Safari opens but wont load pages

Ever since I've downloaded the latest software updates from Apple a few days ago, safari will open but not load pages 90% of the time. I have to force quit safari multiple times and try it again before it will finally open and load pages. what's up?

I am having the EXACT same problem. At first I thought my network had slowed down, and I was ready to switch to Cable from DSL to speed things up, but then I noticed that when I bring my work portable home and work on the same network, I don't have any problem--although it uses the same network. It's a Dell portable that uses Windows and I get the same speeeds I have gotten until recently on my Apple computers. I switched to Apple and bought a new computer for my daughter last year and one for myself this year to avoid the security problems with Windows XP, but now my service is so slow that even dial-up would be speedier and half of the time the page loads don't work at all. WHat's up with this? I tried Firefox, but it's really not much better after the first day.

Similar Messages

  • Iphoto will open but wont load

    My iphoto on my macbook will open but the gear circle just keeps turning and turning ... nothing happens, the pictures will not load, will not recognize iphone. I tried deleting the app and re-installing it but same thing happened. Help. thanks

    Try the following to see if you possibly have a corrupted iPhoto library -
    Launch iPhoto while holding down the option key on your keyboard.
    Select Create New... from the dialog that appears.
    See if it opens normally with a blank library. If it does, the problem is with the old iPhoto library.
    If that is the case, first thing to do is make a copy of your old iPhoto library, so you will have a backup if anything further goes wrong. Then relaunch iPhoto again holding down the option key and selecting the old library. You will get the gear circle again. Force quit and then follow the steps in this Apple article for rebuilding the iPhoto library.
    Best of luck.

  • Firefox just stopped working! It opens but wont load any sites and gives no error messages. internet working as using safari now.

    Was in the UK yesterday and Firefox was working no problem. Arrived back in Denmark today and FF has stopped working. Mac was closed down for the flight over. Firefox opens and does nothing.. when I click on a bookmark the address bar stays empty and the little search icon continues to rotate. Reset firefox and still get the same problem. I am using the same internet connection I used before going away! Please help!

    Check the connection settings.
    *Firefox > Preferences > Advanced : Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
    Do other browsers and services that can contact internet like e-mail work?

  • Only homepage in Safari opens but no other pages

    I have a 2009 MacBook Pro with Mac OS X. Airport shows that I am connected to the Internet, but when I open Safari, only the homepage opens. Firefox won't open any pages. This problem just started three days ago; I am using the same network as before, my roommates have no trouble using the Internet, and I have tried different networks to connect to. I can connect to the Internet without a problem on my iPad, so I don't think it is a problem with the Internet. Any ideas of how to fix this?

    I would try to enter the Network again and than try to ping maybe google or something?
    Open terminal: enter ping www.google.com, the result look like this:
    64 bytes from 74.125.39.147: icmp_seq=0 ttl=55 time=24.045 ms
    to abort press crtl+c if there are shown timeouts then you have no connection to the internet.
    Do you use Littlesnitch or any other Firewall? Disable them all and try again.

  • My ipod is connected to wifi but wont load pages, HELP ME, PLEASE!

    My iPod Touch 5th Gen IOS-8.2 says it is connected to the wifi and has the signal bars in the top left corner, but when I try to load YouTube or the App Store it says that it is unable to load. This happens on all networks, at mine and other people's. Please help me, its SUPER ANNOYING!

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect OK before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Firefox loads, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled no change. problem came after recent update. any help?

    firefox opens, but wont load any web pages. tabs say "untitled". page is blank below. uninstaled and reinstaled- no change. problem came after recent update. any help?
    ps. IE works as usual

    Problem solved from prior post. Firefox had become blocked somehow by McAfee firewall. Set to full access. Now works perfectly.

  • Safari opens but crashes when loading any page

    I recently upgraded to Safari 6.0 (7536.25) on Lion 10.7.4. Now Safari opens but crashes as soon as I try to load a page. I've tried most of the fixes that I could find in the recent posts:
    different pages to be sure it isn't page specific
    disabled all extensions
    renamed the extension folder so it wouldn't be accessible (even though all were disabled)I noticed that Safari recreated the folder still with all extensions disabled but just in case I clicked the Off switch at the top of the Extension list
    renamed cache.db to get a new one
    renamed webpageicons.db
    Reinstalled Safari from the link in one of the forum posts
    Please help!

    I forgot to include the crash report info:
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    VM Regions Near 0:
    -->
        __TEXT                 000000010fda9000-000000010fdaa000 [    4K] r-x/rwx SM=COW  /Applications/Safari.app/Contents/MacOS/Safari
    Application Specific Information:
    objc[1914]: garbage collection is OFF

  • Safari is slow to load pages ad even says not connected to internet but i am?

    safari is slow to load pages and even says not connected to internet but i am?

    How much free space on the startup disk?
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
    If you have anti virus software installed, that could be a factor.
    Try troubleshooting third party plugins. Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    Do you have Little Snitch installed?

  • IPhone will connect to network but wont load any internet pages.

    OK, I have an iPhone (1.1.1) and an apple airport graphite base station which is connected to a D-Link G604T router.
    iPhone will connect to the airport but wont load any internet pages. My iBook works fine on the internet when connected to the airport.
    Any ideas?
    Thnanks.

    Daniel Langer,
    Make sure the graphite base station is configured as a bridge, and not assigning IP addresses itself if the D-Link is doing DHCP.
    If it is acting as a router, you will have NAT occurring twice, which can have a variety of issues.
    Hope this helps,
    Nathan C.

  • Safari wont load pages after software update

    i've just updated my safari to 5.1.7 and now after the update it just wont load pages
    i tried to install an older virsion and the same thing happens
    also ive tried to fully remove the software and reinstall it.

    HI,
    Check for third party unsupported Safari add-ons, instructions here.
    http://support.apple.com/kb/TS3230?viewlocale=en_US
    quick moment i'll loose my network connection
    If you are using SpeedDowload, that could be a factor.
    Check download and upload speeds here.
    http://www.speedtest.net/
    Carolyn

  • Ipad connects to wifi but wont load up internet pages

    ipad connects to wifi but wont load up internet pages downstairs, but it does upstairs. Any suggestions?

    1. Turn off router for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Firefox 4 wont load page completely or play videos on youtube after clearing cache

    Firefox 4 wont load page completely or play videos on youtube and ive noticed its always after clearing cache. after a while it will start working properly but its kind of annoying. Know what the problem is?

    oh, there is still a pending issue with youtube unfortunately. I can play videos individually but if I click on a video that is part of a playlist it lags and then goes to a blank space where the video should be. Is that a flash player issue? So, I can play videos individually but not playlists.
    Any word on that would be awesome
    Thanks again
    E

  • Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should ty install op system 4 Powerbook G4-dont have discs- can I get them?other solution? OS 10.4.11

    Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should try install op system 4 Powerbook G4-dont have discs- can I get them? or other solution? Am using OS 10.4.11 Thanks for any help

    Hi
    I actually dont think its Lion (sorry i put that as couldn't remember) as not on that computer at the moment, its at home, I am at work. I know CS2 is compatable with whatever OS I am using because I can using CS2 indesign etc and I was able to use CS2 photoshop until I updated the Camino browser (I believe this is when it stopped working). I have CS5 but it wont work at all on my Powerbook G4.
    I can send a message later with the OS I am using and maybe you can suggest other help? They told me in the MAC shop to try and get the installation discs. They also said I would be able to get these via Apple's 'media replacement programme' which I cannot find anyway! To be honest, I am not even sure getting the install discs will work but I'll try whatever I need to try and get Photoshop working on it again!
    Thanks

  • What do I do to get my settings to open,it wont load....?

    What do I do to get my settings to open,it wont load....?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next would be to restore your iPod.

  • HT1338 Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should ty install op system 4 Powerbook G4-dont have discs- can I get them? or other solution?

    Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should ty install op system 4 Powerbook G4-dont have discs- can I get them? or other solution?

    Hi
    I actually dont think its Lion (sorry i put that as couldn't remember) as not on that computer at the moment, its at home, I am at work. I know CS2 is compatable with whatever OS I am using because I can using CS2 indesign etc and I was able to use CS2 photoshop until I updated the Camino browser (I believe this is when it stopped working). I have CS5 but it wont work at all on my Powerbook G4.
    I can send a message later with the OS I am using and maybe you can suggest other help? They told me in the MAC shop to try and get the installation discs. They also said I would be able to get these via Apple's 'media replacement programme' which I cannot find anyway! To be honest, I am not even sure getting the install discs will work but I'll try whatever I need to try and get Photoshop working on it again!
    Thanks

Maybe you are looking for

  • Logical and physical file paths

    Hi, can anyone elobrate me  on what are logical and physical file paths ?

  • Premiere Elements 10 crashing when using disk templates

    Hi there I have a really annoying problem when trying to use Premiere Elements 10 on my Mac I can import and edit video ok but as soon as I try to build a disk using one of the pre-installed templates Premiere Elements 10 crashes with the following m

  • Error adding Freight as Expense to Invoice in DI API after SAP upgrade

    Hi All, We recently upgrade from SAP B1 2005 A (6.80.320) SP: 01 Patch Level 36 to SAP B1 2007 A (8.00.178) SP: 00 Patch Level 42. A .Net application using the DI API has successfully created orders/invoices with Tax and Freight charges successfully

  • Block the Material at Item level in Sales Order automatically for delivery

    Hi! My business scenario needs a material to be Ckecked for Inspection after raising the Sales Order by thirdparty person. So, I need to block that particular material at Item level automatically for delivery and rest of the line items can get delive

  • Export with watermark not working...

    I can no longer export a photo with Lightroom 5.3 with my watermark.  I have tried unchecking and rechecking the watermark, and using a varieties of watermarks and photos. The photo will export just w/o the watermark. I have also closed out Lightroom