Safari Page Won't Load When Connected to Plasma TV as Monitor

I am a new Mac user and was hoping someone could help me with this issue. I have a MacBook Pro 13" laptop running Mac OS X (10.6.2) and the latest version of Safari (4.0.4) and when I connect it to my Plasma TV using the displayport to DVI adaptor, Safari pages never load. It just shows loading and finally gives an error stating that the server can't be found. If I immediately unplug the external display and reload the page, it loads fine. All other applications function and display fine. The resolution of the monitor is 1024 x 768. I have also connected the laptop to my HP 20" monitor using the same connection and everything works fine. Its resolution is 1280 x 800. My ISP is Comcast and it is being delivered using a linksys wireless router. Does anyone have any insight as to why this is happening or what I am doing wrong? Any help you can give me would be greatly appreciated.

Hello, SockMonkeyGirl.
Thank you for visiting Apple Support Communities.
I understand that you are unable to use your internet based applications when connected to the Comcast network only. I would recommend making sure that this Comcast network settings are updated to the recommend as outlined below. Also make sure that all firewalls are disabled as well.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/en-us/HT202068
Cheers,
Jason H.

Similar Messages

Safari - Pages won't load

Hi. I hope someone can help me
There are two websites that my sister visits frequently on my eMac. She has never had problems before and now the pages won't load. We've tried other sites and aren't having any problems. I've also emptied the cache and reset Safari and it still won't work. We thought that there were problems with the website, but a friend loaded both pages just fine on a different machine.
Can anyone help?

Have you tried using masking Safari as another browser to see if the pages the machine is visiting have been instructed not to show content if the browser is not one expected?
If you go to the Debug menu and select user agent, you can disguise Safari as another borwser. Also, from the Debug menu, you can use the Open page with menu to select the alternative browser you would like to use to open the pages.
Alternatively, you might contact the owners of the site(s). Also, you might go to the Safari menu and Report Bugs to Apple.

Ipad apps won't load when connected via Comcast wifi

We are trying out Comcast for 30 days. We already had Uverse so right now we have both. When connect via Uverse everything works fine on my iPad as always has. Internet access, apps load etc. when I switch over to the Comcast wifi, I can access internet just fine. Sped test are all hella fast. But for some reason a few of my apps/games won't load. for example I have a price is right bingo game. It will not load when connected via Comcast. I get an error that say it won't connect and to check my internet access. and my internet access will be working fine. If I switch back over to uverse the game will load. There are a couple other apps doing the same thing. Anyone seen this before? I have an iPad Air 2 on iOS 8.1.2

Hello, SockMonkeyGirl.
Thank you for visiting Apple Support Communities.
I understand that you are unable to use your internet based applications when connected to the Comcast network only. I would recommend making sure that this Comcast network settings are updated to the recommend as outlined below. Also make sure that all firewalls are disabled as well.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/en-us/HT202068
Cheers,
Jason H.

My web pages aren't loading when connected to the internet through Ethernet cable?

Yesterday my web pages stopped loading on Safari. I tried loading them on google chrome and had the same problem. I then deleted all saved web site data and reset Safari but this still didn't solve the problem. Finally I restarted with safe mode, where the web pages loaded, but slowly, however when I restarted normally the web pages still weren't loading or partially loading. To test whether this was my computer or the ethernet cable I was connected to, I connected to the wifi at my university, where the web pages loaded perfectly. Plus, when connected to the ethernet cable I could Skype, use Spotify etc., it is just the web pages that are causing a problem. Any suggestions how I can fix this? Thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */ /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ $\2$/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caught bu|GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|SATA W|ssert|Thrott|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Sub-par Safari (Pages won't load, 404 errors, and paritally loaded pages)

Hey,
I just upgraded to OS X 10.4.5 (from 10.2.8) and it's a wonderful change of pace! I can't believe I waited this long! I have only one complaint...Safari is TERRIBLE. I have found that when it browses it only partially loads pages, never loads images, all adds "cannot be found - 404 error code (which isn't necessarily a bad thing), and then sometimes the desired pages have different apperances, or won't load at all (again a 404 error code). On a few occasions it has even opened the same page repetedly! I go to apple.com, and it loads. Then I go to zdnet.com, and it loads apple.com (though it displays Zdnet on the title bar and the web address!)
Can anyone help me out here. I'd love to us the RSS feeds...but with all these bugs I can't even get through a session of use without becoming completely frustrated.
Thanks!
iMac G4 (17inch) Mac OS X (10.4.5)

Have you tried using masking Safari as another browser to see if the pages the machine is visiting have been instructed not to show content if the browser is not one expected?
If you go to the Debug menu and select user agent, you can disguise Safari as another borwser. Also, from the Debug menu, you can use the Open page with menu to select the alternative browser you would like to use to open the pages.
Alternatively, you might contact the owners of the site(s). Also, you might go to the Safari menu and Report Bugs to Apple.

Safari pages won't load since Mavericks upgrade

Installed Mavericks a few days ago on my iMac and some really annoying bugs have been introduced to Mail (7.3) and Safari (7.0.6). I can't automatically add multiple addresses to emails anymore using the space bar; I have to manually type out certain addresses, add commas, etc. Certain webpages, including youtube and google, won't load on Safari. Chat support had me repair permissions with disk utility, clear cookies and reset safari, but none worked. It was also suggested that I do an SMC reset, a PRAM reset, and a safe reboot. I haven't done any of these, basically because I'm nervous about introducing any more wonkiness that I can't undo. I've been reading about similar problems with Mavericks for months now (I only upgraded because I needed it for Final Cut) , but I never see any solutions. Can anyone help me??? Thanks.

Go step by step and test.
1. Power cycle
     Power off the router. Unplug it from the wall. Wait a while.
     Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
     It will take a   while.
     Restart the computer.
     Start up in Safe Mode
     http://support.apple.com/kb/PH11212
2 Empty Caches
    1. Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    2. Quit Safari if open.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Look for the folder 'com.apple.Safari"
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.
3. Turn off Extensions if any, and launch Safari.
    Safari > Preferences > Extensions
4. Remove all third party addons, plugins and anti-virus software
    Run EtreCheck .
    https://discussions.apple.com/docs/DOC-6173
5. Deselect Proxies if selected.
   System Preference > Network > Advanced > Proxies Tab
   Under "Select Protocol", uncheck any box if selected.
   Click "OK" then "Apply"
Best.

Web pages won't load when MacBook Pro on battery power

My sister bought a MacBook Pro in January. She switched from a Dell laptop. Everything was great until a few weeks ago. When she would be on battery power, she would have a hard time getting websites to load with Safari. I suggested she use Firefox and see if it made a difference. It didn't.
She can try to open a webpage and it will try to load for a long time (3-5 minutes). If she plugs in the power adapter, the page loads immediately. She still has her Dell laptop and the same websites load with no problem when using the Dell on battery.
I told her to call Apple since she has Applecare. Apple sent her a new battery even though they told her they didn't think it was that. It didn't make any difference. They told her it was her internet connection, but it works fine if the MacBook Pro is hooked up to the power adapter and her Dell laptop loads internet pages without any problem while on battery power. Then they tried to tell her just to use the power adapter all the time. She told them if she wanted to be tied down to a power adapter she would have bought a desktop. (Not a very good comment by Apple in my opinion.)
She doesn't live close to an Apple Store to take it in.
This is just the weirdest thing I have ever heard of. All of her other applications (Office, Photoshop, iTunes, etc.) run just fine on battery power. It is just the internet. At first I thought it might just be secure sites, like banking, but she couldn't get MacNN or Versiontracker to load while on battery power.
Does anyone have any ideas?

You'll probably find an Airport aerial issue. Does she find that Airport reception (a better guide is shown in Internet Connect) will drop dramatically when she disconnects power? If so contact AppleCare again and give them this information under the same case number she wuold have gotten when they replaced the battery.
PS In space, no-one can hear you scream!

Pages won't load when I type addresses

Firefox just updated itself to 10.0.1 and it has changed this. I used to just type twitter.com or amazon.com and the page loads. When I do this now, absolutely nothing happens. Even if I type the full address: https://twitter.com nothing happens. There isn't even an error message. If I go to google search, and then click on the page, it goes to it with no problem.
What is a pain is that it still has my history of frequently visited pages, but I can't use it now.
I'm sure there must be a setting which changed on Firefox, because this still works perfectly well with Chrome, but I can't find the correct setting.

Do you have the AVG Safe Search add-on?? If so, disable this extension in the Firefox Add-ons Manager. Ref:
*[[Latest Firefox issues]] under "Pressing Enter in the address bar doesn't work"
*http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=190478
See [[Troubleshooting extensions and themes]] for other ideas.

Why is it my home page won't load when I open, my back and forward buttons don't work, the tabs have no boarders, they just show text and I can't tell which one I'm on sometimes, I can't download things, and firefox won't remember tabs when I close it?

I've tried switching to an older version, re-installing the latest version, deleting add-ons, clearing my history and cookies, and nothing works. What the heck?! I didn't do anything, it just flipped out when I opened it!!!!

Create a new profile as a test to check if your current profile is causing the problems.<br />
See:
* [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

IWeb page won't load if password protected

Okay, so I finally found my problem - my web page won't load when it is password protected. But I have kids, so I want to make sure that only family and friends see the page. Is anyone else having this problem?
Thank you!

Here is a reiteration of the problem at hand, in case someone can help me figure this out:
My web page can be accessed from internet explorer on my husband's laptop, but I cannot access my webpage. It just keeps saying "loading" when actually it should be showing me the "user name" and "password" stuff. Safari just keeps spinning and "loading," but it never makes any progress, since I can't SEE the password dropdown request. Is this a Safari problem, an iDisk problem, or what??? Where should I post this so I can get help?

Page won't load in Safari

Hello,
I'm trying to open a page (http://drjeder.com) in the newest Safari under WINDOWS and the page won't load. All I see is a blank screen and a loading message (Other browsers can open it with no problem).
I then installed Safari (for Windows) on a different computer and it worked only for the first time, but after that it again wouldn't load. What causes this issue and how can it be resolved?
Thanks in advance.

I am getting the same problem on Safari 4 (but it works fine on the Mac), so any help anyone can provide that would be useful.
The page I am having a problem with is http://www.iwebvisor.com/assets.aspx (but you need to have navigate to it through the site starting at http://www.iwebvisor.com/start.aspx)
During testing we never had an issue with this it has just occured when we pushed this out for go live.
Something else I have found is I can not replicate the error when I am running Fiddler2 (http://www.fiddler2.com/fiddler2/) to monitor the HTTP traffic, and there are no errors in the IIS log on the webserver. Its driving me insane.

In safari, On my Ipad2,I get the error message, "too may redirects" and the page won't load. Anyone with advice? I have cleared the cache, cookies, and history and restarted.

In safari, on my Ipad2, I get the error message " too many redirects" and the page won't load. I have cleared the cache, cookies, and history and have rebooted and I still get the same problem. Any advice?

In safari, on my Ipad2, I get the error message " too many redirects" and the page won't load. I have cleared the cache, cookies, and history and have rebooted and I still get the same problem. Any advice?

When I start safari it won't load the screen.

When I go to start safari it won't load. The address bar lights up about a 1\3rd of the way and then just sits there. If I restart my computer it will work for a time but eventually refers back to the same behavior. I have tried reseting safari, I have tried to empty cache without success. Please help

Hi..
Try here > Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
One of the suggestions at that link is to try OpenDNS. It's very easy to setup.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
Try Safari.
If that didn't help, all you have to do is go back to the DNS tab and delete the addresses.
If nothing above helped, from your Safari menu bar click Safari > Preferences then select the Security tab. Deselect: Enable plug-ins
Quit thren relaunch Safari. If that helped, you need to troubleshoot third party add ons > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues

Certain Web Pages won't load for roughly 60 seconds

I was tempted to put this in the 'Safari' section, but after a little more trial I thought it went deeper than that.
The issue is, for about two weeks now, i'll be surfing the web and then head to one of my commonly visited websites (namely Wikipedia, Google, Huffington Post, and this website) and though I'm fully connected to the internet, the pages won't load and i get the "Server Not Found" noitce.
I don't, however, have this problem with ALL webpages when this is happening to the others. Gmail, Facebook, Mediaite, etc. all have no issue and they work just fine.
Primarily I use Google Chrome as my browser. So the first thing i did was clear the cache to see if it would help, but nothing changed. So i opened both Safari and Firefox and they both suffer the same problem. After about 60 seconds the issue goes away and all things are normal again. About 10 to 15 minutes later, if I'm still surfing the web, the problem may creep back up again. I can't say for sure but I've noticed that this typically happens when I first try to go to those pages after a few hours of not using the net.
When this happens, I've also tried loading these pages on my iPhone and iPad during the 60 seconds and have encountered the same problem.
Any help would be greatly appreciated.
Note:
Using a Wireless internet connection thru a cable modem.

Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Php page won't load but will in while testing

I have created a php page that connects to a db. While in
dreamweaver I can test the page and see the db content but can't
view the contents of the page if I got to the page via the website
www.mysite.com/testpage.php.
I have uploaded the connection files and the test file with
dependent files but the page won't load. Also I noticed that using
virtual for the php command doesn't work so I use include <?php
instead.
Since I can see the db contents via testing the page but
can't when viewing the page via www.mysite.com/testpage.php.
Can someone help shead some light on this??
UPDATE..
I removed the following from the PHP file and I was able to
get the page to load...
So what doctype should I be using??
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

cdembek wrote:
> but the page won't load. Also I noticed that using
virtual for the php command
> doesn't work so I use include <?php instead.
Dreamweaver uses virtual() if you have set your site
definition to use
site root relative links. Unfortunately, virtual() is
supported only by
Apache, so the fact that it doesn't work indicates that your
remote site
is probably on a Windows server.
When changing from virtual() to include(), you also need to
change the
link to your connection from a site root relative link to a
document
relative one.
virtual('/Connections/mycon.php');
needs to become something like
include('../Connections/mycon.php');
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Safari Page Won't Load When Connected to Plasma TV as Monitor

Similar Messages

Maybe you are looking for