Safari not accessing login pages

Safari right now will not access any login page, citing "because it couldn’t establish a secure connection to the server". I had a harddrive fail recently and had installed a new one (120 GB replacing an 80 GB) and thus had to reinstall OS Tiger onto the new harddrive. At the same time, I upgraded my RAM by adding another 512 MB chip. I went through all the updates and everything seemed to be fine until I noticed Safari couldn't access any login page (gmail, netscape, apple ID, etc.). Before the failure, everything was working perfectly. Then the next time software updater ran, every time it tried to install something it would hang up before it finished. I have emptied the caches, the history, set cookies to always accept, reset safari, and removed the plist. Nothing has worked thus far and I am avoiding reinstalling Tiger.
I am using SBC DSL, and a friend had almost the same setup as me (except he has a G4 PowerPC with the mirrored doors) and he has no problem with it.
I know I can use Firefox and IE, but I hate those browsers and would like to use Safari. I also really would like to download the latest updates.
Other than that, I have not had any problems.
I would appreciate any help, thanks.

did this worked fantastic as a number of other applications have also freed up it had started with safari then software update, text edit, imovie etc i also have x509 certificates that i have put into the trash what are they and should i bin these as well

Similar Messages

Safari not opening .asp pages

safari not opening .asp pages
i am running safari 6.0.5

I can't test because I don't have a login, but you can try the following.
From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.

Why will safari not load web pages with the prefix "fhp"?

Why will safari not load web pages with the prefix "fhp"?

Because it doesn't recognise them as valid addresses - just as the error message says.
Firefox is similar : Firefox doesn't know how to open this address, because the protocol (fhp) isn't associated with any program.
Where are you seeing this problem ?.

Safari not accessable after last update 03-02-06

Safari not accessable after last update march 2nd 2006
icon with "no access" apeared in applications map.
How can this happen?
do I have to install a new version? where can i find a new full version on mac. download?
Has this been happening to you too?
thanks, Jack, woodpecker01
Powwerbook 667 titanium Mac OS X (10.3.9) 384mb Ram.

Sounds like a permissions issue.
- repair permissions using Disk Utilty
- re-install just safari 2.0 from Tiger disk1 http://docs.info.apple.com/article.html?artnum=301229
MUST FIRST REMOVE THE Safari.pkg file from: HD_1 > Library > Recipts folder > safari.pkg.

Safari not opening any page--blank page!!

Whatever the website address I type in Safari (including www.yahoo.com, www.cnn.com), Safari opens a blank page and does not display ANYTHING. Any idea why? Up to now it has worked well.
Thanks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Internal Server Error while accessing login page.

Hi,
We have recently upgraded our database from 9.2.0.8 to 11.2.0.3 on AIX 6.1 platform (EBS version 11.5.10.2). We are not able to get the login page and receiving Internal Server Error on the login page without any error messages.
On checking we have found following errors in mod_jserv.log:
[25/10/2013 05:53:42:935] (ERROR) ajp12: Servlet Error: java.lang.NoClassDefFoundError: oracle/apps/fnd/sso/SessionMgr: oracle/apps/fnd/sso/SessionMgr
[25/10/2013 05:53:42:935] (ERROR) an error returned handling request via protocol "ajpv12"
[25/10/2013 05:53:42:935] (INFO) balance: continuing to ibmapptest:16070
[25/10/2013 05:53:42:935] (ERROR) balance: 12386336 internal servlet error in server ibmapptest:16070
[25/10/2013 05:53:42:935] (ERROR) an error returned handling request via protocol "balance"
We tried clearing the cache directories and bounced Apache but that dint help.
Why would we be receving this error and how to resolve it?

OK, this is an all too common issue - the logs are insufficient so you may well have to try some extra debugging to properly understand the problem.
If you have Metalink access try this: NOTE.249669.1 How To Collect Apache and Jserv Debugging
Basically, you should do the following - and maybe upload the logs here if you want to. I assume you are on 11.5.10. If not, then amend as appropriate:
Enable de-bug for Apache and Jserv:
1. Shut down the oracle application server.
2. Backup or change the name of the following files:
IAS_ORACLE_HOME/Apache/Apache/logs/error_log
IAS_ORACLE_HOME/Apache/Apache/logs/error_log_pls
IAS_ORACLE_HOME/Apache/Apache/logs/access_log
IAS_ORACLE_HOME/Apache/Jserv/logs/mod_jserv.log and jserv.log
After making a copy of these files or after renaming them, please delete
them from these directories. This enables new log files to be created
when the applications server is restarted and will help you to focus on
the current problem.
3. Enable debug logging for Apache
Update IAS_ORACLE_HOME/Apache/Apache/conf/httpd.conf to set the LogLevel parameter:
LogLevel debug
4. Enable debug logging for Jserv and mod_jserv
a) Update iAS_ORACLE_HOME/Apache/Jserv/etc/jserv.conf to set ApJServLogLevel parameter to:
ApJServLogLevel debug (from warn)
b) Update iAS_ORACLE_HOME/Apache/Jserv/etc/jserv.properties to set the
log=true
log.channel.info=true
5. Enable debugging in ssp_init.txt
Update iAS_ORACLE_HOME/Apache/Jserv/etc/ssp_init.txt to add Debug:
DebugLevel=5
DebugSwitch=ON
6. Please re-start the application server
7. Reproduce the problem
8. Upload the following files:
IAS_ORACLE_HOME/Apache/Apache/conf/apps.conf and httpd.conf
IAS_ORACLE_HOME/Apache/Apache/logs/error_log_pls
IAS_ORACLE_HOME/Apache/Apache/logs/error_log and access_log
IAS_ORACLE_HOME/Apache/Jserv/logs/mod_jserv.log and jserv.log
IAS_ORACLE_HOME/Apache/Jserv/logs/jvm (all files in this directory)
DA

Can't access login page in IE

Hi,
Some of my participants/customers, from the same
organization, can’t access the login page when they are going
to participate in a meeting. They can access the login screen for
Connect Pro Central but not for the meeting. For example the can
access
http://wezupport.emea.acrobat.com
but not
http://wezupport.emea.acrobat.com/support.
They just get a message that the site cannot be displayed. This
happens with Internet Explorer (6.0) but not with Firefox.
Has anyone experience this problem?
Dan

Björn, I too log in from Sweden and have the same issue: open the forums' page, log in and I am sent automatically to the "sorry, this page is not available" alternatively I get an error 404. As soon as I am sent to the "sorry, this page is not available" I too get automatically loggen in, but if I go back to the forums page (doesn't matter how, if I refresh, go back or open in a new window), I am not inlogged and the process continues.
I have to go through that at least 3 times before this jumping to and fro ends and the forum recognizes me.

Ipad states too many redirects and will not access web page

I am trying to access a webpage used previously on my IPAD; recently updated software IOS7 this week and now says" can not access page too many redirects", what do I need to do for correction?

Safari 6
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Remove website data.
Safari > Preferences > Privacy > "Remove All Website Data".
http://support.apple.com/kb/TS3320

Cannot access login page and no wireless signal

Hello, I am using a WRT54G ver 2 router, everything was working fine until a couple of days, when just out of the blue my wifi stopped working, the wireless light does not lit on the router, I tried resetting, disconnecting the router and modem, and upgrading the firmware(which I cannot because I cannot access the setup page) and nothing seems to work, hopefully someone here can help me,
Thank you
JB

After a firmware upgrade you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt, or your firewall is still turned on. In this case, turn off the firewall, and if you still cannot complete step 10, then use the Linksys tftp.exe program to try to reload your router with the latest firmware. (If you have already reloaded the firmware with tftp.exe, and you still cannot complete step 10, then the router is dead.) After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 03-26-2008 02:10 AM

ASA Clientless SSL VPN can't access login pages on websites

When I'm doing a clientless SSL VPN to my ASA and using the ASA to browse websites, I can pretty much go on to just about any website except specificly login websites. I can go on google and yahoo but when I click the "mail" button it just gives me an error message "Connection Failed - Server (site name) unavailable. When I go onto hotmail.com, it says server hotmail.com unavailable. When I browse by entering hotmail's IP address in, it says "Bad Request." Same happens on ebay, youtube, etc. Funny thing is, the ONLY login page I can get onto is Cisco's website's login page. I tried changing DNS servers, nothing changed. Here is my configuration:
show run
: Saved
ASA Version 8.4(4)1
hostname PatG
domain-name resolver4.opendns.com
enable password aDvdtQE/ih5t061i encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa844-1-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group Comcast
name-server 75.75.75.75
domain-name cdns01.comcast.net
dns server-group DefaultDNS
name-server 208.67.220.222
name-server 208.67.220.220
domain-name resolver4.opendns.com
object network obj_any
subnet 0.0.0.0 0.0.0.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-649-103.bin
no asdm history enable
arp timeout 14400
object network obj_any
nat (inside,outside) dynamic interface
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Remote1 protocol radius
aaa-server Remote1 (inside) host 192.168.1.8
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console Remote1
aaa authentication http console Remote1 LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd domain redtube.com
dhcpd auto_config outside
dhcpd option 150 ip 192.168.1.15 192.168.1.5
dhcpd address 192.168.1.5-192.168.1.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
tunnel-group-list enable
group-policy Eng internal
group-policy Eng attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value EngineerMarks
group-policy RemoteHTTP internal
group-policy RemoteHTTP attributes
vpn-tunnel-protocol ssl-clientless
webvpn
url-list value Test
customization value Extra
username user1 password mbO2jYs13AXlIAGa encrypted privilege 0
tunnel-group Browser type remote-access
tunnel-group Browser general-attributes
authentication-server-group Remote1
default-group-policy RemoteHTTP
tunnel-group TEST type remote-access
tunnel-group TEST general-attributes
authentication-server-group Remote1
default-group-policy RemoteHTTP
tunnel-group TEST webvpn-attributes
group-alias testing enable
group-url https://24.19.162.53/testing enable
tunnel-group Engineering type remote-access
tunnel-group Engineering general-attributes
authentication-server-group Remote1 LOCAL
default-group-policy Eng
tunnel-group Engineering webvpn-attributes
group-alias engineering enable
group-url https://209.165.200.2/engineering enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect http
policy-map map
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DD CEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
password encryption aes
Cryptochecksum:843e718c8d4b23b5f421f82fc0a0c255
: end
Can anyone please help me? Thanks

In your crypto ACLs for the site-to-site tunnels, add the ASA's public IP destined to the remote network, and mirror this ACL on the remote end VPN device.
Example:
ASA public IP: 2.2.2.2
Remote network: 192.168.1.0/24
access-list vpn_to_remote_network permit ip host 2.2.2.2 192.168.1.0 255.255.255.0
Mirror the above acl on the remote end router.
PS. If you found this post helpful, please rate it.

SSLVPN in IE 8 or 9 does not display login page

Hi all,
I have a working setup with a customer using UC560 that uses SSLVPN and it works but only when using other browsers like Firefox and google chrome, when we try using IE version 8 or 9 we get prompted about the security certificate (the usual, as it's https) and after making the exception it does not display the login page, just this: Internet Explorer can't display this website, and that's about it, don't even get the chance to login nor download the anyconnect client, anyone know if there's a patch or something for this?

Hi Bryan,
thanks for your response, unfortunately it's a UC560 not an SA500 so i don't have those options, so far I haven't found configuration options that deny IE or someting like that, it really is a weird problem and it's though to troubleshoot.
When I do debug webvpn http and try to enter the webpage with IE it shows this:
077696: Mar 26 19:35:09.841: WV-HTTP: Fragmented header-line
077697: Mar 26 19:35:09.841: WV-HTTP: HTTP request line too long
077698: Mar 26 19:35:09.841: WV-HTTP: Deallocating HTTP info
and when i do the same debug but enter the webpage using firefox or google chrome it succeeds, sending this debug output:
102796: Mar 27 18:37:02.411: WV-HTTP: Original client request
GET / HTTP/1.1
user agent is:Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Ge
102797: Mar 27 18:37:02.411: WV-HTTP: HTTP Header parsing complete
102798: Mar 27 18:37:02.411: WV-HTTP: * HTTP request complete
102799: Mar 27 18:37:02.431: WV-HTTP: Original client request
GET /webvpn.html HTTP/1.1
user agent is:Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Ge
102800: Mar 27 18:37:02.431: WV-HTTP: HTTP Header parsing complete
102801: Mar 27 18:37:02.431: WV-HTTP: * HTTP request complete
102802: Mar 27 18:37:02.515: WV-HTTP: Original client request
GET /paramdef.js HTTP/1.1
user agent is:Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Ge
102803: Mar 27 18:37:02.515: WV-HTTP: HTTP Header parsing complete
102804: Mar 27 18:37:02.515: WV-HTTP: * HTTP request complete
102805: Mar 27 18:37:02.523: WV-HTTP: Original client request
GET /lang.js HTTP/1.1
user agent is:Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Ge
102806: Mar 27 18:37:02.523: WV-HTTP: HTTP Header parsing complete
102807: Mar 27 18:37:02.523: WV-HTTP: * HTTP request complete
102808: Mar 27 18:37:02.547: WV-HTTP: Original client request
GET /shared.js HTTP/1.1
user agent is:Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Ge
102809: Mar 27 18:37:02.547: WV-HTTP: HTTP Header parsing complete
102810: Mar 27 18:37:02.547: WV-HTTP: * HTTP request complete
102811: Mar 27 18:37:02.671: WV-HTTP: Original client request
GET /img/logo.gif HTTP/1.1
user agent is:Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Ge
102812: Mar 27 18:37:02.671: WV-HTTP: HTTP Header parsing complete
102813: Mar 27 18:37:02.671: WV-HTTP: * HTTP request complete
102814: Mar 27 18:37:02.675: WV-HTTP: Original client request
GET /img/login_photo.jpg HTTP/1.1
user agent is:Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Ge
102815: Mar 27 18:37:02.675: WV-HTTP: HTTP Header parsing complete
102816: Mar 27 18:37:02.675: WV-HTTP: * HTTP request complete
102817: Mar 27 18:37:02.895: WV-HTTP: Original client request
GET /favicon.ico HTTP/1.1
user agent is:Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Ge
102818: Mar 27 18:37:02.899: WV-HTTP: HTTP Header parsing complete
102819: Mar 27 18:37:02.899: WV-HTTP: * HTTP request complete
102820: Mar 27 18:37:02.907: WV-HTTP: Original client request
GET /webvpn.html HTTP/1.1
user agent is:Mozilla/5.0 (Windows NT 6.1) AppleWebKit/535.11 (KHTML, like Ge
102821: Mar 27 18:37:02.907: WV-HTTP: HTTP Header parsing complete
102822: Mar 27 18:37:02.907: WV-HTTP: * HTTP request complete.
I wonder what difference do they have in the HTTP request line length, probably a browser problem, I'll keep looking into it like it's the browsers fault for now.

Safari not opening web page with 10.4 thru 10.6 either on wireless or direct connect Cat 5, any ideas?

Hello,
Have a 2006 MBP core duo that Safari seems to stall and not load web pages using wireless or CAT 5, have reloaded the OS starting with Tiger and have progressed thru Snow Leopard and still no luck, I-chat works no issues and have done all the updates both wireless and via CAT 5, any suggestions?

Try emptying the Safari cache more often. Command + Option + E
Quit and relaunch Safari to test.
If that didn't help, from your Safari menu bar click Safari > Preferences then select the Advanced tab.
Cllick Change Settings from the Proxies pop up menu. That will launch System Preferences for you.
Deselect any checked boxes on the left under Select a protocol to configure then click OK.
Quit and relaunch Safari to test.

Safari not loading web pages

My mom's Powerbook is no longer able to load web pages through Safari. Her email works, as does iChat, so it isn't her internet connection. Other users on the same network can load web pages, so it isn't the service provider. I have had her reset safari, as well as remove the preferences file, and the same thing happens (the 'loading' message appears but nothing ever loads).
Any suggestions what to try next?
Thanks!
Brian

HI Brian,
From the Safari Menu Bar, click Safari / Empty Cache.
If that doesn't help, go to ~/Library/Caches/com.apple.Safari/ Move the Cache.db file to the Trash
If that didn't help...
Go to ~/Library/Internet Plugins and /Library/Internet Plugins. If there are plugins in either of those folders, move them to a temporary location on the Desktop. With Safari open, from the Menu Bar, click Safari/Preferences and click the Security tab. Make sure Enable Plugins is selected. See if Safari can load web pages. If not, move those files back to the appropriate folder.
Go to /Library/Input Managers. Move any input managers from that folder to the Desktop and relaunch Safari.
Might be a web clip causing the problem. Open Dashboard and remove any web clips.
If she is running Tiger 10.4.11, open System Preferences/Software Updates - Installed Updat4es and make sure she has the 2009-002 Security update installed. If not, download and install it here.
http://support.apple.com/downloads/SecurityUpdate_2009_002__Tiger_PPC
If her PowerBookG4 has the original hard drive, 40 or 60GB?, it might be a lack of free disk space.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
Carolyn

Oracle Enterrize Manager is not showing login page?

Hi,
I am trying to open "http://XXX:5501/em"
Then it is directed to "http://tdm:5501/em/console/database/instance/repDown".
And it is showing two options , One is Startup and other one is Perform Recovery.
And it is showing the following info.
"The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
But the database is mounted. Eveny I am able to query database. But still it is not showing the login page.
Thank you,
Regards,
Gowtham Sen.

user8897426 wrote:
I have a w2008 server x64. I installed the 32 bit version of instant client. Yes we need the 32 bit version even though this is a x64 system. What version of Server 2008?
the instant client is not showing up in the ODBC manager. In the 32-bit ODBC admin tool, from \windows\SysWoW64?

Why is Safari not displaying some pages correctly?

Safari seems to be messing up again. Had this problem quite a while ago. It's not displaying some pages correctly.
Notice the 2 enclosed screen shots. I went to purchase something (no personal info in the jpgs)
Notice the W-Safari. Little trash cans by the purchase items missing as well as the submit button and a few other things. So I opened Chrome.
Notice in the W-Chrome, everything is displaying correctly.
I've had problems like this some time ago but I thought they were fixed.
Thanks for any suggestions or help.
Allen

Post a URL so what we can look at it.

Safari not accessing login pages

Similar Messages

Maybe you are looking for