Safari reader prints only blank page

Da qualche giorno l'applicazione Reader, pur visualizzandomi la pagina, al momento della stampa stampa solo pagine bianche.
Come posso rimediare?
Ho già provato a reinstallare Safari, ma non è cambiato nulla.
Grazie

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Similar Messages

My HP LaserJet 1018 has started printing only blank pages.

My HP LaserJet 1018 has started printing only blank pages.
Help?
Using Windows XP (Home Version)
Product # CB419A

Could be a number of issues. First could be a bad or not connecting transfer rollers which moves the toner from the drum to the paper. Only way to test is a half test by putting paper on the manual tray and printing a self test. When the back edge enters the printer, open the toner door to stop printing. Remove the toner and flip back the cover over the toner drum to see if there is any image on the drum. If image is present then it could be transfer roller issues. Use the service manual and look under engine diagnostics in the index and it will direct you to a page that shows how to perform an engine test. Do the test to see if you get a sheet of paper with lines on it. If you get lines, then the issue could be the formatter. If no lines and the shutter has been removed then I would think you are having high voltage issues. You may have to bring the printer in for service.

HP 6510 printing only blank pages after changing print cartridges

Hi,
My HP 6510 is printing only blank pages after I installed new print ink cartridges. I tried cleaning the print heads, aligning the printer... which did result in some pages printing with a little color (but it seemed "off" to me). That said, when I try to print a regular document from my PC it only prints a blank page.
I can't seem to figure this one out on my own - please help!
Thanks!
Chloe

The document here may help resolve black not printing on your Photosmart 6510. Be sure the cartridges are vented as shown in solution two.
Is your printer still in warranty? You can check with HP's warranty tool here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Photosmart All in one C4780 Printer prints only blank pages, connected to a MacBook Pro

My Photosmart C4780 all in one printer which is connected by USB to my MacBook Pro OS 10.6.8 prints only blank pages, and no text; I have turned it on and off; disconnected and reconnected; uninstalled the HP software and reloaded and updated drivers, firmware and patches. The scan function works and scans the document to my Mac. The copy function also does not work; when I press the OK function next to the copy icon, nothing happens

Hi mpmehta
I understand you are not able to print in black and the copy function isn't working.
I will be happy to assist you with this.
Make sure the printer is connected directly to wall outlet. (don't use a power hub or a surge protector)
Try and print a hardware self test on the printer to find out if it is a hardware or
software issue. Click Here.
I have included a document for not being able to print in black.
Here is a document for the copy function not working.
If you require further assistance please provide the following so I can assist you better.
Did the configuration page print?
Any black print on the page?
What are the ink levels?
Are you getting a error when trying to copy?
Please let me know the results.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Safari for windows printing only blank pages

Safari for Windows 5.1.1 will only print blank pages from my PC. Every other app prints perfectly to my networked printer and the printer shows up in Safari, but nothing on the paper. Any help??

Never was able to fix it, Juan. Safari just would not print on my Windows computer.
But I finally found another solution. I've switched from Windows computers to Macs and now I have none of those compatibility issues. I do have a few others from time to time, but no more Windows issues.
Buena suerte amigo

Hp 3510 prints only blank pages from i-pad, but works fine with xp configured lap top. why? help!

i have an hp3510 wireless printer that worked fine with both my i-pad and on my laptop when 1st installed. now it will only print blank pages with the i-pad although it still works fine when using my xp configured laptop. can anyone tell me how to correct the i-pad problem so that i can print wirelessly using that device?
thanks!
This question was solved.
View Solution.

I would start by powering down the Apple device, make sure that you hold the power button down, and slide the bar on the screen to "Off". If you have more that 1 iOS device that you use with the printer (like another iPad or an iPhone) power them down at the same time. Then turn them all back on and try to print to the printer.
If still having a problem, I would then power down the printer, router, and Apple device.
1. Unplug the router, (most do not have an on/off button)
2. power down printer and Apple device
3. Wait about 20-30 seconds
4. Plug router back in and wait for it to be fully operational and all the light on it back as they were before unplugging it.
5.Power printer and apple device back on (check to settings of iPad to make sure that it is still on the same network as printer and that "Ask to join other networks" is ON).
6. Reattempt to print
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Why does the HP Officejet Pro 8500A Plusw sometimes print only blank pages yet sometimes works fine?

The subject line pretty much explains it. Sometimes I can't print at all, just getting sheet after sheet of blank pages from the printer, even if I tell the printer to cancel printing.
Sometimes it works just fine.
Today was one of the blank page days. Help!
Thanks!

Let's start by resetting the printer. Turn it off, hold the # and 6 keys while and a bit after turning it back on.
What router brand/model are you using? What operating system on your computer?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printing only blank pages and Page setup dialog box is black

When I go to firefox - Print - Print preview - Page setup OR
Firefox - Print - page setup
This dialogue box is black. I can't move or adjust it. Nothing is on that screen.
When I print a webpage (ctrl P, or Firefox, print) nothing is printing.
I tried a suggestion of resetting by following the instructions here. That did not work.
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

I just experienced this problem, and stumbled upon the cause and the fix. When I went to "File" and then "Print Preview" I was getting a "black" screen where the preview should have been. I tried the suggested fixes related to about:config printer settings and add-on's, etc... but it did not help.
Then, I looked at the "Page Set-up" when I was on the "Print Preview" page. The bottom margin (for whatever strange reason... have no clue) was set at a huge number of inches... like 43801.4 or some such. I changed it back to 0.3 inches... fixed it. Can print just fine now.
So... if all else fails: check your margin settings on page set-up.

Only blank page printing

We have a Ricoh Aficio MP C2000 , there is only one page with somthing and then he print only blank pages till box is empty

Hello there, fritspen.
The following Knowledge Base article offers up a great, in-depth list of steps for troubleshooting issues with printing in Mac OS X:
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

When I select print from any website article while in Firefox it only prints a blank page. When I open same web pages using Safari, they print fine. Documents in other appliations print fine. Only Firefox documents print blank page.

When I select print from any website article while in Firefox it only prints a blank page. When I open same web pages using Safari, they print fine. Documents in other appliations print fine. Only Firefox documents print blank page.

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running Mac OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of Mac OS X, select Go ▹ Go to Folder… from the Finder menu bar and enter “~/Library” (without the quotes) in the text box that opens.
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.

My psc2115 only prints a blank page except from toolbox in diag mode

hi any one with an suggestions please, i have a psc 2115 all in one it goes through the motions for printing but only prints a blank page except from the laptop on a network share, iv tried new drivers, tried microsoft fixit, tried the hp diag software, still not working, its just printing a plain page, in print preview it shows the page that its gonna print then prints a plain page. tried all the hp support and the MS technet and it still dosent work , on the network share it only works from the wifes laptop (win 7) it prints ok. on my workstation (xp pro) it prints from the toolbox diag screen it will print a diag test page. ive un-installed and reinstalled the driver iv rest factory settings, im out of ideas fro the moment, any ideas please

Hello Burnhug 54,
Thanks for the post. With this one, I've included a document below that should assist with this one. It was some very good basic t-shooting tips. If after going through these steps, you are still getting blank pages, then be sure to check your driver from control panel and from one of your applications. Ensure that it is indeed the PSC2115. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en&product=91430&tmp_t...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=buu05210&tmp_task=solveCategory&cc=us&dlc=en&lan...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

MY PIXMA iP4000 not printing--paper feeds and steps through but only blank pages

The printer sounds like it is printing----you can hear the print head moving---but nothing prints....
pages are completely blank. Reseated the connections, no effect. Took out all the cartridges, reseated
them, no effect. Still only prints blank pages. Connected it to another computer, same---only blank
pages...nothing, not even a test page or nozzle page will print. Any ideas? Was working fine
on Monday when I went out of town until Friday. When I tried to print on Saturday morning, only
blanks pages. Just spent a small fortune on ink for the printer and would hate to trash the
printer, but can't justify spending more than the price of a new one to have the old one fixed.
PS The printer is connected to my USB port, as it was for the past several years when it worked
fine. Totally stumped/

Thanks, Michael, however, I was on the phone with Canon for some time, and could not get the printer to do anything even off line. Was told the iP4000 is over 8 years old and there are no parts available to repair it.
So I have already replaced the printer with an iP2702 that was on sale at a nearby
mass merchandise store. I was intending to replace the iP4000 eventually anyway, as the red was
not printing as vividly as it once did...more like a purple. Thought at first it was because I was using
3rd party ink, but even after replacing the magenta cartridge with "genuine Canon", the red was still
not as vivid as when it was new.
Unfortunately,as you know, the iP2702 got uses a more expensive combined color cartrdige
rather than the separate ones in the iP4000.
I am suspecting the reported failure of my iP4000 to print may be due to the third party cartridges
which I was told do not contain a "chip" as do Canon cartrdiges and that may signal to the printer
to suppress printing.
Strange, as I have been using 3rd party cartridges for some time prevbiously without any problem.
H. Singer

LR 4 only prints a blank page on Epson 2880. Print preview panes remain blank. Window 7 OS. Need help desperately!

LR 4 only prints a blank page on Epson 2880. Print preview panes remain blank. Window 7 OS. Need help desperately!

Bob
Thank you for your kind consideration of my problem. Up until the software started to print blank pages the preview pane always showed the selected print within the selected layout. Something has changed. Lightroom will print to the JPEG file but only a blank page on the Epson 2880. I've been in contact with Epson support and an IT tech and they tell me the problem is with Lightroom. I'm at my wits end and thinking of upgrading but the glitch may carry over. Uninstalling and reinstalling and deleting the preferences file did nothing to rectify the situation.
Thanks again!
David

When I open safari, I get a blank page and the beach ball.

When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet.
Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

When I save a Word 2010 doc as a pdf file, it opens up in Adobe Reader as a blank page, no text, no background etc.

When I save a Word 2010 doc as a pdf file, it opens up in Adobe Reader as a blank page, no text, no background etc. I am logged on as the Administrator, running Windows 7, using Microsoft Home and Business 2010.

You were right, it was a Microsoft problem.
I got it...I am now able to save a Word 2010 document as a pdf file. Here is what I did/found:
In Word, go to File, Options, Display and make sure that "Print drawing created in word" is CHECKED.
Mine was unchecked and when I checked it everything came back and is working as it did before. The only thing I can think of is that a Microsoft Update may have changed this selection...I know I DID NOT make any changes in the options.
One other thing I noticed in my saved documents folders was that a lot of my files showed up as PDF's and would still not open until I selected one and told it to default to open as a word document and then they all changed back and I was able to open them in word again.
I hope this helps others out there.

Safari reader prints only blank page

Similar Messages

Maybe you are looking for