Safari prompt for Microsoft System Tools 16.3846 - hack?

I have been having problems with safari recently as it sometimes refuses to refresh or load Facebook. The last time i tried i got the following prompt which looked suspicious. Needless to say I didn't download anything...

Try the suggestions by Linc Davis in this thread
Re: I think i go a malware , when i open you tube or Facebook i get a page with this message " To continue your web surfing,  please download and install this software."

Similar Messages

  • FYI Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413) Stops SCVMM service starting

    I just applied update:
    Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413)
    and (KB2965414) but it failed to install.
    After a reboot I could not login to the VMM and the service would not start
    An event id 0 was reported with:
    Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
       at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
       at System.Reflection.RuntimeModule.GetTypes()
       at System.Reflection.Assembly.GetTypes()
       at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
       at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
       at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
       at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
       at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
       at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
    After I removed the update the VMM was able to start, no reboot required.
    When I have time I will try to apply both updates again successfully and see if the issue still occurs.
    Vista Ultimate Dell XPS M1330

    FYI.  I've had the same issue after I installed Update Rollup 3 (KB2965413), seeing the exact same error on event log.  Tried to start the service manually, getting service unable to start error.  This is a machine running
    with Windows Server 2012 Standard.  Solution for me is simple. I just install
    KB2965414 (Update Rollup 3 for SCVMM 2012 R2), reboot the server, and the SCVMM service auto start up by itself. 

  • Firefox 29 constantly updates and prompts for a system reboot

    This issue persists even after uninstalling and reinstalling the latest version, 31. This has occurred on several different machines I support, and as far as I can tell most of them have no extensions that could be causing the issue.

    Try to run the Firefox program once as Administrator (right-click: Run as Administrator).
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    *Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • IOS prompts for a client certificate each time i change webpages on a site

    The company intranet is published through a TMG 2010 box and we use client certificates as an extra level of authentication in addition to AD user / pass.
    With any PC based browser you are prompted once for the certificate to use, however in IOS 5.1.1 on iphone and ipad we get a prompt each time you go to a new page, safari prompts for the certificate to use however the more times you change the page the more it relists the certificate in the selection window. The certificate you see in the screen shot is installed once. The first time I change the page, safari reprompts and lists 2 certificates (both the same) next time i change the page it then lists the certificate 3, then 4 then 5 times etc. The client certificate is issued directly from the root CA so this isnt the issue of IOS not supporting 2 or 3 tier certificates.
    All other PC based browsers work fine and only prompt once then happily reuse that certificate when you change pages without reprompting.

    We're experiencing the same problem.  We are also publishing internal web applications via TMG 2010, using forms based authentication with client SSL certificate authentication.
    We see this problem on devices using iOS 5.1.1.  Devices with iOS 6 are automatically selecting the client certificate.  Unfortunately upgrading to iOS 6 is currently not an option.

  • Prompt for username

    Im trying to use Safari on windows to sign into a website that uses basic authentication. The first time i log into the site, it prompts me for a username and password. If I close the browser, relaunch it, retype the address and click the login link, it doesn't prompt me for a password and sign me right in. I am NOT marking the remember password option not does a password entry appear in the browsers auto fill preference. The Internet Options for the machine via the control panel) is set to prompt. The only way ive been able to fix this is use the browsers Reset Safari option to erase my password. How can i make Safari prompt for a username and password?

    Thanks, Steve!
    A possibility (that I haven't been able to confirm yet) is that Safari might be interpreting some of these site log ins as "other forms". In that case, the offending password might be stored in a different location.
    Head back into the Autofill tab and click the Edit button next to "Other forms". Does an entry for the website in question show up in your list there? If so, try deleting that entry.
    With the entry deleted, try heading back to the site. Do you get prompted this time around, or is it another automatic log in?

  • Gnome-system-tools unstable upgrade

    its still on /opt/gnome dir???? why is that? why not compile the 2.18 system tools?

    i hope this will help
    # Generated by makepkg 3.0.0
    # Tue Apr 24 10:23:51 AZOST 2007
    #packager = SickHate <[email protected]>
    pkgname=liboobs
    pkgver=2.18.1
    pkgrel=1
    pkgdesc="lib for system-tools-backends"
    url ="http://www.gnome.org/"
    source=(http://ftp.gnome.org/pub/gnome/sources/liboobs/2.18/$pkgname-$pkgver.tar.gz)
    arch = (i686)
    license = GPL
    depend = (system-tools-backends)
    makedepends=()
    provides=()
    conflicts=()
    replaces=()
    backup=()
    build() {
      cd $startdir/src/$pkgname-$pkgver
      ./configure --prefix=/usr
      make || return 1
      make DESTDIR=$startdir/pkg install
    pkgname=system-tools-backends
    pkgver=2.2.1
    pkgrel=1
    pkgdesc="Backends for Gnome System Tools"
    arch=(i686 x86_64)
    url="http://www.gnome.org/projects/gst/"
    license=(GPL)
    depends=('perl')
    makedepends=('intltool' 'sed')
    source=(http://ftp.gnome.org/pub/gnome/sources/$pkgname/2.2/$pkgname-$pkgver.tar.bz2)
    build() {
    source /etc/profile.d/gnome.sh
      cd $startdir/src/$pkgname-$pkgver
      find . -name Makefile.in -exec sed -i -e 's/-scrollkeeper-update.*//' {} \;
      if [ -f omf.make ]; then
        sed -i -e 's/-scrollkeeper-update.*//' omf.make
      fi
      ./configure --prefix=/usr
      # lalala hack for always apply changes to the source, remove if it goes to extra.
      make clean
      make || return 1
      make GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1  DESTDIR=$startdir/pkg install
    pkgname=gnome-system-tools
    pkgver=2.18.1
    pkgrel=1
    pkgdesc="Gnome System Configuration Utilities"
    arch=(i686 x86_64)
    url="http://www.gnome.org/projects/gst/"
    license=(GPL)
    options=(NOLIBTOOL)
    depends=('libgnomeui>=2.9.0' 'libglade>=2.4.0' 'gconf>=2.2.0' 'system-tools-backends>=1.1.92')
    makedepends=('intltool' 'sed')
    source=(http://ftp.gnome.org/pub/gnome/sources/$pkgname/2.18/$pkgname-$pkgver.tar.bz2 )
    build() {
    source /etc/profile.d/gnome.sh
      cd $startdir/src/$pkgname-$pkgver
      find . -name Makefile.in -exec sed -i -e 's/-scrollkeeper-update.*//' {} \;
      if [ -f omf.make ]; then
        sed -i -e 's/-scrollkeeper-update.*//' omf.make
      fi
      ./configure --prefix=/usr --disable-network --enable-boot --disable-scrollkeeper
      make || return 1
      make GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL=1  DESTDIR=$startdir/pkg install
    works for me
    Last edited by sickhate (2007-04-24 23:04:38)

  • Microsoft System Center Orchestrator is free?

    If we already obtain SCOM 2012 SP1, do we need pay for
    Microsoft System Center Orchestrator?

    Hi,
    in System Center 2012 you require a license for managed devices. The devices can be managed with each component of System Center 2012 like SCOM, SCCM, Orchestrator ...
    Details here:
    http://download.microsoft.com/download/B/4/A/B4A98A4E-2F43-489D-8761-5362C8C2C328/System_Center_2012_R2_Licensing_Datasheet.pdf
    Regards,
    Stefan
    www.sc-orchestrator.eu ,
    Blog sc-orchestrator.eu

  • System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).

    I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
    It then gives me an error log of ;
    2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
    2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
    2015-04-23 14:44:06Z: Info: Exitcode = 0
    2015-04-23 14:44:06Z: Info: Logging ended.
    I have installed this software succesfully on other machines previously.....

    Hi RyanWelsh78,
    This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
    Thanks for your understanding.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I get Safari to prompt for cookies?

    I've always used Firefox, but would love to move to Safari for its iCloud integration, but  it's a major frustration and  a deal breaker that it doesn't provide an option to prompt for setting cookies. Every other major browser does. What's the deal?
    Does anyone know of an extension that will prompt me to accept or reject cookies before they're set? Is there a Terminal command I can run? Anything?
    I take my privacy seriously. Unless I am logging into a site, I have no desire to accept a cookie, especially from Google or Facebook who will sell their grandmother if they could make enough money and get away with it.
    I looked at these two based on another thread:
    http://www.macupdate.com/app/mac/31018/safari+cookies
    http://itunes.apple.com/us/app/cookie/id415585910?mt=12&ls=1
    At least in the first one (which is free) all it seems to do is let me delete cookies after the fact or on quitting and manually set cookies as favorites. But not setting something as a favorite doesn't seem to prevent the cookies from getting set, which seems to defeat the whole purpose.
    I don't want some big,  complicated mess or a pile of features that I have to fiddle with in every browser session. I just want this to work like it does in Firefox, or Chrome, or Opera, or any other browser. Prompt when a site tries to set a cookie and let me accept it or reject it. If I reject it, it stays rejected until I reset Safari. Why is that so difficult?
    I wish Apple would get over it's obsessive phobia of anything approaching an advanced feature or interface element and just make things work again.
    Sorry, didn't intend to rant. Just looking for help on this.

    I didn't see it as a rant ... you're justified.
    You can send feedback to Apple >  Apple - Mac OS X - Feedback
    As it is, Safari won't prompt for cookies.
    The settings are available in Safari > Preferences > Privacy

  • What are the IEDriver version requirements for using Microsoft Webdriver tool with a selenium based test tool?

    Hi,
    We are using IEDriver 2.44.0 with microsoft webdriver tool Windows7-KB2990999-x64.msu update with IE11.
    Using IMPLEMENTATION=VENDOR, we are not able to get this IEDriver version working with out selenium based test tool, with or without microsoft webdriver tool.
    I can see the driver IMPLEMENTATION set to VENDOR in the log, it also brings up the browser, but gets stuck there.Is this a known issue?ThanksTanvi

    Selenium is a third party software, so it is not supported in MSDN forum. It would be better consult to selenium's office website or forum. Some placa like here:
    http://www.seleniumhq.org/support/
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I trying to download Elements 12 and Premier it has the prompts for windows but I am on a mac with Maverick system do I need to download something else first and how?

    In trying to download both photoshop Elements 12 and elements Premier which I just purchased it only gives prompts for Windows I am on a mac with a Maverick system. Do I need to download something else first and how, and do I download it only once or for each program? Thanks for any advice.. really techno-nerd

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Sun Java System Connector for Microsoft Outlook 7.3 Update 1

    Good Day,
    Could somebody please advise me where I can download:
    Sun Java System Connector for Microsoft Outlook 7.3 Update 1
    Thanks,
    Gilbert

    Gilbert_Gerber wrote:
    I thought it is suppose to be part of Sun Java Communications Suite 6 update1?You can download it from the following location:
    http://wikis.sun.com/display/CommSuite6U1/Get+the+Software
    Select the Download Link => Platform: Windows
    Regards,
    Shane.

  • Safari 5 stopped prompting for file name when downloading.

    Hello,
    On Safari 4, when I clicked a download link, Safari always prompted for a file name, so I could change it before starting downloading, I installed Safari 5 and "this" feature dissapeared. Can anyone help?
    Thank you in advance,
    Alex

    Works for me: Right-click on the Paint.NET download file here. http://www.dotpdn.com/downloads/pdn.html
    It opens a menu. I click Download Linked File As... and change the name. It downloads.
    What experience are you seeing?

  • Double prompts for Exchange 2013 migrated users: "The microsoft exchange administrator has made a change that requires you to restart outlook"

    I have Exchange 2010 SP3 in my environment and am migrating to Exchange 2013. Whenever a mailbox is migrated, the Outlook 2013 client will prompt the user with a "the exchange administrator has made a change that requires you to restart
    Outlook". When the user does so, he or she is prompted again. After he or she closes and reopens Outlook for the second time, the issue is gone permanently.
    I've seen a number of other posts about repeated prompts like this but I haven't yet found one or someone gets exactly 2 prompts for each client and no more.
    A couple of pieces of information that may be relevant:
    1. On exchange 2013, the authentication method for the internal host name is NTLM
    2. I have not yet migrated public folders from Exchange 2010. I plan to do that after the mailbox migration is complete.
    Thanks in advance for your help.

    Hi,
    From your description, after mailboxes are moved from Exchange 2010 to Exchange 2013, users receive the following prompt when opening Outlook.
    The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook.
    In order to solve this issue, you need to apply the Outlook update that is described in KB 2863911.
    For your reference:
    Outlook 2013 cannot connect after an Exchange Server 2010 mailbox is moved to Exchange Server 2013
    https://support.microsoft.com/kb/2934750?wa=wsignin1.0
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Microsoft BizTalk Adapters for Host Systems Missing with BizTalk 2013

    Hi All,
    I am using BizTalk 2013 and looking  for Microsoft BizTalk Adapters for Host Systems but cannot find it on Installation disk.
    Do any one has idea how to go ahead with this .
    Thanks
    Abhishek

    Hi Abhishek,
    As far as what we can experience, there is not standalone download for
    BizTalk 2013 Adapters for Host Systems 2013. Its part of the
    Host Integration Server 2013 installtion.
    HIS 2013 installation
    document’s official
    “Existing Product Upgrade
    This release supports an in-place upgrade of earlier versions of HIS. The Host Integration Server 2013 setup automatically
    upgrades your existing configuration. The following releases are supported for automatic upgrade.
    Host Integration Server 2009
    BizTalk Adapters for Host Systems 2.0
    When you run the installation setup for
    Host Integration Server 2013, we will get the information like the following. In my server I already have
    BizTalk Adapters for Host Systems 2.0 (as per the requirement),
    hence this installation wizard tries to upgrade it to make it compactable with 2013.
    When you proceed with the installation, this will install/upgrade the BizTalk adapter to 2013.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Maybe you are looking for