Safari not refreshing webpages that fail to load.

I have a problem with Safari. When loading multiple tabbed pages, sometime the pages do not load and I get a server not found message. No problem I think, happens often when loading so many, I'll just use command-R and refresh the page. Problem is when I do that the page won't refresh, no matter how many times I command-R. Anybody got any solutions, or is this just a bug that will have to be fixed in the next update? BTW Didn't have this problem using Safari 3 on my Powerbook G4 1.25 MAC OS 10.4.11. Firefox has the problem too, but not as bad.

Similar Messages

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

Plug-ins that failed to load: 3-D NO VERSION

After installing PS CS5X on my new Win 7-64 system, I get this message when I open PS64bit:
Plug-ins that failed to load:
3-D NO VERSION - - from the file “3-D.8bf”
I haven't tried anything in the 3-D arena in PS-64bit yet.
I can't find any reference to this in searching.
Appreciate any suggestions to resolve.
Thanks,
RON C

Hi Ron,
I'm pretty sure this is a third party plug-in that is not 64-bit compatible. Did you copy any old plug-ins to your CS5 install, or point the Alternate plug-ins pref. to a directory of plug-ins? Try launching the 32-bit version of Ps and then go to Help> About Plug-In to see what third party plaug-ins are there.
regards,
steve

Plug-ins that failed to load   NO VERSION

I am trying to release a 64bit version of Windows plugin.
I get the following issue when Photoshop CS4 64bit starts.
Plug-ins that failed to load:
   Correct NO VERSION - - from the file “PTFilters.8BF”
   Extract NO VERSION - - from the file “PTFilters.8BF”
   Insert NO VERSION - - from the file “PTFilters.8BF”
   Perspect NO VERSION - - from the file “PTFilters.8BF”
   Remap NO VERSION - - from the file “PTFilters.8BF”Flash:
   Connections
   Kuler
The 32bit version loads fine. In a single file I have 5 plugins. Each with its own entry point and PiPl and aete resource.
Are there other chagnes to the resource file besides the following needed?
            #if defined(_WIN64)
                CodeWin64X86 { "PluginMainCorrect" },
            #else
                CodeWin32X86 { "PluginMainCorrect" },
            #endif
On the 32bit version if I choose Help | About Plugin ... on any one of them I get 5 request to display an about box. Is there something I can do to prevent this besides creating 5 seperate files?
Jim

The reason for the plugins failing to load on 64bit was I forgot add a Preprocessor define of _WIN64
Still getting 5 request to dispay the about box . Is this a PS bug?
Jim

HT201412 My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Satellite A305D-S6848 does not start up - Windows failed to load

SCREEN SAYS "Windows failed to load because a required file is missing, or corrupt.."
file: ntoskrnl.exe
status: 0xc0000098
I DO NOT HAVE AN INSTALL DISK AND DONT KNOW HOW TO GET SYSTEM BACK UP AND RUNNING??
CAN SOMBODY PLEASE HELP ME ???

Hi
It seems to be a Toshiba US notebook series and therefore the recovery process might be different as on Toshiba European notebooks
However, the recovery procedure should be mention in user manual. Check this
Try firstly this:
Power up the unit and press F8.
Then choose Safe Mode and try to boot the Windows in safe mode.
If it does not work, try Repair the Computer option.
I think the notebook should be equipped with HDD recovery. This means that you could recover the unit without the usage of the recovery disk.
As mentioned this is US notebook series and as far as I know you have to press 0 button immediately after the notebook has been powered up.
This should start the recovery

TS3408 I am unable to use Safari because the web pages fail to load or does not load graphics. I am not pleased with the current Safari and will now have to use a secondary browser.

My issues is with multiple websites. Buttons do not work, pages do not load completly or the graphics are not visible. I need to use another browser such as FIrefox or Chrome.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Safari not opening properly - sticks halfway through loading

Hi there,
My Safari window on my iMac keeps opening but then the pages won't load fully - for eg, the start page comes up with the apple homepage which starts highlighting blue as if it were opening but then sticks halfway through this process.
Firefox is working fine though.
Help!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Safari Not Opening Pages That Require Login

Since I installed the latest security update Safari won't open a couple of pages I use to use all the time. Most notably the My eBay sign in page and the Bigpond Log In page and just now the Apple Login Page (I had to use Camino to get to here). When I click on these pages Safari just sits there trying to load but does nothing and after about 2min I get the spinning Beachball and have to Force Quit. Also if I press the stop button and try to load any other page other than those 3 it does the same thing. This only happens after I have already clicked on one of the above mentioned sites. I then have to quit Safari and restart it to get it to work. All my other tabbed bookmarks work, It's pretty much just these 3 and probably any other page that requires login.
I have deleted prefs and reset Safari, Repaired Permissions, Deleted Saft, Googled for this problem and found nothing and tried to find a way to reinstall Safari but found nothing.
Anyone got any other ideas.
Thanks

Try this - I was Having the same problems:
http://www.macfixit.com/article.php?story=20061204233133704
"Tuesday, December 05 2006 @ 03:00 AM PST
Security Update 2006-007 (#6): Login to secure sites fails (cont.) -- fixes; Problems launching Microsoft Office apps; more
Login to secure sites fails (cont.) -- fixes We continue to report on problems logging into secure (https) Web sites in Safari and other WebKit-based applications after applying Security Update 2006-007. Since this update makes modifications to WebKit, it's logically implicated in the difficulties.
Even more telling than the WebKit changes, however, is the resolution (in this security update) of a vulnerability where "certain revoked certificates may be erroneously honored." It appears Safari is -- instead of erroneously honoring bad certificates -- erroneously rejecting some certificates.
There's one more change in Security Update 2006-007 that could be implicated in this problem: a fix for a vulnerability where it may be possible to create an X.509 certificate containing a public key that "could consume a significant amount of system resources during signature verification. An attacker may cause a system to process such a certificate, leading to a denial of service."
In at least some cases, the issue appears to be tied to certificates issued by VeriSign. Safari is incorrectly interpreting some of these certificates as invalid -- with a mismatch in the certificate-listed host name and host name of the visited URL.
As such, one potential fix involves deleting certificate entries using Keychain Access, as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click on "Certificates" in the left-hand pane
3. Delete any entries from VeriSign, or any certificates with a red cross next to them
4. Re-attempt access to the problematic secure site
The most successful fix, however, involves deleting the file com.apple.security.revocation.plist from the following directory:
* ~/Library/Preferences
You can replicate this workaround to some extent without deleting any files by opening Keychain Access (as mentioned above) then navigating to its Preferences (under the Keychain Access menu), clicking on the "Certificates" tab and making sure that both "Online Certificate Status Protocol (OCSP)" and "Certificate Revocation List (CRL)" are turned off. However, some users have found that only deleting the aforementioned file works.
Unfortunately, in some cases, it may be up to certificate providers to update their certification methods for compliance with Apple's new, more stringent security standards."

Odd pop-ups and webpages that don't load?

I know that Mac computers cannot get a virus; however, I have been receiving very odd messages lately. I sometimes get random pop-ups that say, "Your Windows computer may be infected! Call now at this number!" I'm not sure if it's just an ad or some sort of spam, but it makes me uncomfortable because I tend to get the messages often. I unfortunately don't have an image of the pop-ups, though.
Another problem is the fact that I can't access ONE particular website. My wireless is fine, it works perfectly with other webpages, but that one website refuses to load. The website is 'Animal Jam,' and I've tried everything to allow the website to load for my daughter, but it just doesn't seem to work properly. The address bar just loads for a long period of time until Chrome says 'This website is not available.' Animal Jam has provided tips for technical problems (all of which I have tried): clearing the cookies, updating Adobe Flash Player, restarting my computer, etc., but nothing seems to work at all.
I've also tried testing it with different browsers, and they all yielded the same result. I know that the website is not tempolarily disabled, because it seems to be working for many of my daughter's friends who also play the game. This site also provides that the site is 'up' and running: http://www.isitdownrightnow.com/animaljam.com.html
Some help would be appreciated!

Most likely, you have a web plugin that depends on the Java runtime distributed by Apple, such as the Facebook video calling plugin or the "NexDef" plugin for watching baseball streams. If you no longer need the plugin, remove it, including its automatic update mechanism (if any) according to the developer's instructions. Otherwise, install Java.

Safari not 'remembering' webpages login/passwords

I am running Safari 4.0.4. On certain websites(Facebook & My Space among some) it will not remember the login info or show a box to remember it.
How do I get that to happen ?

I'm having the same or similar problem.
I have no idea what's causing it. It seems to have started after backing up my computer, for the first time, on a new external HD using the HD's included auto-back-up software (a 1tb My Book with "SmartWare" software, from Western Digital). There were other bugs which cropped up at the same time. SmartWare kept thinking it was being run for the first time, and Google Notifier kept forgetting my login information.
The problem with Google Notifier seems to have fixed itself, and I uninstalled SmartWare. The only problem left is with Safari.

SAFARI not displaying webpage

Hi,
I'm a librarian, who posts exam papers online using our library system.
The exam papers display in firefox, and ie7 but not in safari.
The link is:http://library.itsligo.ie/search?/rexampapers/rexam+papers/1,9,9,B/l962~1052226&FF=rexam+papers+business+and+humanities +20052006&1,1,,0,0
I only have a certain amount of editing control over that page.
there is a frameset and a redirect I believe on that page. Basically it should display a login screen, which when used , then redirects to a pdf document link.
I would appreciate any help, as a distance learning student can't get access. I told him to downlaod firefox in the interim, but I would like to try to fix the problem,
kind regards,
áine meehan
systems librarian
Institute of Technology, Sligo
Ireland

Try the Apple Developer Connection for forums about Safari web development.
developer.apple.com

Safari not opening webpages in tabs

Ok, so I've got Safari 4.0.4 and Snow Leopard 10.6.2 and Glims 1.0 build 23. I have set all my settings in Safari, System Preferences, Secrets, and Glims, to have Safari load new pages in tabs. HOWEVER, when I click on a link in, lets say, Mail, Tweetie, iChat, ANYTHING, it always loads a new browser window. This would be fine, but it is very cumbersome to have this many windows open, as I usually read 10 articles one after another.
The only way I can get a new tab to open is to Command+Click on a link in Safari and it will open just fine.
Any clues? Do I need to completely trash Safari and all its files and re-install it? Do I need to give up Glims?
Oh yeah, I also have Adblock Safari installed but it doesn't run because I haven't told Safari to run in 32-bit mode.

Any clues? Do I need to completely trash Safari and all its files and re-install it? Do I need to give up Glims?
There's nothing wrong with Safari, so deleting it won't solve anything for you.
Your Safari preferences file could be corrupt, so to find out and correct that, do this:
Quit all running applications.
Go to Home/Library/Preferences and delete the com.apple.Safari.plist file.
Restart Safari, setup your preferences again for everything, then test it to see if the problem continues.
And you shouldn't run Safari in 64 bit mode; you gain nothing except problems with plug-ins and Input Managers that aren't 64 bit compatible.

Mail on Lion does not save messages that fail to send

When I am not connected to the web if I am composing a message and hit send button Mail does not save the message, and just tells me that It could not be sent and discards it. This is really annoying. I am using 10.7.4. Anybody else experiencing it? Any way around it?
For example, if I am on a plane, and I want to compose my messages to be sent later, this will not do it.. I never had this issue on Snow Leopard.
Thanks

Thanks. This is helpful.. However, do you agree that this is bug? Because, if I accidentally hit "send" in the full screen view, it just discards everything I wrote, it seems like. This was not the case in Snow Leopard. It would just save it in Outbox. When it is not in full screen mode, it still seems to put in in Outbox. I think my solution is to avoid this full screen view. It sounded a good idea, but changing bevavior just becuase I am in full screen, I cannot get it.

Edge animation fails to load first time in Opera, Crome but work in Firefox and Safari, both localy and

Hi guys, I have quite a serous problem here, I have a Adobe Edge Animation (done in CC) that fails to load the first time in Opera and Crome but does work in Firefox and Safari. It fail to load every time coming from another page.
The problem persist both locally and online. It does work in preview every single time.
I you can push me in the right direction, that would be great.
Thanks!
Here you can see the animation:
http://tierraburritos.com/test/laCarta.html

It seems to because of a style insertion error in animate library/content
Is it possible for you to share/mail your files with us,we can isolate the issue.

Safari not refreshing webpages that fail to load.

Similar Messages

Maybe you are looking for