Safari: Only works properly after reset. Why?

I am using Safari Version 5.0.5 (6533.21.1) on iMac OS X Version 10.6.8 (Snow Leopard) 3.06GHz Intel Core 2 Duo - 4GB 800 Mhz DDR2 SDRAM.
When I open Safari the homepage loads but if I try to click on ANY link or search in the address bar the spinning colour wheel (of doom) appears and will remain indefinitely. My only option is to FORCE QUIT. However if I open Safari and immediately RESET SAFARI via Safari Menu, it works fine and I am able to click and browse as normal.
I have deleted the entire app using APP CLEANER, downloaded and reinstalled it but the problem remains. Any help would be very much appreciated.

@Eric I am reluctant to try the DISK UTILITY as I have no idea what to do nor do I have the CD with me at this present time. Is this a common way to fix problems such as this?
@Juan No problem with Chrome, I don't have firefox.

Similar Messages

Yahoo is not working properly after reset also

yahoo mail is not working and open properly in firefox i had see a solution for this that is reset the fire fox but after done also that this is not working

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

SAFARI NOT WORKING PROPERLY AFTER SOFTWARE UPDATE

WHEN I GO TO A PAGE IN SAFARI, I HOLDS TRYING TO FIND THE PAGE. A FEW MOMENTS LATER IT STATES THAT I'M NOT CONNECTED TO THE INTERNET (which I am). WHEN I REFRESH THE PAGE, IT IMMEDIATELY OPENS UP. THIS STARTED TWO DAYS AGO RIGHT AFTER THE SOFTWARE UPDATE FOR SAFARI. SOMETHING VERY BUGGY HERE. HELP

User "Bee" gave this solution. I tried it and worked for me, although Safari is loading very slowly.
Good luck!
See if you have any of the following files. Just follow the path.
HD/Library/Application Support/Conduit
HD/Library/InputManagers/CTLoader
HD/Library/Receipts/ctloader.pkg
HD/Library/Receipts/<Toolbar name>.pkg
HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
HD/Users/<User name>/Library/Application Support/Conduit
If you do, trash them and restart Safari.

Re: Broadband only works properly after 2am

yep greedy bt sell more bandwidth than they actually have. leaving us like me
this is my 22:00 speed
Download speedachieved during the test was - 1.07 Mbps <-- THIS IS ACCEPTABLE TO BT (what a joke) i pay for 8mb but now get 1mb
For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
Additional Information:
Your DSL Connection Rate :8.1 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 7 Mbps
11pm i will probably be back up to 6mb but i race online with my mates at 7pm to 10pm well i use to and is why i declared war on BT
SLOW SLOW BT CONGESTED EXCHANGE THAT I SEEM STUCK WITH HOWEVER AT PEEK TIMES WHEN I HIT A VERY SLOW 1MB ON MY BT LAND LINE THAT COST ME AN ARM AND A LEG I CAN JUST DISCONNECT FROM IT AND CONNECT TO NEXT DOORS VIRGIN MEDIA UNSECURED D-LINK ROUTER AND GET A 2.6 CONNECTION. HOW ???????????????????? AND WHY????????????????? IF ITS CONGESTED HOW IS THAT EVEN POSSIBLE OR DO VIRGIN PAY BT A **bleep** LOAD OF MONEY.

When i moved into my home last year May i had 7.8mb and was paying for 8mb so i was a happy chappy, But they have just finished building 35 new homes in my village, As them homes sold, my broadband was getting slower and slower.
I never noticed the decrease in speed until other gamers complained that i lagged due to slow broadband so i did some speed test and was horrified to see such low figures. i can't race in simulator league rooms now due to this slow bt speed.
BT say the acceptable rate for my line is 0.6 to 7.15.
0.6mb would be a 60k max download rate and you would get that or very near to it with a 512k connection that would cost you a lot cheaper than a 8mb connection.
Why end up like me and pay for 8mb when your only get 2mb. you may as well just get their 2mb package.
BT are happy with their service to you as long as you are getting over 0.6 even if your paying for 8.0mb
Here are my bt test results for tonight.
No need to reply to this post john45 or imjolly or any other pro BT poster.
1. Best Effort Test: -provides background information.
Download Speed
2.18 Mbps
0 Mbps
7.15 Mbps
Max Achievable Speed
Download speedachieved during the test was - 2.18 Mbps
For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
Additional Information:
Your DSL Connection Rate :8.1 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 7 Mbps
If you wish to discuss these results please contact your Broadband Service Provider.
If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
Your test has completed please close this window to exit the performance tester.
Please visit the FAQ if you are unable to understand the test results.
SLOW SLOW BT CONGESTED EXCHANGE THAT I SEEM STUCK WITH HOWEVER AT PEEK TIMES WHEN I HIT A VERY SLOW 1MB ON MY BT LAND LINE THAT COST ME AN ARM AND A LEG I CAN JUST DISCONNECT FROM IT AND CONNECT TO NEXT DOORS VIRGIN MEDIA UNSECURED D-LINK ROUTER AND GET A 2.6 CONNECTION. HOW ???????????????????? AND WHY????????????????? IF ITS CONGESTED HOW IS THAT EVEN POSSIBLE OR DO VIRGIN PAY BT A **bleep** LOAD OF MONEY.

Broadband only works properly after 2am

Hi all,
I am having trouble with my broadband again.
i cannot play online games until about 2am because of latency/lag/delay
also bt sport keeps buffering and disconnecting
i thought this was fixed last time we had an engineer to switch the lines but its come back again
another thing ive noticed the broadband sometimes disconects when the phone rings
and ive never had a connection over 11 days.
i really want this sorted as FTTC is coming in may and it will surely effect that too?
thanks in advance

Yes sorry my mistake!
I have tried this and yes it does still disconnect but its not everytime it seems completely random ive also used a wired phone
I had an engineer a few months back and it fixed the problem for a week or so
he moved us onto a different line
its like something seems to build up and gradually get worse
im worried if I get fibre this will continue,it seems like a intermittent fault as my tests and stats are fine
Line state:
Connectedppp0_0
Connection time:
3 days, 22:26:31
Downstream:
6.586 Mbps
Upstream:
984 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
10.0 dB / 6.2 dB
Line attenuation (Down/Up):
39.6 dB / 22.9 dB
Output power (Down/Up):
20.3 dBm / 12.8 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
8503 / 907
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
29414 / 4753
Error Seconds (Local/Remote):
11408 / 27022

After installing 7 on my iPhone my Safari only works when I am at home near my network

After downloading 7 on my iPhone my Safari only works at my home network
I want to be able to get on Safari everywhere again

I talked to AT&T and Apple. ATT says its the phone and Apple says its not the phone.

ITunes / iPhone not working properly after newest update...

iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I updated my ipad with the latest ios 8 software but my App store and safari nolonger works properly how can go about it?

MY APP STORE AND SAFARI NO LONGER WORKS PROPERLY AFTER MY SOFTWARE UPDATE. WHAT WOULD BE THE CAUSE?

Can you explain the problems you are experiencing?
-Ethan

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Camera not working properly after ios7 upgrade in iphone 4s

Iphone 4S
Camera not working properly after iOS7 upgrade.
It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
help me to solve this problem

Have you tried a battery pull? If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Ipod touch screen not working even after resetting to factory specs

ipod touch screen not working even after resetting to factory spec. lock symbol appears at top

That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

Will the newest version of Safari Mavericks work properly with Snow Leopard?

Will the newest version of Safari Mavericks work properly with Snow Leopard?

Are you asking if you can install Mavericks on a machine running Snow Leopard?
Upgrade to Mountain Lion/Mavericks.
Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported.
Application Compatibility
You can also check which applications are PowerPC by going to the  menu, select About this Mac, click on More info…, then click System Report and select Software/Applications.
If you do decide to upgrade, make sure you do a backup before installing.

Safari: Only works properly after reset. Why?

Similar Messages

Maybe you are looking for