Safari not connecting to internet after software update

I have just completed a software update and now safari will not connect to our wireless internet... airport says it has full bandwidth and other macs connected to the wireless connection are working without any fault.... has anyone got any ideas????
Thanks!!

Hello Sarah:
As you probably have already guessed, quite a number of things might have happened.
My network is Ethernet, so I am not much help with wireless networks. However, I think I would (if I were you), run an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
An archive and install will place a fresh copy of OS X on your system while, at the same time, preserve your files, programs, and settings. It is always a good idea, however, to have a good backup strategy before any software changes. You should then run software update to bring your system to a current level (in your case, OS X 10.4.11 is current, I think).
The A&I should eliminate any system software issues.
Barry

Similar Messages

  • HT4623 My iPad is not connecting to internet after software update what can i do

    Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
    what to do to correct this issue? Please 

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.
    If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

  • Cannot connect to internet after software update

    I have an old powerbook G4 running Mac OS X 10.3.9 (this is one of 3 macs) I also have an airport Extreme and an airport Express to make a network in my home. Frequently, after a software update to the old computer, it has trouble getting back on to the internet. Usually, adjusting access to the Keychain fixes this.
    Now, after a software update last week--I cannot get on the internet with this computer at all. The computer is connected to the network, the password is in the keychain, the signal is strong (all of the other computers can get on to the network)--but whenever I try to get on, I get 'cannot connect to the server'.
    (btw, Last evening, the issue resolved itself for about 3 hours--I don't know why--but today it is out again.) Can anyone help?

    Hi, Rathh. Always use Disk Utility to repair permissions immediately after installing any software update that uses Apple's Installer application, or that is installed by the Software Update function accessed through the Apple Menu.

  • Connection to Internet After Software Update

    I updated my mac computer with a software update today, I restarted it, and now it will not connect to the internet or check for more updates.  Please help!

    Click the Wifi logo at the top of the screen and forget network and start again.

  • Can't connect to internet after software update to iBook G4

    I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?

    I am experiencing the exact same problem with my sister's laptop. iBook G4 10.3.9 I just installed Security update 2007-008 and quicktime update. After the reboot her airport connected to the house router, but will not acquire an IP address. The other computers in the house have remained connected to the router without change. I have a another iBook G4 running on 10.4.11 with the same network settings and I have no trouble whatsoever. I re-enetered the WAP password, reorganized the network connection priorities and repaired permissions, but cannot get the computer to acquire an IP address.
    Any ideas??

  • Can't connect to internet after software update

    I just downloaded todays (3-1-2006) security update from apple. Once I rebooted my ibook I wasn't able to connect to the internet anymore. Any ideas why?
    My internet connect is still good as I am typing this on my wifes ibook just fine.
    thanks

    Mike,
    Check my post on the "Customization" thread in reply to "Onthegomike." I experienced a similar problem with my desktop and was able to resolve it. I have not yet downloaded the Security Update to my laptop; however, I'm sure I'll have to go through hoops again once I do that. Repairing permissions before and after sometimes helps, however, I often have to go through the disconnection of my airport express before I'm up and running on the iBook.
    eMac, iBook   Mac OS X (10.3.9)   1 Ghz G4, 768 mb ram

  • Can't connect to internet after software updates to ibook g4

    I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?

    You might have better luck posting in the OS X forum. This forum is for the iPhone.

  • IPhoto not connected to internet after latest update

    I just updated my iPhoto last night according to notification.  Then, everytime I change desktop, either to LR3 or CS5 and return, iPhoto is no longer connected to the internet therefore, I cannot upload to Facebook, Flicker or email from iPhoto.
    I have to close iPhoto, restart iPhoto, then its OK.  How silly.  It was never that silly before.
    What's happened?  Who made what change to the good code?  Is there a fix?

    As a test  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it? If it does then try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    Have you rebooted since this problem occurred?
    OT

  • HT5642 ipod won't connect to internet after software update

    Help. I can't get my ipod to connect to my wifi since I downloaded the new update.

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • IPad Air can not connect to internet after updating to iOS8.

    Safari CAN NOT OPEN ANY PAGES because the iPad is not connected to internet. I updated to iOS8 last night and have been trying to reset my ipad as well. However, the problem is still there. It even says my Apple ID incorrect. GUYS! DO NOT UPDATE YOUR iPAD TO iOS8 UNTIL FURTHER NOTICE!!!!!!!! Luckily, I did not do anything with my phone. PHEW

    Other threads I've read have had people note that the following solutions have worked for them:
    If you have a 5 GHz wi-fi router, turn off 5 GHz support and let it fall back to 2.4 GHz.
    Change wi-fi router to auto-select channels, or manually select a different channel than what it's on now.
    Disable iCloud Drive.
    I'm not saying that that any of these will work, but it's something to try (one at a time).

  • Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

    Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

    1st problem see http://kb.mozillazine.org/Firewalls
    2nd problem, to close Firefox properly use File > Exit
    :not with the [x] in upper right corner which close window
    :see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
    :if restarting use "Restartless Restart" extension as mentioned there.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • Cant connect to internet after ios6 update

    cant connect to internet after ios6 update

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Not connecting to internet after installing os x mavericks. and thus i cannot complete setup

    please help
    today i installed mavrericks update and now my mac is showing new setup window. but it is not connecting to internet and i cannot sign in to apple account. and it seems like i lost all my data.. please help me. if i lost my data i will be killed.i feel like the new os is not installled properly. is there any way to reinstall it. do i have to download the os x again. please help me. i am in deep problem

    Have you looked here:
    Re: osx Mavericks can't save scanned documents with hp scanjet

  • I cannot connect to internet after I update system.

    Hi,
    I update my system a few day ago (use systemd to replace rc.d) and I cannot connect internet. I guess my router table is broken, but I cannot find any problem.
    I use ping to try some IP. And I find I connect to local machine only.
    Do I miss some configuration ?
    [~]ping -c 3 8.8.8.8
    PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
    --- 8.8.8.8 ping statistics ---
    3 packets transmitted, 0 received, 100% packet loss, time 2000ms
    [~]$ route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         172.27.13.254   0.0.0.0         UG    204    0        0 eth2
    10.10.12.0      0.0.0.0         255.255.255.0   U     0      0        0 eth1
    172.27.12.0     0.0.0.0         255.255.254.0   U     204    0        0 eth2
    [ ~]$ ping 172.27.13.254
    PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
    --- 172.27.13.254 ping statistics ---
    2 packets transmitted, 0 received, 100% packet loss, time 999ms
    [ ~]$ route -n
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         172.27.13.254   0.0.0.0         UG    204    0        0 eth2
    10.10.12.0      0.0.0.0         255.255.255.0   U     0      0        0 eth1
    172.27.12.0     0.0.0.0         255.255.254.0   U     204    0        0 eth2
    [~]$ ping 172.27.13.254
    PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
    --- 172.27.13.254 ping statistics ---
    2 packets transmitted, 0 received, 100% packet loss, time 999ms
    --- 172.27.13.254 ping statistics ---
    41 packets transmitted, 0 received, 100% packet loss, time 40131ms

    Hi,
    I have 2 network interface.
    The eth1 is for test only. It is connected to a 8 port LAN switch, and there are 2 NAS connected to this switch.
    I use eth2 to connect to internet, for example, update system. I try to disable eth1, but it is still not work.
    ip addr
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
    inet 10.10.12.50/24 brd 10.10.12.255 scope global eth1
    inet6 fe80::2e0:81ff:fe27:3261/64 scope link
    valid_lft forever preferred_lft forever
    4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
    inet 172.27.12.23/23 brd 172.27.13.255 scope global eth2
    inet6 fe80::207:e9ff:fe01:a136/64 scope link
    valid_lft forever preferred_lft forever
    ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
    link/ether 00:e0:81:27:32:60 brd ff:ff:ff:ff:ff:ff
    3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
    4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
    link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
    Last edited by guardkuo (2012-12-22 10:52:35)

  • Safari and iTunes not connecting to internet after 10.5.3 but firefox does

    Hi,
    My first post ever. I just updated to 10.5.3 from 10.5.2 After the update, I can not connect to the internet using Safari. I get an error message that I have no internet conection. I ran the network diagnostics and everything was reported as working correctly. I also ran a repair permissions from disc utilities. Still can not connect with Safari. I also noticed that itunes can not download any podcasts. My "software update" in system perferences can not connect either. Firefox has no problem going online.
    Any suggesttions on how to proceed?
    Thanks

    Also worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
    JC

Maybe you are looking for

  • Creative Mediasource Not Work

    I have Creative Mediasource 2.x which came with my Soundblaster audio card. It was working fine until I tried to update it over Creatives automatic update. While?it still plays music, it has lost access to all of it's add ons:? graphic equalizer, EAX

  • How do you get the video out to TV to work on the iPhone 3GS

    I cannot get the video out to TV to work on my iPhone 3GS with iOS 5.1.1. I am using the $40.00 apple composite AV cables and nothing seems to work. With the cables connected to tv input nothing shows up in general settings for video out. Or anywhere

  • FaceTime with a large amount of connections

    Just found out when u FaceTime with someone Then the browsing speed on other devices go extramly slow, and I checked the conection in my router setting, my 4s just hold 130+ conections when FaceTime is on and 30+ when it's off. Which makes the bandwi

  • HeLP! My ipod keeps resetting

    hey guys. i have a 4th generation 20 gb ipod. i been trying to format it for windows but had great diffuculty. now it just keeps reseting. i tRIED almost everything. some 1 please help

  • Importing excel documents into Numbers problem

    When I try to open .xls files in Numbers, I often get the message that the file is to large to translate. Is there a solution to this? I don't want to buy Microsoft Office! Message was edited by: downtoearth