Safari quit and screen went black
Was browsing the internet, then Safari quit,then screen went black and system froze.managed to start up again, by unplugging power, but my question is why that should happen ?.
Any help?
When the screen went black and froze, was the power still on to the eMac or did it shutdown on its own? I'd first check the simple stuff: check the power cord is fully plugged in. Kind of hard to do that after unplugging the computer, I know. But check that both ends of the power cord are fully seated --- some people have noted being surprised that the power cord on the eMac end goes as deeply into the socket as it does. Is your eMac plugged into a surge protector under your desk or table and by your feet when you're using it? It's not unknown for people to bump their foot aginst a surge protector's reset button. Related to that, check all the cables attached to the eMac and make sure they're fully seated.
You may also want to run the Apple Hardware Test as a check.
Similar Messages
-
I turned my safari off and iphone went black how do i fix this
i turned my safari off and iphone went black how do i fix this
Hi there sbrianbald,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W. -
I downloaded 8.1 and screen went black
When I downloaded 8.1 my screen went black. When I am lucky enough to turn it off and turn it back on the screen might stay on for a few seconds but not enough to reset the phone.
Try a reboot press & hold power button & menu button hold both down until you see Apple Logo you will not lose any data You may need to do this more than once. Bsydd uk
-
Was using my iphone 4 and screen went black and cant power down any help
my i phone just went black cant power down
Hi rickhead!
Here is an article that will help you with some troubleshooting steps for this issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Display has no backlight or dark screen
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
HT4061 Just updated to ios7 and screen went black??? help
I just updated to ios7 and my screen went blank. What should i do?
Basics from the manual remain the same: restart, reset, restore.
-
Brother threw iphone and screen went black but still can hear vibrations/ring.
also i tried doing a hard reset but my home button is off and it registers as voice control. cant connect to itunes because of passcode. i need HELLPPP??!
Try a reset of the device by pressing and holding the home and power buttons for about 15-20 seconds. The white Apple logo should appear.
It this does not get the display working make him buy you a new iPhone.
Apple does not repair devices they replace them.
If the device cannot be accessed due to a passcode and the screen is non-responsive there is nothing that can be done. -
I have a 5 month old iMac running Lion and W7 with the latest version of boot camp . It has been operating flawlessly until I went to reboot into Mac tonight. Screen went black, and system is unresponsive. I've tried force quitting and turning power off. Hard drive starts, there's a small amount of drive activity and that's it.
Hi Jane, your info may still be there, look in the Users folder at root of the drive, how many users are there there?
It sounds like this may have happened...
Return to default desktop, apparent "loss" of home directory, (it can happen spontaneously too)...
http://docs.info.apple.com/article.html?artnum=107854 -
When I added a contact to my contacts, took a picture and added Ringtone, pressed done, the screen went black and I am not able to access contacts. I turned off the ipad but still cannot access contacts.
I don't fully understand what the System Reset does but I've found that it cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark. -
We just moved from the United States to Costa Rica. The first two days my mac worked great. Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again.
This computer was brand new in June. Is it the humidity??? What can I do. Please help!!!!No guarantess but try smc and pram resets,
-
my iphone fell on the floor and the power botton wont work and also the screen went black i already tried to reset it throun itunes but the phone did not connect and i dont know what to do
You can take it to Apple and get replaced as long as you pay for the replacement.
Allan -
I just went to update my iPhone 5S as it asked me to, and it got to the point with the apple logo on the screen and the black loading bar underneath, but then the screen went black and the phone now won't turn on? I went to plug it into my computer and it said "USB Device not recognised"..
PLEASE HELP ME! It's 1am here in england, I need to be up at 6am for work and won't be able to get up without an alarm... my only option is so stay awake!Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?
-
My iphone's screen went black and now it won't stop vibrating..
My iPhone's battery was at 20% and I tried calling my fiance and the phone's screen went black. When I tried turning it on/off, it starting vibrating out of control, and it still is. I tried plugging it in but iTunes can't detect it. Help!!
hold down the two buttons past the sliding powere bar If it dont work let the battery run down
-
I installed ios7 on my iPad 2 yesterday, this morning it wouldn't open the weather channel app. I thought maybe I should power it down. When I held down on the power button the screen went black and now it won't do anything. What do I do now?
Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
-
Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?
- Let the battery fully drain. After charging for at least an hour try here:
iOS: Not responding or does not turn on -
ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
HOw to make an Object oriented alv respond to double click
Hi all, HOw to make an Object oriented alv respond to double click.SAmple code will be helpful. Thanks in advance, Alex.
-
How do I set a customized lock screen in iOS7?
How do I set a customized lock screen in iOS7?
-
The file "itunes library.itl" canot be read because it was created by a new version
The file "itunes library.itl" canot be read because it was created by a new version
-
I am trying to do bulk insert to MS Access database from text file. One of the solutions recommended by bbritta is as follows import java.sql.*; public class Test3 { public static void main(String[] arghs) { try { Class.forName("sun.jdbc.
-
WebDynpro ABAP : Table with DropDownByKey does not have neat focus
Hi Experts, I have a table, with one column of type dropdownbyKey, i need this so that i can display the DESCRIPTION rather than key. Issue is when i select a ROW in this table i see a special YELLOW BG COLOR on all columns except the column that has