Safari log in problems

For the past few days I cannot log into my accounts using safari on my iPad. When trying pinterest or blogger it just shoots me back to the original homepage prompting me to log in after I have already submitted my username/password. On amazon I can log in, but when I click on a product to view it and the page refreshes, I am logged out, this makes it impossible to buy anything. On Etsy I can only get to my account if I access it by clicking on a link I got in an email. Trying to log in directly through the website doesn't work at all. Interesting to note that I have no problems with any of my email accounts with gmail or yahoo. Also interesting to note that when I enter the incorrect password on sites like pinterest, it will tell me that it isn't correct. But again, entering the correct password doesn't log me in at all.  I have NEVER had problems like this since I have owned my iPad. Not sure what to do.
I have tried
Turning iPad off and on
Turning wifi off and on
Resetting network settings
Rebooting iPad by holding sleep and home buttons for 10 sec
Clearing cache and cookies
Also, I have an iPad 1 but not ios5. I have been hesitant to upgrade since I have heard so many problems ipad1 users have had with it. Right now, that seems like my only other option in hopes that helps.
Any suggestions would be greatly appreciated. Thank you.

Court.Mill wrote:
Thank you for your suggestions. Are those things apps? Sorry, I am not sure. I am also having problems updating my old or downloading new apps. When I try, I get a message that they will be available when I log Into the iTunes store on my computer. Again, never had a problem updating or downloading on my iPad until a few days ago when all my safari problems started too.
Yes they are apps available in the AppStore. Might be useful to investigate as a troubleshooting step, but with the additional information you have given, not sure that's the solution.

Similar Messages

  • Major log-in problems at the moment. Is XP to blam...

    There are quite a few threads on log-in problems at the moment and the Moderators have taken an interest e.g. https://community.bt.com/t5/Other-Broadband-Queries/Email-log-in-issues-for-over-a-week/m-p/1145486/...
    I've have asked here in several threads if BT has an issue with XP.
    At the moment I cannot log-in on my XP desktop. I've tried  IE8, Chrome & Firefox. I've not installed Safari - yet.
    The screen stays white and says 'connecting to BT' and stays like that for ages.
    Is anyone else having this problem. If so, are you on XP?

    Taffy078 wrote:
    There are quite a few threads on log-in problems at the moment and the Moderators have taken an interest e.g. https://community.bt.com/t5/Other-Broadband-Queries/Email-log-in-issues-for-over-a-week/m-p/1145486/...
    I've have asked here in several threads if BT has an issue with XP.
    At the moment I cannot log-in on my XP desktop. I've tried  IE8, Chrome & Firefox. I've not installed Safari - yet.
    The screen stays white and says 'connecting to BT' and stays like that for ages.
    Is anyone else having this problem. If so, are you on XP?
    BT websites have problems with IE8.  XP and Google Chrome do not have the same issues.  I notice that if you click on the email tab in the forum using Google chrome you need to login to your BT ID before logging in to your email.
    With IE8 when I use my standard link to the forum it does not display the blue bar with the email tab.
    Using XP you have the luxury of using Outlook Express to handle your emails. IMHO this is by far the best email client to use for HOME use.
    I would suggest you concentrate on why you are having problems with XP and Google Chrome  as the XP, IE8 and BT issues are unlikely to be fixed.

  • Firefox was working on my new iMac but then, after switching on recently, won't connect to the web – whereas Safari has no problem.

    ===
    Hi
    I bought an iMac a week ago and installed Firefox via Safari. It worked fine for a while but, after a recently switching on, it won't connect to the web whereas Safari has no problems.
    I've tried following the Firefox Help, looking into the iMac firewall, but still no luck.
    I've no idea whether related or not but yesterday I had a system glitch where the iMac stated no wi-fi was installed and only connected via a physical lead to my house router. Also, there was no sound output via Safari. However, after booting up today all seems well – apart from Firefox still not working. It loads the start page but can't access the web.
    I have Little Snitch running, and wonder if that's the culprit... but it's working fine with Safari, seemingly.
    (Finally, how do I stop a dialogue box appearing on start-up saying that "To open “X” you need a Java runtime. Would you like to install one now?)
    Any ideas anyone?
    Cheers
    Rob / Sheffield / UK
    ===

    On the wireless networks that your Mac has had trouble connecting to, do you know which Wireless Security type (WEP, WPA, or WPA2) is being used?
    If it is WEP, one of the problems is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.   In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa.   You may find the following Apple Support article helpful.

  • 3 year old iMac 24 running OS10.7.4.  After it has been on for a day or so, it stops going to sleep and becomes very slow.  This only happens when Safari is running. Quitting Safari solves the problem.  Has anyone else have the same problem?

    3 year old iMac 24 running OS 10.7.4.  After it has been on for a day or so, it stops going to sleep and becomes very slow.  This only happens when Safari is running. Quitting Safari solves the problem.  Has anyone else have the same problem?  Does not happen on MacBookpro only on iMac.

    Hello Albert, see how many of these you can answer...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • Safari load image problem with iMac Intel core

    I got my new iMac 20" Intel core and system updated everything. I found that Safari cannot load image in my web photo album ( http://fotop.net/nicknick ), all image became "?".
    I can load this page correctly with FireFox and Opera Browser. I also try the iMac 17" PowerPC in my office with the latest version Safari, it also load the album correctly. And I know this web is created and store in a Linux server, the web page coding not written or optimized to IE.
    I've try to reinstall the whole OS X, nothing else installed, the same problem occurred.
    Is it the problem on Intel core? or any setting I can do to overcome it?
    Hope the problem could be solve, I like to use Safari except this problem.
    iMac 20" Intel core   Mac OS X (10.4.5)  

    Well... no - except to ask if your intel imac is connected to the internet in exactly the same way as the ppc imac. If it is, then that's puzzling
    You're right, I'm puzzled by the imac.
    Intel imac is at my home, ppc imac is at my office;
    both using same ISP but different service plan,
    (home:) PPPoE, ADSL modem -> buffalo MIMO wireless router -> intel imac (both direct wire or wireless connect have same result)
    (office:) fixed-ip, ADSL modem -> firewall -> Linksys wireless router -> ppc imac (wireless)
    both network setting with manual assigned IP, gateway and same DNS
    Same result occurred when (1)open box new machine, (2)after updated system, (3)reinstall whole OS with preserve the old setting, (4)reinstall whole OS with erase the whole harddisk option, (5)updated system after the reinstallation.
    I firstly think may be some security setting in imac that blocked the images, but can't found out. I secondly think some html code at this web not work on Safari.
    May someone with same machine help to open this web to see if all intel imac get the same result?

  • Safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

    safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

    I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

  • New log rotation problem

    I have resolved some log rotation problem...I have set del log rtation by size...and now the first time the log rotate,but then the output continue to go on the lod with the extension .log001 and not on the configured file.
    why?

    no,it the server rotates the log only the first time but then it continues to write on the .log001.On the original file it continues to write some server exception.
    the server launch line in the scritp is the follow
    nohup "$JAVA_HOME/bin/java" ${JAVA_VM} ${JAVA_OPTIONS_NODE} ${JAVA_OPTIONS} \
    Dweblogic.Name=${SERVER_NAME} \
    Dweblogic.ProductionModeEnabled=${PRODUCTION_MODE} \
    Djava.security.policy="${WL_HOME}/server/lib/weblogic.policy" \
    Dweblogic.Stdout=/u02/bea/weblogic81/mydomain/mydomain_LOG/myserver_Admin.log \
    Dweblogic.Stderr=/u02/bea/weblogic81/mydomain/mydomain_LOG/myserver_Admin.log \
    weblogic.Server > /dev/null &
    and the config.xml part for the server configuration is the follow
    <Server COMEnabled="true" CompleteMessageTimeout="0"
    ConsoleInputEnabled="false" EnabledForDomainLog="true"
    ExpectedToRun="false" JDBCLogFileName="./mydomain_LOG/jdbc.log"
    JDBCLoggingEnabled="true" JavaCompiler="javac"
    ListenAddress="10.2.1.16" ListenPort="10001"
    MaxMessageSize="100000000" Name="myserver_Admin"
    ServerVersion="8.1.3.0" SocketReaderTimeoutMaxMillis="10"
    StagingMode="nostage" StdoutDebugEnabled="true"
    StdoutEnabled="true" StdoutSeverityLevel="16" TransactionLogFilePrefix="../myserver_LOG/myserverAdminTransaction.log">
    <SSL Enabled="false" IdentityAndTrustLocations="KeyStores"
    ListenPort="10002" Name="myserver_Admin"/>
    <Log FileCount="4" FileMinSize="30"
    FileName="/u02/bea/weblogic81/mydomain/mydomain_LOG/myserver_Admin.log"
    FileTimeSpan="1" Name="myserver_Admin"
    NumberOfFilesLimited="true" RotationType="bySize"/>
    <WebServer LogFileCount="2" LogFileLimitEnabled="true"
    LogFileName="./mydomain_LOG/access.log"
    LogRotationPeriodMins="360" LogRotationType="size"
    MaxLogFileSizeKBytes="20000" Name="myserver_Admin"/>

  • Why does Safari have a problem loading images on some websites?

    Safari has a problem loading pages properly or images on certain websites. Apple.com is one of the websites. On my way in here this time it didnt load any images on the front page. I emptied my cache and reloaded the page but that didnt help. Clicked on a broken image that took me to the proper page but without any images. Clicked on a different broken image on to the page and the images load no problem. Click back to the home page images load problem. Clicked on in to support forums and posted this topic.
    Any ideas... it has done this for awhile. Everything is enabled in web content(preferences) Always accept cookies is selected.
    Thanks

    Hi all,
    I occasionally see messages telling me that my software won't let me see the HTML version of an email, but it's there on the page when I open it. This happens mostly with emails from Apple, but have also had a similar message from a few of the photography mags that I subscribe to.
    For my part, I just ignore it. It won't go away, but I just don't let it bother me.

  • Log in problems-please help!

    Hi everybody!
    I repost my log in problems with some uppdate info, it may help someone to come up with a solution....I am no computer expert, so please excuse my way of describing this problem.
    I switched my Mac off manually after having been frozen from the sleep mode.
    I have 2 accounts, one admin and one regular. I try to log into my admin, and I get the message "You are unable to log in to the user "my username" at this time".
    I restart the computer, same problem again. I can log in to my second account with no problem. I reinstall OS X, same problem again. I ran the disk utility from the installation CD, even changed the passwords and I am still gettig the same message. Neither can I log in when in safe mode.
    I would appreciate any suggestion, since my admin account contains valuable data and to reinstal/restore everything will be a pain..and probably impossible. Moreover, the data are encoded in the file vault and I cannot open them from my regular account, or can I? I have tried to open the sparseimage file in the admin user catalog, but I get "no mountable file systems".
    Is there any hope? Or should I return my Mac to Apple, in 3 days my one year guarantee expires....
    Thanks
    Evacha
    iMac G5   Mac OS X (10.4.6)  

    "no mountable file systems"
    Sorry to hear of your difficulties, but unfortunately, the above message suggests that your data is likely permanently lost.
    When data is stored in a disk image, damage to any portion of that image has the potential to render all of the files on the image inaccessible. Shutting off the power to the computer without "shutting down" normally increases the risk of damage to the directory in general, but if the image was actually mounted at the time, then damage could also occur to the directory in the disk image. Sometimes such errors may be repairable, but with "FileVault", the disk image is encrypted, reducing the chances of a successful recovery. It is unfortunate that nobody told you that maintaining up to date backups is essential when working with "FileVault" protected accounts.
    " the data are encoded in the file vault and I cannot open them from my regular account, or can I?"
    Normally, only the owner of the ".sparseimage" used in "Filevault" is able to access the image to attempt to open it - this is strictly a permissions issue and has nothing to do with encryption. If someone other than the owner attempts to open the disk image, the message is something like "Filesystem failed to mount... permissions denied". If the permissions are changed such that other users are allowed to use the ".sparseimage", the they would normally be prompted for the password and be allowed to mount the image. However, the "no mountable file systems" error indicates a problem with the image itself.
    It is not likely to succeed because I think the filesystem needs to be mounted for this to work, but there is no harm in trying to repair the disk image. Control-click on the "user.sparseimage" file and select "Get Info" from the contextual menu. Under ownership and permissions, change the "Owner" to the second user, or else give "Owner", "Group" and "Other" "Read & Write" access, then follow the instructions in this document:
    http://docs.info.apple.com/article.html?artnum=25695
    You could also try some of the strategies described in this hint, but again, the probability of success is low:
    http://www.macosxhints.com/article.php?story=20050326041757989
    I don't think you will be able to return your computer - check the documentation to make sure, but I think the "one year" only covers repairs if there is an actual physical defect - perhaps what is responsible for the original sleep problem. However, if you suspect you may have a lemon, you might want to consider buying two more years of AppleCare coverage as insurance, but I think it has to be activated before the original 1 year is up so you would have to hurry. But so far, I don't see any solid evidence of a defect - loss of the user data can be attributed to cutting the power without shutting down, which you said you have done more than once.

  • Safari logs me out of websites every day at midnight

    A few days ago I was browsing the internet and Safari randomly closed and asked me to "reset" so that it would work. I clicked reset and didn't lose my bookmarks and nothing seemed to be different. At midnight that night Safari logged me out of the websites that I had been logged into, and has done this every night at midnight ever since. Is there any way to fix this? I'd love to have it back like it was.
    Message was edited by: lisaserr

    Hi Sonny,
    Can you explain in a bit more detail the logging out?
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • Safari page load problems and 10.5.3

    Since I have upgraded to 10.5.3, I am experiencing Safari page load problems on all my user accounts on my 2.0 GHz Core Duo Black MacBook. I have reviewed threads in this forum and that of the Safari forum with no solution that solves the problem. so I post here in hopes of additional expert solution ideas.
    *The Problem:* Since upgrading to 10.5.3 Safari fails to complete page downloads for some, but not all websites. When these same websites are accessed with Firefox there is no problem. With Safari the page load will stop at about 75% completion, or the page will not load at all.
    Here is an example of a webpage that will not complete: http://www.realclearpolitics.com/
    Here is an example of a webpage that will not load at all: http://cherylsguitar.com/site (my wife's business)
    I also have a G4 iMac running 10.4.11 on the same WiFi network that does NOT experience the Safari page load problems. All is good and speedy on this trusty machine.
    *Solutions Attempted:*
    - Deleted plist (with no effect)
    - Re-installed Safari from Leopard disk (with no effect)
    - Scoured User Preferences in Library for offending applications, plug-ins, etc.
    - Reset PRAM
    - Reset and examined cable modem and router (AirPort Extreme 802.11g)
    *Hardware and Network info:*
    - 2.0 GHz Core Duo Black MacBook
    - 2 GB Ram
    - AirPort Extreme Base Station (generation 1) running 802.11g

    Allan Eckert wrote:
    Hi Perry Lehman;
    Have you cleared out your cookies?
    Allan
    Allan,
    Yes. I have reset Safari clearing all but website icons with no effect. I also tried turning of the Safari pop-up blocker with some very limited success. Disabling pop-up blocker will marginally help page load speed for some websites, but others still fail to load at all.
    Thanks for taking time to post.

  • Log on problem

    Hi to all, I've a log in problem. One year ago i Signed in in spotify with facebook account with my current email. About 6 months ago i deleted my facebook account permanently Now,i would create a new account from my email, and system says that email is already in use (when i was registered with facebook. account) So now i Signed in with an another email, but i would change this settings to my original email. What can I do?I cannot find the solution. Thanks.

    Hi @danicapacubas ,
    Welcome to the HP Forums!
    It is a great  place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that you are only able to log into a  temporary  account and cannot access your files.  Temporary accounts are intended for guests which is why you are unable to access your files.
    Have you tried logging in as administrator?
    What is your exact model of HP notebook.
    How Do I Find My Model Number or Product Number?
    What Operating System are you running?
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Safari and Java Problem

    Hi,
    I'm having a problem with the newest updates to Safari. This problem did not occur until late december when I installed several updates via Software Update.
    Problem:
    I use a photo uploader on a website from my company (unfortunately I can't give out the URL, as it is protected). But it is similar to many other photo uploader sites - load a Java applet, drag images files into a Java window, the files are added to a upload list and then uploaded.
    Now, if I drag 10 items into the window, only one or two will be added to the list. If I drag them in one at a time, all the images will be added. Previously it was possible to drag as many as one wanted in.
    Now the really irritating part : During the upload, the Java uploader completely hijacks Safari. The window the uploader allways stays active on top. If I open a new tab or window the uploader window will reappear on top and dominate the action. The only way to get anything done while I am uploading photos is to open another browser like Firefox. Safari is completely occupied with the Java program.
    Computer: MBP 2.16 GHz, 2GB RAM, OSX 10.4.11
    Safari 3.0.4
    Java 5.0 (not sure of the revision, but it is the most recent)
    Any help would be greatly appreciated.

    I had similar Java problems with Safari and Firefox. I downloaded Navigator and now can run any Java app I need. One thing that may or may not have had any impact: when installing Nav, it asked if I wanted to import settings from Safari or Firefox. I chose not to import any settings. Works perfectly.

  • Safari logs me out of logged in web pages - not the same problem as other similar post - please read.

    Before you crucify me please read the problem I've outlined below, because it's not the same issue other people are having. I did research the forums for the particular issue I'm having and it's not the same as what's already been posted. Please let me explain.
    Here is my machine info.
    iMac running Mac OS X Lion 10.7.5 on 2.5 GHZ Intel core.
    Safari Version 5.1.7
    I run two instances of Safari. I will have 1 safari browser window open on the left side of my screen with 7 tabs all on pages that require login. I run a second instance of Safari on the right side of my screen with only one tab open logged into 1 web page.
    Here's what happens. Ocassionaly when switching the focus from one browser to the other all of my logged in web pages will refresh and I'll be logged out of all my logged in web pages, on both open browsers. There's never a certain amount of time that this happens, I've had it happen 3-4 hours into my work day and I've had it happen 10 minutes into my work day. I've also had this occure when I'm putting the focus from one browser window to the other and then I go to resize the width of the window I just put the focus on.
    I'm thinking that there must be some setting or short cut "gesture" built into Safari that I'm triggering to make this happen, however I have looked at all the settings and can't seem to find anything that would cause this.
    Any help or advice is apprecaited.  

    BDAqua - I have two Safari windows open - I guess in my semi technical mind that equated to two instances. But your probably right, just one instance of app with two windows open.
    About two minutes after I posted my question, I was doing some work in one of my tabbed web pages, as I pressed the submit button to update the record on that page and as the page was refreshing I clicked my mouse on the second open Safari window to put the focus on that window, as soon as I put the focus on the second open browser I got logged out of all my logged in tabs in both windows.
    The time it happened was sometime between 14:30 and 14:35
    I'm looking at the Sytem Log. IN the filter I typed Safari and nothing came up from today in the log.
    Just looking at "All Messages" between the hours of 1430 and 1435 their are no messages about safari, just the following.
    1/10/13 2:32:22.000 PM kernel: IOSurface: buffer allocation size is zero
    1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero
    1/10/13 2:32:25.000 PM kernel: IOSurface: buffer allocation size is zero

  • Safari 3.2.1 and 4 log in problem - developer

    I am developing a web site using asp.net and since the update to safari 4 (and 3.2.1 and 10.5.6 on a mac) i am unable to log into the site, it doesnt appear to be saving the cookies, so it just redirects you back to the log in site every time.
    I am using formsauthentication, and configuring cookies using Response.Cookies("Admin")("username") etc..
    Has anyone else had the same problem? When i click the log in button (on default.aspx, it simply redirects me back to the same page, with the url
    default.aspx?ReturnUrl=%2fAdmin%2fdefault.aspx
    it should redirect to a folder called admin, which has a page called default.aspx.
    This works fine on IE/FireFox and versions of Safari on the mac and windows before 4.
    Does anyone have any idea how i can fix this, and regain normal log in ability.

    hehe... he's trying to help you. He said "Debug menu and User Agent?".
    This will show you what Safari is doing. Unfortunately you have not provided enough information for us to troubleshoot this problem.
    This is a common problem; web developers do not understand how browsers work, so they do not have the expertise to develop for "BrowserX".
    Try the Apple Developer's Connection if you are programming a website for Safari. This forum is primarily for end-users of the Safari browser. The response we usually give is to "Check with the web developer to be sure that Safari is a supported browser".

Maybe you are looking for

  • Trying to retrieve data from a dead computer.

    The computer is a 1.25Ghz PowerBook G4 (about 5 years old) running 10.3.9. The computer crashed and will not start. It reaches the apple logo with the rotating meter, but will then sit there pretty much as long as I'm willing to wait (more than an ho

  • ECC 6.0 integration with Microsoft Dynamics CRM

    Hi All I am working on a ECC 6.0 integration with Microsoft Dynamics CRM. I need to send the customer master data, va01/va02, vl01n/vl02n/ vf01/vf02 to CRM system. One option I have is to send in the form of IDOC with TRFC - TCP/IP. But looks like th

  • No ac adapter for a week

    Left my ac charged at the Grand Canyon... They will ship to me. But in the meantime is there a way got me to charge my Yoga 11?? Really do not want to buy spare sc charge. **bleep** Yoga connection means all my other charged do not work. Suggestions?

  • Download data of f-53 & f-58

    Dear all, Can you let me know,how can we down load data after executing F-53 & F-58. In the download fiile ,we are looking for all the details like Vendor name,code,bank code,amount,etc do suggest

  • Mappingproblem

    Hi. I have a mapping using the INVOIC02 IDoc. I'm using data in the E1EDK03 segment to populate a field in the E1EDP02 segment. In the explenation I will just present the effected segment and fields. Source: <INVOIC02>      <IDOC BEGIN="">