Safari my favorite, but not supported at my frequent sites

Hi all,
I have both Safari and Firefox. I have found that Safari is not supported at certain sites that I frequent, so I have been trying for about two weeks to switch to Firefox. But I like Safari better. I like how my bookmarks are organized better, I like how I can look back in my History on a certain day, just lots of things better in Safari.
Is there a way to make Firefox do some things differently, more like Safari? I tried to use the "user agent" under Develop in Safari, to pose as Firefox, but it won't stay on that selection. When I click to the next page, it goes back to "default".
Any comments, suggestions appreciated.

While it certainly appears possible to lock in Firefox as the default User Agent for Safari, it would require editing at least one file, which, if you don't know what you're doing, could disable your ability to use Safari at all.
Mulder

Similar Messages

Message you can't open safari because it is not supported on this type of Mac

Any help on the message on a Macbook pro with 10.9. Getting message you can't open safari because it is not supported on this type of Mac. and did a update.

Are you trying to launch the copy of Safari in the Applications folder? If so, select it and open the Info window. What is the Version? If you have any other copies of Safari, delete them.

Can't open Safari because it is not supported on this type of Mac

mac OS X mavericks was a sleep and now can not open Safari, gives message: You can't open the application Safari because it is not supported on this type of Mac. How can I get the Safari working again?

Restart the computer.
Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Best.

Website centers in safari 5.4 but not safari 5.9

Need Help!!
My website will center on Safari 5.4 but not in Safare 5.9
any help would be greatly appreciated!!!

What is the URL to a file that displays this behavior?
My guess is WMP file formats and Flip4Mac differences in the two machines.

Hello i have a problem with onfocus function on ipad. i am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

Hello i have a problem with onfocus function on ipad. I am trying to bring my cursor on a text box on a button click. It works fine with safari web browser but not on ipad. Need a solution.

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

Need to us CS2, but not supported on OS 10.8

I can't afford to upgrade to Adobe Creative Suite whatever and all I have CS2 on my computer. Just upgraded to 10.8, and apparently CS2 is not supported on 10.8. Is there anything I can do?

Raebob wrote:
I can't afford to upgrade to Adobe Creative Suite whatever and all I have CS2 on my computer. Just upgraded to 10.8, and apparently CS2 is not supported on 10.8. Is there anything I can do?
You got caught up in the minor miracle of what Apple calls Rosetta! Adobe CS2 was written back in the days when Macs used PowerPC CPUs. Apple decided to migrate all of their Macs to Intel CPUs in 2006, but did not want to make its existing user base have to purchase immediate software upgrades.
So they licensed technology which they implemented in OS X Tiger (and later Leopard and later still, optionally, in Snow Leopard) as Rosetta. This emulation software was so transparent that many users had no idea they were using it!
It was not until these users upgraded to Lion and/or Mt. Lion that they discovered that these flavors of OS X no longer include Rosetta (due, BTW, to Apple's expiration of its license to use the underlying technology from the release of OS X Lion and onward).
Rather than recriminate you for something you had little or no reason to expect, how about we find you a solution?
Install Snow Leopard (with Rosetta) into Parallels in Mt. Lion and continue to use your Adobe CS2:
[click on images to enlarge]
Full Snow Leopard installations instructions here
Note: Adobe now allows CS2 to be downloaded
[although I now note that Adobe has changed their download website to indicate that these products should now only be downloaded by existing customers. This limitation on the use of this serial number did not exist when I downloaded the copies that I use]

ICloud web page says safari 6.0.2 "not supported"

Having updated Safari to 6.0.2 as advised, I've tried (repeatedly) to access iCloud. All I get is the message "your browser is not supported. To use iCloud we recommend updating to the latest version." That's been happening ever since updating to Mountain Lion 10.8.2 from Snow Leopard. Any ideas, please?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Invisible td in Safari and Chrome but not other browsers

Hi, I am currently building a homepage with php, mysql, javascript and ofc html.
At the top of my page I have a table with some graphics and a login/menu system. I have several pages in my project and the issue I have only presents itself on 2 of them, also the problem only occures in Safari and Chrome (and not in Explorer, Firefox or Opera). The code is more or less identical so I have a very hard time understanding what the problem could be, maybe someone here has an idea
Here is code from both one of the pages that does not work and from one that does work (coloring is a bit weird since it's both html and php):
http://pastebin.com/AQXZ4rGw
(prior to the code pasted there is some database-stuff but I think that should not affect it)
Best Regards /Oskar

I found out that if I add tons of nbsp; after for example "Add" I get background for as long as the string is, so I can basicly cover the entire width with nbsp; this is not a very pretty solution however.
Message was edited by: elunosk
Message was edited by: elunosk

Website use Java but not support Microsoft JVM

This website (www.esdlife.com.hk) only support Microsoft JVM but not Sun JAVA JVM, I can't logon into their service pages until I disable my Sun JVM or unless I use another computer it has Microsoft JVM installed. Those pages even don't let me use other web browser like Netscape except Internet Explorer. I am an amateur Java programmer and I have been studying Java for three years. I don't know if this is an issue to the future of Java Technology. This website supported by the Hong Kong government I believe. Could anyone response my question?
Thanks in advance!
Peter
[email protected]

What has probably happened is that the site you are talking about wrote thier page with Microsoft Java, which isn't really Java. They probably used some class, or number of classes, that is specific to the Microsoft VM. This is not a problem with Java, it is a problem with Microsoft makeing their Java uncompatible with Java.

What's causing this phatom space in Safari and Chrome but not FF

http://www.energyschool.com/CSES_Home/Resources.html
I'm not figuring it out.

Cyclosaurus (et al),
Thanks for the replies.
What I'm noticing is that when I'm inserting text in to the content body textbox (which is very large) the newline is pushing the text above it, upward, instead of the text expanding the textbox downward.
I'm appreciative of Wyodor's and OT's options but not feeling 'met' by them. Cyclosuarus comes closer to a fix I'm looking for but as I have encountered before, there seems to be some past issue(s) cropping up that don't allow for open sharing.
So I'm curious, would this javascript address mozilla and webkit rendering engines? I wouldn't have to post-edit the html I could just insert this into an HTML widget, yes?

Safari loads pages but not pictures

When I go on some pages they loads but not all of the pictures load. I have deleted all of my caches, and removed all website data but the problem still occurs.

Make sure yor flash are up to date http://www.adobe.com/software/flash/about/
and https://www.java.com/en/download/help/mac_java_update.xml

Upgrade MATSHITA UJ-845A, but not supported???

Hi. I recently installed MATSHITA UJ-845A though,
my laptop says "Disc burning is not supported"
would you kindly help me out?
Powerbook G4 Titanium 667MHz Combo Drive Mac OS X (10.3.9)

Optical drives can be sensitive to:
1. Media improperly stored. Use only jewel case stored media and not spindle. Some spindles can cause the bottom of various disks to scratch against the top of the ones beneath them.
2. Media that is written on or labeled. Use the jewelcase inserts to make sure you know what the disk has, and only take out one at a time.
3. Media burnt at the maximum speed of the drive. Use the next fastest speed to the top if available for that media.
4. For CDs, I recommend Verbatim, Imation, Kodak, and Sony. For DVDs I recommend you check http://www.videohelp.com/dvdmedia for the best rated media.
5. Use Apple menu -> About This Mac -> More Info -> Disc Burning to find out which media are supported for writing. Dual Layer if not specified as DL in that section is not supported. And + and - media are not supported uniformly across all burners.
Look at this article for uncommon media formats:
http://docs.info.apple.com/article.html?artnum=58641

Safari and Firefox will not download from a particular site

Greetings,
I own a Dual 1.42 GHz PowerPC G4 (FW800) with 2 MB L3 cache per processor and 1 GB DDR SDRAM with the Mac OS X Version 10.4.11
My Safari version is 4.1.2 (4533.18.5)
My Firefox version is 3.6.10
I want to access this site for the information that it contains:
http://www.gis.mt.gov/
Safari has never worked with this site.
Firefox has worked very well for the past 2 years.
Recently, very recently, both browsers do NOT work with this site. I called the state's technical support and was informed:
1) That it is a hit or miss possibility for Safari and Firefox to work properly with this site; and,
2) That the site is optimized to operate with Internet Explorer for Windows.
I am unable to find and to download a recent version of Internet Explorer for Mac. Microsoft ended support for this browser (version 5.2.3) on 12/31/2006. I did download this version and it did not work.
Open this site: http://www.gis.mt.gov/
Click on “Property Map” located in upper left area of the screen.
On new drop-down, click on the “OK” button
A new window should appear with a map of Montana, with outlines of its 56 counties. If this map does NOT appear; then, the problem is being shown.
If this map of counties does appear; then, GREAT.
On this new window and in lower right hand corner choose a city and click on the “Go” button. A new window with the city shown should appear. If this city does not appear; then, there is the problem.
In the past I have used the “Property Map” most of the time because it contains information most useful to me. I want to continue using this “Property Map” into the future. The problem is that my results with both Safari and Firefox is a blank window after completing the above steps.
Help ! ! What can I do different/change/modify?
Dave Arbenz
[email protected]

I called the state's technical support and was informed:
1) That it is a hit or miss possibility for Safari and Firefox to work properly with this site; and,
2) That the site is optimized to operate with Internet Explorer for Windows.
There is your answer. Many US Government sites are the same - they simply WILL NOT follow the necessary web standards to make them Apple and/or Safari compliant.
The only thing you can try is to go to Safari's Develop Menu and try using Internet Explorer as the User Agent.

You can't open the application safari because it is not supported on this type of mac

Hi,
I've been on Mavericks since I bought my MBP... as of today, I get the error message above. Only two things of note happened. One, I installed root certificates yesterday (been working fine, but haven't rebooted). Today, the MBP locked and needed a reboot -- when I restarted Safari gives this message.
Any ideas?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Javascript works on Safari for Windows but not on Safari for Mac (2.0.4)

One part of our mail's web-based interface is not working properly when I use Safari on Mac (2.0.4). However, it works on Safari for Windows and Firefox. I browsed through a lot of the forum entrees with java/javascript on the subject and it seems that java processing is a common problem. I have checked all the necessary settings suggested on the forums but it still does not work.
We tried using the new Safari on another machine and it works. However, I also see lots of forum entrees asking how to uninstall Safari 3!
I also have a window on the open-source SugarCRM not working properly on Safari 2.0.4. Any fix coming?

I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

Safari my favorite, but not supported at my frequent sites

Similar Messages

Maybe you are looking for