lot.
When I then click on the previous page that was opened, sometimes the page just opens to where it was before, which is the way it should.
However, often when I click on that previous page the page opens by refreshing itself and does not go back to the point it was at previously.
Is there a trick to placing the finger at a certain point on the previous thumbnail page, or am I just expecting the behavior to work that way and it does not?

The self-refreshing of Safari web pages has been discussed her before and nobody know of any resolution except maybe switching browsers.
See:
http://discussions.apple.com/thread.jspa?messageID=11635287&#11635287

Safari won't open new pages from Google links

I'm a bit confused - I'm using Safari on my iMac and MacBook, both with OS 10.4.10, and want to open google links in new pages. This works fine on the MacBook, but not the iMac, even though I've checked the box "Open links from applications in a new window".
Do you think I need to reset Safari in some way?
Many thanks
Chris

...want to open google links in new pages. This works fine on the MacBook, but not the iMac, even though I've checked the box "Open links from applications in a new window".
That preference setting refers to opening links from other applications in a new window. For example, if you click on a link in a Word file displayed by Microsoft Word, or in an email displayed in the program Mail, the link will open in a new window in Safari.
To see the shortcuts for opening a link from a web page (e.g. Google) in a new window, go to Safari > Preferences, click on the Tabs section, and read the Command-key shortcuts listed at the bottom of the window. Exactly what those shortcuts are depends on your settings in the checkboxes above. (To see the difference, change some of the settings in the checkboxes and watch the shortcuts below change.)
I'm not sure what the difference is between the settings on your two Macs. I'd go over the preference settings to get an idea of why they're behaving differently.

IPhone Safari doesn't open links in new page

Under iPhone Safari Settings, I've got it set to Open Links In New Page, but when I click on links in Safari, that doesn't happen. When I set it to Open Links In Background, that doesn't happen either. Links open in the same page no matter what the setting.
Anyone know how this can be fixed? Thanks.
(iPhone 4S running IO5)

It depends on the website. Some websites have it set up to take you to a new tab, some do it in the same tab.

Safari opens links in new tabs, or in pre-existing tabs without giving me the option of opening the link in the same tab.

Safari opens links in new tabs, or in pre-existing tabs without giving me the option of opening the link in the same tab.
This has never happened before. Normally I would right-click and select open in new tab. How do I fix it? It's really frustrating.

Safari > Preferences > Tabs
"Open pages in tabs instead of windows:"
Click the box for drop down.
You have three choices, Never, Automatically and Always.
Pick your choice.

My ipad safari keeps opening unnecessary new pages

Usually when I click a link, such as Wikipedia, it would open the link on the same page so that I can go back and forth if I want to. Now If I click a link, it opens up on a new Page. This is really annoying when I already have nine pages up and the new page replace one of my old ones. Can somebody tell me how to fix this?

Hi
1. Settings
2. Safari
3. Dearch engine (I use Google)
4. Open Links - in new page or in background
Cheers

Want to show UIX Media Model link in new page using jdev1012

Hi, I hope you can help me.
I have a read only table in uix page
there's a Column of type ORDDOC
here is my code for this column:
<column>
<columnHeader>
<styledText text="${bindings.Doc.label}" styleClass="DefaultFont"/>
</columnHeader>
<contents>
<media
model="${ctrl:createMediaModel(uix.current.Doc,'AppModulLocal')}"
shortDesc="${uix.current.DocName == null ? 'Doc' : uix.current.DocName}"
styleClass="DefaultFont"/>
</contents>
</column>
So it works all fine, i get a link to this file, but if I click on this link it shows this file in the same window as my application.
And i want to get this link open in a new Window. Just like i could make it with link-tag (targetFrame property) and so I'm trying to find a solution to get the medie link in new page.
So, is there a possibility to geht this media link in new window ?
I hope somebody know this problem and can help me.
Thanks a lot
Sebastian
Message was edited by:
Sebastian_ME
Message was edited by:
Sebastian_ME

Hi, I hope you can help me.
I have a read only table in uix page
there's a Column of type ORDDOC
here is my code for this column:
<column>
<columnHeader>
<styledText text="${bindings.Doc.label}" styleClass="DefaultFont"/>
</columnHeader>
<contents>
<media
model="${ctrl:createMediaModel(uix.current.Doc,'AppModulLocal')}"
shortDesc="${uix.current.DocName == null ? 'Doc' : uix.current.DocName}"
styleClass="DefaultFont"/>
</contents>
</column>
So it works all fine, i get a link to this file, but if I click on this link it shows this file in the same window as my application.
And i want to get this link open in a new Window. Just like i could make it with link-tag (targetFrame property) and so I'm trying to find a solution to get the medie link in new page.
So, is there a possibility to geht this media link in new window ?
I hope somebody know this problem and can help me.
Thanks a lot
Sebastian
Message was edited by:
Sebastian_ME
Message was edited by:
Sebastian_ME

When I right-click a link to open in another tab, the new tab opens not in the original window but in the first firefox window of the session

when I right-click a link to open in another tab, the new tab opens not in the original window but in the first Firefox window of the session.
I deleted sessionstore.js from the profile and restarted Firefox but that did not help

Sounds like this bug:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=644729 bug 644729] - Popup window with all toolbars visible causes new tabs to open in another browser window
''(please do not comment in bug reports; you can vote instead)''

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

Use the backup you have of the old computer and restore that data to the new computer. Also and backups that you have made of your iTunes library (it has a method to back it up as well) can be copied back over to the new computer. If you attempt to sync the phone to the new computer without the data, it will delete that data from the phone. The iPhone is not designed as a storage/backup device and as such will not sync music from itself to a new computer.
If by chance you had not been backing up the computer and/or iTunes, you can google for some third party software, such as Touchcopy that will do some of what you are asking.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How do i get all my data and info from my old iphone onto my new one without access to the original itunes that i set my first iphone up on? my partners itunes keeps telling me that its going to replace all my apps and data with his stuff

how do i get all my data and info from my old iphone onto my new one without access to the original itunes that i set my first iphone up on? my partners itunes keeps telling me that its going to replace all my apps and data with his stuff

ok so i have my own i tunes library - how do i get all my old apps onto my new library?

I created my first movie using one long video (all photos) clip created in Keynote and imported to Imovie. I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original but retain the audio. Can I?

I created my first movie using one long video (a montage of photos) clip created in Keynote and imported to Imovie. I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original video, but retain the audio. Can I? And if so, how. I cant seem to
find the info anywhere in help.

I would suggest that you go to iMovie/Preferences and make sure that Advanced Tools are enabled.
Then, you can drag your new video clip on top of your old clip and a popup menu should appear. Choose REPLACE.

Can I create a new form response file if the original is missing

I distributed a form through acrobat.com. And now I cannot find the form_responses file (the form_distributed file is gone for that matter too). I do not want to send out a new form for people to fill out, as it would be too difficult logistically.
Is there some way to create a new response file - perhaps using the original form - that can download the data from Acrobat.com?.
Thanks,
Matthew

Creating a new file with the extension Filename_responses will not collect the previously distributed form data. If you have the original _responses file, try copying it back to the actual location. However, the information for the distributed forms are still saved in a file named "adhocWorkflow". The information inside this file determines the distributed form data and other workflows.

Safari open link in new tab problem

Safari opens links in same tab when it should open each link in a new tab.
In preferences, tabs, Open pages in tabs instead of windows: if I select, Always
When I browse, click on a link, the link opens in the page I am viewing and also a new tab.
If I select never
When I browse, click on a link, the page opens in the tab I am viewing and also a new tab (about 75% of the time).
If I select automatically, Safari will selectively open the link in the same page and a new tab at the same time, or sometimes just open a new tab.
What's up, Safari 6?
How can I fix this annoying behavior?

I pulled the plist to the trash, reset Safari, restarted. Everything seems to be working as it should. I'm guessing this was some sort of preference or cache corruption. If the weird behavior returns, I'll report back.

Problem in opening a link in new page

hi all can any one help iam getting problem while clicking on the link it is opening in same window i want to open the link in new window.if it is normal content we can give target but the link is coming in the mailcontent how can i recognize the link thank in advance

i got the solution for this. it is possible with javascript iam checking all the anchar tags in a page and i gave target is "_blank"
the script is
function externalLinks() {
if (!document.getElementsByTagName) return;
var anchors = document.getElementsByTagName("a");
for (var i=0; i<anchors.length; i++) {
var anchor = anchors;
if (anchor.getAttribute("href"))
anchor.target = "_blank";
start the function by <body onload=externalLinks() >

Safari loads link on new page as well as the original page

Similar Messages

Maybe you are looking for