Safari on my iPhone 4 is stuck on one page. How do i get it going again?

Safari on my iPhone 4 has got stuck on one page. It wont respond when i try to enter a new address or google a question. I cant get it to show all the pages that are open and delete any. In short it wont do anything. What can i do?

Hooray! Of course! I should have remembered that all you ever have to do is switch if off and switch it on again!
Thanks a million

Similar Messages

My iphone is stuck at one page, how do you reset the iphone?

My iphone is stuck at one page, how do you reset the iphone?

iPhone User Guide (For iOS 5.1 Software)

My nano and iPhone4 were face to face for a few seconds and now my iPhone won't turn on. How do I get it going again? What happened?

My nano and iPhone4 were face to face for a few seconds and now my iPhone won't turn on. It doesn't do anything. I had just charged it. How do I get my iPhone going again? What happened?

Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

My download of Illustrator is stuck at 42% how do I get it going again?

my download of Illustrator is stuck at 42% how do I get it going again?

that's usually temp folders permissions issue.
here are some solutions, Re: creative cloud hangs at 42%
you can also check, Re: Creative Cloud hangs at 42% why? WINDOWS for more links to help.

HT201210 my iphone 4 has gone into restore mode and locked up. When connecting to itunes it tells me it is going to wipe my date and reset to factory spec. I have not backed my data up to itunes for age. (yes i know). How can i get it going again without

My iphone has gone into restore mode after accidently pressing backup. It tells me i will lose all my data. How to i get back into the phone and not lose my datea
i havent backed up in ages (yes i know thats flakey)

Birdman01 wrote:
My iphone has gone into restore mode .... How to i get back into the phone and not lose my datea
It is all too late...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

CS3: Table on more than one page - How can I get the UIDRef's of the pages?

Hi
I have a table over more than one page. How can I get all UIDRef's of the pages who contain parts of the table?
Thanks
Hans

Hi
Thanks for the answer.
- How can I get all page items of a table?
- One other question: If I have a table over two pages (side by side) there is only one page item of the table. Right? How can I get the two pages (UIDRef) in that case?
Thanks
Hans

Workflows are stuck, how do I get them going again?

Hi all, we are on ECC 6.0 and we had a situation a few days ago whereby suddenly the wf-batch id was no longer able to communcate with the production system and all workflows stopped.
When I look at them via swia, it shows that they are in status "Ready". I don't know how I can "kickstart" the processes again so they will continue on running again from where they were interrupted. When I look at the workflow log for the last workitem, the message says "execution interrupted".
Any ideas on how I can get these going again in txn SWIA?
Helpful answers will be rewarded with points.
Thanks,
Marty

Hi MB,
if problem is with WF-BATCH, then I think tell your basis to check the user-id.
I had a another issue with WF-BATCH, where I had to finally delete WF-BATCH and recreate it automatically from SWU3.
Please wait for Guru's to reply on ur thread.
Hope it might help.
Aditya

Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

Since the os7 update on my iPad, my safari is not right, it only opens one page at a time, crashes when trying to open more, it has no back button. Help

Well, I rebuilt the entire workbook... that was a few months ago and so far, the problem hasn't resurfaced. It really wasn't fun to do, but whatever glitch there was in the file, I eliminated it.
I think I should mention that I am using Office v.X, NOT Office 2004. I got a new Intel iMac this week and yesterday when I opened up my files, it opened up the test drive (a JOKE of a program if you ask me) Anyway, some of the very minor issues I had with Office v.X were solved in the 2004 version. (When opening up large multi worksheet files without Excel being already opened, the tabs have white text) Anyway, I am still going to wait for the universal version to come out, but it seems that the newer versions may have fewer glitches (as is to be expected)
At any rate, best of luck to you!

I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?

I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?

You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps.

Iphone 4 stuck in "recovery mode" how do i free it up without complete wipe and restore?

iphone 4 stuck in "recovery mode" how do i free it up without complete wipe and restore?

You can try doing a power recycle by pressing on the home button and sleep wake button simultaenously.
This will shut down the device you then may press on the sleep wake button to attempt to restart the device. This may or may not resolve the issue.
Good luck.

HT1766 my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?

my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?

Hello, fschris.
Thank you for visiting Apple Support Communities.
When experiencing issues updating or restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

My itv is stuck on one page

Why does my Apple TV get stuck on one page that says computer and apple itv

You've posted in a PowerPC old vintage system discussion area.
Do you have an Intel based Mac or a G4/G5 model prior to 2006?
If the computer is running OS X 10.7.5 or later, you may try to Force Quit the computer
by holding the power button down for about a minute. Then try to start the computer
in Recovery mode and if that is present, you can use OS X Utilities, and choose Disk
utility to see if repairing the hard disk drive helps.
Or from the original OS X install DVD, if you have a PPC Mac w/ OS X 10.5.8;
or if Intel Mac w/ optical drive & retail or original install-restore on DVD... Insert
the DVD and hold the C key down on startup to use tools on the Install DVD.
Or before going this far, on attempt to restart, try SafeBoot where you hold the Shift
key down after the start tone, and keep holding it until you see the login screen,
for your user password. Continue holding the Shift key down until you see Desktop
or Finder, then let the key go. This does may allow you to run Disk Utility from
the system in the computer, to see if repair disk permissions can help it.
You may have to use Recovery to attempt a reinstall of the OS X, if you have a
computer that is an Intel-based Mac. You posted in an older Mac area for items
built before 2006, that is before Macs had intel processors: they ran PowerPC.
Should the issue be the probability of whatever you were attempting to get, did not
make it, due to failure of the internet, or other issue, that may have timed out.
With poor or spotty internet, software or system updates or upgrade is problematic.
And if you were also using Wi-Fi, not an Ethernet connection, that usually is worse.
Since iOS is not a Mac OS X system, that is meaningless or not helpful in determining
anything about a Mac, or troubleshooting one. So actual related information is missing.
To supply info about your Computer, its OS X version, and other configuration specs
would help anyone else seeing your vague question.
Good luck

Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls

Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls or call to a new call

Is there a case on the iphone?
If so, then remove it and see if that solves it.
Otherwise, make an appointment at the genius bar.

IPhone 5s - does any one know how to delete a daily reminder?

iPhone 5s - does any one know how to delete a daily reminder?

Slide the reminder to the left and tap delete.

TS3700 Music in stuck on one song, how to get it to continue.

Music is stuck on one song, how to get it to continue.

The repeat setting can be found from the Nano's Now Playing screen. While playing a track, swipe to the left to bring up additional controls including the repeat and shuffle settings. See page 21 of your iPod's User Guide for more assistance on the repeat setting.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

Safari on my iPhone 4 is stuck on one page. How do i get it going again?

Similar Messages

Maybe you are looking for